Citrix 1Y0-A09 Implementing Xen Server Enterprise Edit Exam Set 2

What must an administrator configure on the pool master to allow migration of virtual machines (VMs) between servers in the pool?


Options are :

  • NIC bond
  • Management Interface
  • High availability
  • Shared Storage

Answer :Shared Storage

An administrator recently created an ISO library for a XenServer environment. The administrator now wants to make the ISO library available to all XenServer hosts. What must the administrator do before the ISO library can be attached using XenCenter?


Options are :

  • Build a directory to copy the ISO library into
  • Create an external NFS or CIFS share directory
  • Make an exploded network repository using FTP
  • Copy the ISO library to the control domain

Answer :Create an external NFS or CIFS share directory

In which two ways can an administrator restore the XenServer metadata from a backup?


Options are :

  • Using the Storage properties panel inXenCenter
  • Selecting the Restoring Virtual Machine Metadata menu item in theXenServer Console
  • Running the new storage Wizard inXenCenter
  • Entering thexe-restore-metadaga command in the XenSever Console

Answer :Selecting the Restoring Virtual Machine Metadata menu item in theXenServer Console Entering thexe-restore-metadaga command in the XenSever Console

In which two ways can an administrator backup the XenServer metadata?


Options are :

  • Using the Storage properties panel inXenCenter
  • Running the new Storage Wizard inXenCenter
  • Entering thexe-backup-metadata command in the XenServer Console
  • Selecting the Backup Virtual Machine Metadata menu item in theXenServer Console

Answer :Entering thexe-backup-metadata command in the XenServer Console Selecting the Backup Virtual Machine Metadata menu item in theXenServer Console

Which two physical hardware configurations are supported by XenServer Enterprise Edition 5.0?


Options are :

  • 32 CPU Cores
  • 256GB RAM
  • 32-bit architecture
  • 64-bit architecture
  • 128 CPU cores
  • 512GB RAM

Answer :32 CPU Cores 64-bit architecture

Citrix 1Y0-A22 XenApp Advance Administration Practice Exam Set 1

An administrator must ____________ on the virtual machines to return performance data to XenCenter.


Options are :

  • Enable logging
  • Set the system alerts
  • InstallXenServer tools
  • Configure the management interfaces

Answer :InstallXenServer tools

Which three performance data points can an administrator locate for a virtual machine in the performance tab in XenCenter?


Options are :

  • High Availability Status
  • CPU Usage
  • VCPU resources allocated
  • Memory Usage
  • Disk and Network I/O

Answer :CPU Usage Memory Usage Disk and Network I/O

An organization has a single installation of XenServer Enterprise Edition 4.0. The administrator plans to upgrade the host to version 5.0. Which upgrade path should the administrator take?


Options are :

  • Upgrade theXenServer using Emergency Mode
  • Upgrade to version 4.1 and then upgrade to version 5.0
  • UpgradeXenCenter to 5.0 and use the Updates Manager
  • Upgrade directly from version 4.0 to version 5.0

Answer :Upgrade to version 4.1 and then upgrade to version 5.0

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 1

In which scenario should an administrator choose to suspend a virtual machine (VM)?


Options are :

  • Orderly shutdown of the operating system on the VM is needed
  • Orderly shutdown of the operating system on the VM is needed
  • The administrator wants to store the memory image on the virtual disk of the VM
  • The administrator needs to restart the VM on the sameXenServer host each time the VM is started

Answer :Orderly shutdown of the operating system on the VM is needed

Which two XenServer CLI commands are valid?


Options are :

  • Pool-backup
  • Pool-ha-enable
  • Pool-recover-slaves
  • Pool-create-pool

Answer :Pool-ha-enable Pool-recover-slaves

Which storage repository type allows an administrator to create a new storage repository that does not erase any existing data on the specified storage target?


Options are :

  • EQUAL
  • NetApp
  • NFS
  • EXT

Answer :NFS

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 2

An administrator created a template of a Microsoft Windows XP SP3 virtual machine (VM) and now needs to modify it. How can the administrator modify the template?


Options are :

  • Create a new VM based on the original template, make the changes to the new VM and turn the new VM into the new template
  • Put theXenServer host in Maintenance mode, make the changes to the VM template and then exit Maintenance Mode
  • Export the template from theXenServer host, import it to another system, power it on and make the changes
  • Power on the VM template, make the changes and save the template

Answer :Create a new VM based on the original template, make the changes to the new VM and turn the new VM into the new template

An administrator enabled Remote Desktop on a Microsoft Windows Virtual Machine (VM) and now wants to use RDP in XenCenter. From which tab in XenCenter can the administrator enable an RDP connection?


Options are :

  • General tab
  • System Properties
  • Control Panel
  • Console tab

Answer :Console tab

An administrator needs to set up a storage repository that can be accessed over the network. Which storage repository type should the administrator use?


Options are :

  • NFS
  • NetApp
  • iSCSI SAN HBA
  • Fibre Channel SAN

Answer :NFS

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 3

An administrator created a template of a Microsoft Windows XP SP3 virtual machine (VM) and now needs to modify it. How can the administrator modify the template?


Options are :

  • Put theXenServer host in maintenance mode, make the changes to the VM template and then exit Maintenance Mode
  • Export the template from theXenServer host, import it to another system, power it on and make the changes
  • Create a new VM based on the original template, make the changes to the new VM and turn the new VM into the new template
  • Power on the VM template and make the changes and save the template

Answer :Create a new VM based on the original template, make the changes to the new VM and turn the new VM into the new template

Which two steps must an administrator take to create a Microsoft Windows Virtual Machine using the XenConvert Physical to Virtual (P2V) conversion tool?


Options are :

  • RunXenConvert on the physical Windows machine
  • Modify device drivers
  • Reboot the physical machine
  • Import the template or image into theXenServer host

Answer :RunXenConvert on the physical Windows machine Import the template or image into theXenServer host

Which is the best way for an administrator to ensure that NIC failover is enabled for all virtual machines (VM) in a resource pool?


Options are :

  • Create a NIC bond within the VM against a single virtual NIC
  • Create aXenServer network that is bonded across two physical NICs and ensure the VMs are connected to the network
  • Enable link aggregation for each VM
  • Manually add a network bridge and attach all NICs to it

Answer :Create aXenServer network that is bonded across two physical NICs and ensure the VMs are connected to the network

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 1

Which two physical hardware configurations are supported by XenServer Enterprise Edition 5.0?


Options are :

  • 256GB RAM
  • 128 CPU cores
  • 64-bit architecture
  • 512GBRAM
  • 32-bit architecture
  • 32 CPU Cores

Answer :64-bit architecture 32 CPU Cores

Which step requires an administrator to enable maintenance mode on a XenServer host?


Options are :

  • Enabling storagemultipathing
  • CreatingFibre Channel storage repositories
  • Enabling high availability
  • Creating NIC bonds

Answer :Enabling storagemultipathing

Which is a valid MAC address?


Options are :

  • 6A:70:A0:5E:D0:04
  • 6A:70:A0:5E:D0
  • 255.255.255.255
  • 127.0.0.1

Answer :6A:70:A0:5E:D0:04

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 2

Which three tasks can be performed using the tabs in XenCenter?


Options are :

  • Manage VMs on shared storage
  • None
  • Back up host configurations and software
  • Recover an unreachable host
  • Enable high available on a pool
  • Remove aXenServer host from a resource pool

Answer :Manage VMs on shared storage Back up host configurations and software Enable high available on a pool

What are two best practices of cleaning up a virtual machine after completing a physical to virtual migration using XenConvert?


Options are :

  • Delete any local user accounts on the machinethat are not in use
  • InstallXenServer Tools
  • Remove and reinstall applications such as antivirus and anti-spyware
  • Remove any hardware related software such as management utilities and unused drivers

Answer :InstallXenServer Tools Remove any hardware related software such as management utilities and unused drivers

An administrator is installing XenServer Enterprise Edition 5.0 in an environment. The administrator has two disks available for storage. According to best practices, how should the administrator configure the local disk storage repositories (SRs) during the initial XenServer installation?


Options are :

  • InstallXenServer on one disk and the virtual machine SR on the other disk
  • InstallXenServer and an in-place upgrade partition on one disk and the control domain on the other disk
  • InstallXenServer on one disk and the control domain on the other disk
  • InstallXenServer and the virtual machine SR on one disk and an in-place upgrade partition on the other disk

Answer :InstallXenServer on one disk and the virtual machine SR on the other disk

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 3

What are two best practices for cleaning up a virtual machine after completing a physical to virtual (P2V) migration using XenConvert?


Options are :

  • Remove any hardware related software such as management utilities and unused drives
  • InstallXenServer tools
  • Remove and reinstall applications such as antivirus and anti-spyware
  • Delete any local user accounts on the machine that are not in use

Answer :Remove any hardware related software such as management utilities and unused drives InstallXenServer tools

An administrator is installing XenServer Enterprise Edition 5.0 in an environment. The administrator has two disks available for storage. According to best practices, how should the administrator configure the local disk storage repositories (SRs) during the initial XenServer installation?


Options are :

  • InstallXenServer and an in-place upgrade partition on one disk and the control domain on the another disk
  • InstallXenServer on one disk and the control domain on the other disk
  • InstallXenServer and the virtual machine SR on one disk and an in-place upgrade partition on the other disk
  • InstallXenServer on one disk and the virtual machine SR on the other disk

Answer :InstallXenServer on one disk and the virtual machine SR on the other disk

What is the purpose of the Local Console?


Options are :

  • Facilitates administration of all aspects ofXenServer
  • Used for the installation process ofXenServer and XenCenter
  • Used to configure all networking and communication between the virtual machines only
  • Creates all new virtual machines, templates and storage repositories only

Answer :Facilitates administration of all aspects ofXenServer

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 4

An administrator is in the process of disabling a XenServer host that is part of a resource pool and migrating its virtual machine to another XenServer host in a pool. What does the administrator need to do to accomplish this?


Options are :

  • Upload an update to each server or pool
  • Run the host-evacuate command
  • Start a support service on theXenServer host
  • Place theXenServer host into Maintenance Mode

Answer :Place theXenServer host into Maintenance Mode

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 1

Which three steps must an administrator take to decide a separate bonded interface to storage traffic?


Options are :

  • Disablemultipathing for all storage traffic
  • Dedicate the IP address to remote storage traffic
  • Assign an IP Address to the interface
  • Direct all storage traffic to the primary management interface
  • Set the interface or NIC bond to Management Mode

Answer :Dedicate the IP address to remote storage traffic Assign an IP Address to the interface Set the interface or NIC bond to Management Mode

Which two steps does an Administrator need to complete in order to disconnect a storage repository (SR) without losing any data?


Options are :

  • Click Detach Storage Repository in the Storage Menu
  • Disconnect from the network all virtual machines that are using the SR
  • Shut down any virtual machines that are using the SR
  • Click forget Storage Repository on the Resources pane shortcut menu

Answer :Click Detach Storage Repository in the Storage Menu Shut down any virtual machines that are using the SR

Which three steps must an administrator take to decide a separate bonded interface to storage traffic?


Options are :

  • Dedicate the IP address to remote storage traffic
  • Direct all storage traffic to the primary management interface
  • Assign an IP Address to the interface
  • Disablemultipathing for all storage traffic
  • Set the interface or NIC bond to Management Mode

Answer :Dedicate the IP address to remote storage traffic Assign an IP Address to the interface Set the interface or NIC bond to Management Mode

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 2

Which three performance data points can an administrator locate for a virtual machine in the performance tab in XenCenter?


Options are :

  • Disk and Network I/O
  • Memory Usage
  • VCPU resources allocated
  • High Availability Status
  • CPU Usage

Answer :Disk and Network I/O Memory Usage CPU Usage

An administrator was unable to add a Xenserver host , XSA to a resource pool. XSA currently has all of its virtual machines shut down, does not have shared storage configured and its system clock is synchronized with the pool master. The administrator also has checked the NIC bond on the management interface and verified the hardware compatability of XSA. What should the administrator do to successfully add XSA to the resource pool?


Options are :

  • Set the NIC to
  • Reboot XSA after synchronizing its system clock with the pool master
  • Remove the network bond on XSA
  • Select to automatically add XSA to the network

Answer :Remove the network bond on XSA

What must an administrator do to allow a resource pool to avoid emergency mode automatically and promote a secondary server to master in the event the master server fails?


Options are :

  • Use thexe pool-emergency-transition-to-master command
  • Enablemultipathing on the master server to all secondary servers
  • Configure high availability for the resource pool
  • Create a Portable Storage Repository

Answer :Configure high availability for the resource pool

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 3

Which step must an administrator take after upgrading XenCenter and the XenServer host software on systems in a pool from XenServer 4.x to 5.0?


Options are :

  • Verify that there are no virtual machines in a suspended state
  • Restart the pool members
  • Resume the pool master
  • Upgrade theXenServer Tools in each virtual machine

Answer :Upgrade theXenServer Tools in each virtual machine

An administrator created a Server status Report of a resource pool containing two servers and is now getting ready to view the resulting packaged zip file. Which two things will be included in this zip file?


Options are :

  • Control domain kernel andinitrd
  • Any problems experienced during data collection
  • XenCenter log files
  • A folder for each server containing the report types selected

Answer :XenCenter log files A folder for each server containing the report types selected

An administrator wants to create a new Virtual Machine on XenServer1, which does not reside in the current resource pool. The administrator wants to keep the configurations exactly the same as those in the resource pool but does not want to manually configure the new VM. How can the administrator create the new VM with the same configurations as those in the resource pool?


Options are :

  • Copy the VM to a shared location to export it to XenServer1
  • Convert the resource pool VM to a template and start it on XenServer1
  • Create a custom template of the resource pool VM and import it to XenServer1 then create a new VM from the template on XenServer1
  • None
  • Make a backup of the desired VM configurations and save it to a shared storage location before exporting it to XenServer1

Answer :Create a custom template of the resource pool VM and import it to XenServer1 then create a new VM from the template on XenServer1

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 4

What is the purpose of the XenServer CLI?


Options are :

  • Creates all new virtual machines, templates and storage repositories only
  • Used to configure all networking and communication between the virtual machines only
  • Used for the installation process ofXenServer and XenCenter
  • Facilitates administrator of all aspects ofXenServer

Answer :Facilitates administrator of all aspects ofXenServer

An administrator created a template with a Microsoft Windows Server 2003 operating system. After creating the template the administrator realized that Microsoft SQL was NOT installed on the virtual machine that was supposed to be the SQL server for the company. What must the administrator do to get Microsoft SQL on to the VM template?


Options are :

  • Install Microsoft SQL on to the existing VM template using a Microsoft SQL CD
  • Create a new template with a Windows 2003 operating system and Microsoft SQL
  • Install Microsoft SQL on to a new VM template using an ISO image
  • Create a new template using the Microsoft SQL template and the Microsoft SQL CD

Answer :Create a new template with a Windows 2003 operating system and Microsoft SQL

Which two steps does an administrator need to complete in order to disconnect a storage repository (SR) without losing any data?


Options are :

  • Click Forget Storage Repository on the Resources pane shortcut menu
  • Shutdown any virtual machines that are using the SR
  • Disconnect from the network all virtual machines that are using the SR
  • Click Detach Storage Repository in the Storage Menu

Answer :Shutdown any virtual machines that are using the SR Click Detach Storage Repository in the Storage Menu

1Y0-201 Managing Citrix XenDesktop 7.6 Solutions Exam Set 1

To allow for rapid deployment of XenServer hosts in a large environment, an administrator decides to install XenServer Enterprise Edition 5.0 using a network boot process. Too which type of server must the administrator configure DHCP to communicate?


Options are :

  • HTTP
  • HTTPS
  • FTP
  • TFTP

Answer :TFTP

An administrator needs to change the HA level for a VM from Restart if possible to protected by using __________ and _________________.


Options are :

  • Xe vm-param-set command
  • XSConsole command
  • The properties tab on the server
  • The HA tab on the VM

Answer :Xe vm-param-set command The HA tab on the VM

After completing an upgrade from version 4.1 to 5.0 for two XenServer hosts in a resource pool, an administrator notices that a suspended virtual machine (VM) is unable to start. What must the administrator do to restart the VM?


Options are :

  • Change the home sever for the VM
  • Perform a Force shutdown and then start the VM
  • Select Resume on and choose aXenServer host
  • Click the resume button to start the VM

Answer :Perform a Force shutdown and then start the VM

1Y0-201 Managing Citrix XenDesktop 7.6 Solutions Exam Set 2

As a best practice, before attempting to add a server to a pool, an administrator should ______.


Options are :

  • Back up any virtual machines hosted on the server
  • Create a new storage repository for the virtual machines hosted on the server
  • Create a copy of the server
  • Enable high availability on the server

Answer :Back up any virtual machines hosted on the server

Which two steps must an administrator take to create a Microsoft Windows Virtual Machine using the XenConvert Physical to Virtual (P2V) conversion tool?


Options are :

  • Reboot the physical machine
  • RunXenConvert on the physical Windows machine
  • Modify device drivers
  • Import the template or image into theXenServer host

Answer :RunXenConvert on the physical Windows machine Import the template or image into theXenServer host

In which three locations could an administrator go within XenCenter to create a new virtual machine?


Options are :

  • Tools Menu
  • New VM button
  • VM Menu
  • Add New Server button
  • Templates Menu

Answer :New VM button VM Menu Templates Menu

1Y0-201 Managing Citrix XenDesktop 7.6 Solutions Exam Set 3

Which storage repository type allows an administrator to create a new storage repository that does not erase any existing data on the specified storage target?


Options are :

  • EXIT
  • NetApp
  • NFS
  • EQUEAL

Answer :NFS

Which two tasks can an administrator perform using the storage tab in XenCenter?


Options are :

  • Create a VM or ISO Storage tag
  • Format an NFS share using NTFS
  • Attach an NFS share to a host or pool
  • Configure a customNetApp storage repository

Answer :Attach an NFS share to a host or pool Configure a customNetApp storage repository

To enable grouping of XenServer hosts into resource pools, live relocation of virtual machines (VMs) and sharing of server resources, an administrator must ____________.


Options are :

  • InstallXenCenter
  • Assign a static IP address only to oneXenServer host
  • Run thexe pool-restore-database command
  • Add shared storage

Answer :Add shared storage

1Y0-201 Managing Citrix XenDesktop 7.6 Solutions Exam Set 4

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions