Citrix 1Y0-731 Netscaler 8.0 Administration Practice Test Set 3

Scenario: An administrator for a network environment with multiple subnets is planning to configure HTTP monitors for services bound to web servers 1 and 2 which are listening on TCP port 80 for HTTP and TCP port 443 for HTTPs. Service1 receives the clear text traffic and Service2 receives the encrypted traffic. Which three parameters could the administrator customize for the custom monitor being bound to Service1?


Options are :

  • Secure
  • Response Timeout
  • Interval
  • Down Time
  • Reverse

Answer : Response Timeout Interval Down Time

Citrix 1Y0-992 Meta Frame Presentation Server Feature Exam Set 1

Which event would trigger a failover in a High Availability pair?


Options are :

  • A monitored interface fails on the primary node.
  • An interface that has monitoring disabled fails on the primary node.
  • The power supply fails on the secondary node.
  • An upgrade of the secondary appliance causes a temporary loss of connectivity.

Answer : A monitored interface fails on the primary node.

In order to content switch browser-based requests based on the domain, which expression should an administrator use?


Options are :

  • REQ. HTTP.URL == http://www.domain.com
  • REQ. HTTP.HEADER Host == www.domain.com
  • REQ.HTTP.URL contains www.domain.com
  • HEADER Host == http://www.domain.com/

Answer : REQ. HTTP.HEADER Host == www.domain.com

A large E. commerce company is planning on integrating NetScaler systems into their network environment. The company requires that the original client IP addresses be recorded in the web server logs. Which two features on the NetScaler could accomplish this?


Options are :

  • RNAT
  • Edge mode
  • USIP
  • USNIP
  • Client IP insertion

Answer : USIP Client IP insertion

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 1

Scenario: A banking company plans to use their NetScaler system to improve their site performance by having it parse traffic to different servers so that users accessing the mortgage page go to one set of servers, users accessing the banking page go to a second set of servers, users applying for a student loan go to a third set of pages and all other traffic goes to the home page. The administrator has already enabled the necessary features and bound the appropriate services to the load balancing virtual servers. In which order could an administrator perform the actions to define a Content Switching virtual server to meet these requirements?


Options are :

  • Add the content switching virtual server, add the default policy, add the other policies, and then bind the load balancing virtual server and policy to the content switching virtual server, and then bind the default load balancing virtual server to the content switching virtual server with the default policy.
  • Add the content switching virtual server, bind the load balancing virtual server to the content switching virtual server, add a policy, bind the policy to the load balancing virtual server, and then bind the default load balancing virtual server to the content switching virtual server without associating a policy.
  • Add the policy, add the default policy, bind the policy to the load balancing virtual server, add the content switching virtual server, bind the load balancing virtual server to the content switching virtual server, and then bind the default load balancing virtual server to the content switching virtual server with the default policy.
  • Add the named expressions, add a policy with the expressions, add the content switching virtual server, bind the load balancing virtual server and policy to the content switching virtual server and then bind the default load balancing virtual server to the content switching virtual server without associating a policy.

Answer : Add the named expressions, add a policy with the expressions, add the content switching virtual server, bind the load balancing virtual server and policy to the content switching virtual server and then bind the default load balancing virtual server to the content switching virtual server without associating a policy.

During the initial testing of a NetScaler system configured with High Availability, the primary node failed over immediately at start up. Which configuration option should the administrator use to resolve the problem?


Options are :

  • Run the "force HA sync" command from the primary node
  • Execute the "disable interface" command for all unused interfaces
  • Enable node monitoring on all primary node interfaces
  • Disable monitoring on all connected interfaces

Answer : Execute the "disable interface" command for all unused interfaces

In which scenario would an administrator require two NetScaler systems configured as a High Availability pair?


Options are :

  • One NetScaler system resides in the DMZ while the second NetScaler system resides in the internal network.
  • A business critical application needs to be load balanced.
  • Two network interface cards on a NetScaler system are being used in fault tolerant mode.
  • Internal access to the intranet is required for an employee expense program.
  • Two firewall devices require configuration in failover mode.

Answer : A business critical application needs to be load balanced.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 2

Which option must an administrator enable on a NetScaler system to route packets that are not destined for the NetScaler?


Options are :

  • L2 mode
  • L3 mode
  • Static route advertisement
  • Dynamic route advertisement

Answer : L3 mode

Scenario: An administrator is configuring monitoring for web servers in the environment that often results in services being marked as DOWN because of slow back-end servers. The administrator wants to configure the virtual server and services so that existing connections stay open when a service is marked down but not when a virtual server is marked DOWN. How must the administrator configure the service and virtual server to reflect this dependency?


Options are :

  • set lb vserver Ibv1 -downStateFlush DISABLED set service svc1 -downStateFlush ENABLED
  • set lb vserver Ibv1 -downStateFlush ENABLED set service svc 1 -downStateFlush DISABLED
  • set lb vserver Ibv1 -downStateFlush ENABLED set service svc1 -downStateFlush ENABLED
  • set lb vserver Ibv1 -downStateFlush DISABLED set service svc1 -downStateFlush DISABLED

Answer : set lb vserver Ibv1 -downStateFlush ENABLED set service svc 1 -downStateFlush DISABLED

The auditing and security policy of a company requires that all transactions that can be logged must be logged. Which option must an administrator configure a syslog server for to meet this requirement?


Options are :

  • HTTP transactions
  • System counters
  • Device counters
  • Audited commands

Answer : Audited commands

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 3

Which address should an administrator set in the add node command on the primary node of a High Availability pair?


Options are :

  • MAC address of the secondary device
  • IP address of the failover NIC on the primary device
  • NSIP address of the secondary device
  • IP address of the failover NIC on the secondary device
  • MIP address of the secondary device

Answer : NSIP address of the secondary device

An administrator is configuring a pair of NetScaler systems for High Availability and needs to ensure that specific interfaces are not monitored. Where in the configuration utility can the administrator ensure this


Options are :

  • The interface sub node in the Network node
  • The root of the System node
  • The interface sub node in the System node
  • The root of the Network node

Answer : The interface sub node in the Network node

An administrator is configuring a pair of NetScaler systems for High Availability and needs to ensure that specific interfaces are not enabled. Where in the configuration utility can the administrator ensure this?


Options are :

  • The Interface sub node in the System node
  • The root of the System node
  • The Interface sub node in the Network node
  • The root of the Network node

Answer : The Interface sub node in the Network node

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 1

Which command should an administrator type in the command line interface to configure the mapped IP address as 10.48.192.12?


Options are :

  • add ns config -ipaddress 10.48.192.12 -subnet mask 255.0.0.0
  • set ns ip -ipaddress 10.48.192.12 -netmask 255.255.255.0 -mip
  • add ns ip 10.48.192.12 255.255.255.0 -typemip
  • set ns config -ipaddress 10.48.192.12

Answer : add ns ip 10.48.192.12 255.255.255.0 -typemip

A company is planning on implementing NetScaler systems in High Availability pairs. Which entry in the NS.CONF file of the secondary system needs to be unique from those of the primary system?


Options are :

  • VMAC
  • Node ID
  • MIP address
  • NSIP address

Answer : NSIP address

An administrator needs to configure load balancing for a web farm so that traffic will not be dropped when the virtual server is marked DOWN. The administrator can configure or ___________ so that it will receive traffic when the virtual server is marked DOWN. (Choose the two options that correctly complete the sentence.)


Options are :

  • the node ID of the secondary in the HA pair
  • another NetScaler system
  • the name of a backup virtual server
  • a redirect URL string

Answer : the name of a backup virtual server a redirect URL string

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 2

How can an administrator configure a DNS monitor so that it will mark the service DOWN if the server does not return an IP address of 192.10.10.7?


Options are :

  • Specify the 192.10.10.7 as the expected IP address and enable the reverse option
  • Specify the query type address record and the appropriate domain name as the query
  • Specify the appropriate domain name as the query and 192.10.10.7 as the expected IP address
  • Specify the query type zone and the appropriate domain name as the query

Answer : Specify the appropriate domain name as the query and 192.10.10.7 as the expected IP address

Scenario: Only one specific logging application requires the client IP address in order to process information correctly in an environment where a NetScaler system is load balancing all the web servers. This application is hosted on one web server in the farm. How must an administrator configure Client IP header insertion appropriately for this scenario?


Options are :

  • as an advanced service option
  • as an advanced vserver option
  • as an advanced server option
  • as a global feature

Answer : as an advanced service option

How must an administrator configure a health check for firewalls that are load balanced by a NetScaler system?


Options are :

  • Increase the interval parameter.
  • Select the reverse parameter.
  • Select the secure parameter.
  • Select the transparent parameter.
  • Increase the response timeout parameter.

Answer : Select the transparent parameter.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 3

With which two types of actions can the expression url == * txt || res.http.header content- encoding == text/html be used?


Options are :

  • Compression
  • Content Switching
  • Cache Redirection
  • Caching

Answer : Compression Caching

Scenario: An administrator is trying to improve site security by using the content filtering feature to terminate a client connection when it detects a possible instance of nimda virus. The administrator has already created a policy expression that will match traffic with ROOT.EXE or CMD. EXE and plans to use the RST action to terminate the appropriate connections. How can the administrator associate the policy expression and action to achieve the desired result?


Options are :

  • Add the filter with the policy expression, then add the action to the filter.
  • Add the filter with the policy expression and the action specified.
  • Configure the action, then add the filter, then add the action and the policy expression to the filter.
  • Configure the action, then add the filter with the policy expression and the action specified.

Answer : Add the filter with the policy expression and the action specified.

Which expression should an administrator use to drop all non GET and non POST requests?


Options are :

  • REQ.HTTP.METHOD != GET && REQ.HTTP.METHOD != POST
  • REQ.HTTP.METHOD != GET || REQ.HTTP.METHOD != POST
  • REQ.HTTP.METHOD == GET && REQ.HTTP.METHOD == POST
  • REQ.HTTP.METHOD == GET || REQ.HTTP.METHOD == POST

Answer : REQ.HTTP.METHOD != GET && REQ.HTTP.METHOD != POST

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 4

Scenario: A company is installing a new application onto their web servers which require a restart. The application must be installed and tested on all 60 servers by the end of the week. The installation team will be working day and night to accomplish this task and cannot guarantee when any one server will be up or down. The network administrator has HTTP-Inline and TCP-ECV monitors bound to services that send traffic to the servers. During the installation and testing period, the administrator wants the services to be considered DOWN the first time the response timeout is reached and the probe time to reflect the time it usually takes to restart a server. Which two parameters does the administrator need to customize on these monitors to achieve this?


Options are :

  • Interval
  • Response Timeout
  • Down Time
  • Retries

Answer : Down Time Retries

Scenario: An administrator wants to improve connection reuse and reduce server consumption for the web servers in the environment. To accomplish this, the administrator plans to configure a service so that the server is ofF. loaded faster from having to serve slow clients. Which advanced service option should the administrator configure to accomplish this?


Options are :

  • TCP Buffering
  • Max Client
  • Max Request
  • Client IP header insertion

Answer : TCP Buffering

Scenario: An administrator is creating services for servers in a farm where the IP addresses do not change rapidly. The administrator plans to use the NetScaler system to forward encrypted traffic to server1, server2, and server3 so that the traffic goes to the back-end web server without decryption. The IP addresses for server1, server2 and server3 are 192.10.10.1-3 and all servers are listening on port 443. The service for encrypted traffic is named "encrypted." The administrator will load balance these servers. How can the administrator create the service through the command line interface for this scenario?


Options are :

  • add service encrypted1 server1 SSL 443 add service encrypted2 server2 SSL 443 add service encrypted3 server3 SSL 443
  • add service encrypted 192.10.10.1-3 SSL 443
  • add service encrypted1 server1 SSL_Bridge 443 add service encrypted2 server2 SSL_Bridge 443 add service encrypted3 server3 SSL_Bridge 443
  • add service encrypted 192.10.10.1-3 SSL_Bridge 443

Answer : add service encrypted1 server1 SSL_Bridge 443 add service encrypted2 server2 SSL_Bridge 443 add service encrypted3 server3 SSL_Bridge 443

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 1

Scenario: A company determined that High Availability is necessary for the reliability of web traffic to their web site. The administrator now needs to configure the NetScaler systems for High Availability Monitoring in onE. arm mode. Must the administrator disable any interfaces, and if so, which interfaces must the administrator disable while configuring HA monitoring?


Options are :

  • No, the HA monitor determines the interfaces that are active.
  • Yes, all system interfaces except for the one connected to the switch.
  • Yes, all system interfaces except for the two connected to the internal and external switches.
  • No, the HA monitor requires all interfaces to be active.

Answer : Yes, all system interfaces except for the one connected to the switch.

How many untagged VLANs can an administrator configure on a single interface?


Options are :

  • 1
  • 16
  • 4096
  • 2
  • 256

Answer : 1

An administrator is configuring a pair of NetScaler systems for High Availability and needs to ensure that a specific active interface is not monitored. Which command can be used to achieve this?


Options are :

  • set interface
  • ha monitor off
  • set node
  • hastatus nomonitor

Answer : set interface

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 2

Scenario: A company that provides online downloads of large files has implemented a NetScaler system to load balance their servers. The administrator is currently configuring monitoring and wants the monitors to accurately reflect the service dependencies in the environment. Which two parameters will the administrator need to configure in order to properly monitor the services for FTP downloads using the default FTP monitor?


Options are :

  • Password
  • Query type
  • Dispatcher IP
  • Custom Header
  • User Name

Answer : Password User Name

An administrator plans to configure a redirect URL for a load balancing virtual server so that requests are sent to the default page of the desired URL. When configuring the URL, which format should the administrator use so that the request is sent to the correct page?


Options are :

  • http://www.citrix.com/%default%
  • http://www.citrix.com
  • http://www.citrix.com/index.html
  • http://www.citrix.com/

Answer : http://www.citrix.com/

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions