Citrix 1Y0-731 Netscaler 8.0 Administration Practice Test Set 1

Which expression should an administrator use to explicitly drop trace and connect methods?


Options are :

  • REQ.HTTP.METHOD == TRACE && REQ.HTTP.METHOD == CONNECT
  • REQ.HTTP.METHOD == TRACE || REQ.HTTP.METHOD == CONNECT (Correct)
  • REQ.HTTP.METHOD != TRACE || REQ.HTTP.METHOD != CONNECT
  • REQ.HTTP.METHOD != TRACE && REQ.HTTP.METHOD != CONNECT

Answer : REQ.HTTP.METHOD == TRACE || REQ.HTTP.METHOD == CONNECT

Citrix 1Y0-614 Access Suite 4.0 Design Practice Exam Set 1

An administrator wants to configure load balancing so that all requests coming from a particular network are sent to the same server. Which load balancing method meets the needs of this environment?


Options are :

  • Destination IP Hash
  • Domain Hash
  • Source IP Hash (Correct)
  • Source IP/Destination IP Hash

Answer : Source IP Hash

An administrator rE. configuring a NetScaler deployment would like to replace an existing mapped IP (MIP) address with a new one. Which command should the administrator use to erase the existing MIP?


Options are :

  • delete -typemip
  • rm ip (Correct)
  • rm ip
  • del ip

Answer : rm ip

What can an administrator configure to perform a health check for a service transferring HTTPS traffic so that a probe is only sent when there is no real traffic to the server?


Options are :

  • An HTTP monitor with the transparent parameter selected
  • An HTTP monitor with the secure parameter selected
  • An HTTP-ECV monitor with the transparent parameter selected
  • An HTTP-Inline monitor with the secure parameter selected (Correct)

Answer : An HTTP-Inline monitor with the secure parameter selected

Citrix 1Y0-350 NetScaler 10 Essentials and Networking Exam Set 3

An administrator wants to configure link load balancing so that all the packets going to a particular network are sent to the same router. Which load balancing method meets the needs of this environment


Options are :

  • Domain Hash
  • Destination IP Hash (Correct)
  • Source IP Hash
  • Source IP/Destination IP Hash

Answer : Destination IP Hash

Which port will an administrator need to open on a network firewall to be able to access the NetScaler configuration utility?


Options are :

  • 3011
  • 3008
  • 3000
  • 3010 (Correct)

Answer : 3010

Scenario: A company with a single subnet is deploying a NetScaler system into its network environment. The NetScaler will be placed in the 192.168.10.34 subnet. The netmask is 255.255.255.224. The administrator has already set up the NSIP address and the mapped IP address using the command line interface. Which command could the administrator use to complete this step in the set up?


Options are :

  • add network route 0.0.0.0 0.0.0.0 192.168.10.63 (Correct)
  • add network route 0.0.0.0 0.0.0.0 192.168.10.30
  • add network route 192.168.10.0 255.255.255.224 192.168.10.30
  • add network route 192.168.10.0 255.255.255.224 192.168.10.63

Answer : add network route 0.0.0.0 0.0.0.0 192.168.10.63

1Y0-309 Citrix Access Gateway 8.0 Enterprise Edition Set 3

An administrator has just enabled caching and wants to make sure that this will positively impact server performance. Which information can the administrator get from the Dashboard to determine whether server performance was positively affected by enabling caching


Options are :

  • Server side request rate increases
  • Client connection count increases
  • Server side request rate decreases (Correct)
  • Client connection count decreases

Answer : Server side request rate decreases

Which two parameters must an administrator set to configure health checks correctly for firewalls that are load balanced by a NetScaler system?


Options are :

  • Select the transparent parameter. (Correct)
  • Provide the IP address for the monitor.
  • Select the reverse parameter.
  • Provide the IP address for a network device residing behind the firewall. (Correct)
  • Select the secure parameter.

Answer : Select the transparent parameter. Provide the IP address for a network device residing behind the firewall.

Scenario: A company is setting up new NetScaler systems in High Availability (HA) mode using inline mode. The administrator has connected four interfaces per box and two pairs per box have inline mode configured. The administrator set up each pair with link aggregation. Which three steps are essential to establishing an HA monitor for the pair?


Options are :

  • Disable all interfaces that are not connected. (Correct)
  • Configure an HA Monitor for the channel interfaces only. (Correct)
  • Ensure that the MIP address is the same for each member in the pair. (Correct)
  • Ensure that the nsroot password and MIP address is different for each member in the pair.
  • Configure an HA Monitor for the physical interfaces only.

Answer : Disable all interfaces that are not connected. Configure an HA Monitor for the channel interfaces only. Ensure that the MIP address is the same for each member in the pair.

Citrix 1Y0-351 NetScaler 10.5 Essentials and Networking Exam Set 9

Scenario: An administrator is evaluating multiple NetScaler system configurations on a High Availability (HA) pair in a test environment. In the current testing phase, the administrator wants to prevent failover on the nodes and avoid the possibility of two primary systems. To meet the requirements of this scenario, the administrator must configure HA by setting the _________________. (Choose the correct phrase to complete the sentence.)


Options are :

  • secondary node to stay secondary (Correct)
  • HA monitor to OFF in the configuration utility
  • HA monitor to DISABLE using the command line interface command
  • primary node to stay primary

Answer : secondary node to stay secondary

What are two paths an administrator could use to correctly set the nsroot password during the initial set up of a NetScaler system?


Options are :

  • The add nsroot password command
  • The passwd command in the command line interface
  • The Setup Wizard to set the new password (Correct)
  • The set system user command in the command line interface (Correct)

Answer : The Setup Wizard to set the new password The set system user command in the command line interface

Scenario: An administrator for a network environment with multiple subnets is planning to configure HTTP monitors for services bound to web servers 1 and 2, which are listening on TCP port 80 for HTTP and TCP port 443 for HTTPs. Service1 receives the clear text traffic and Service2 receives the encrypted traffic. Which parameter does the administrator need to customize for the custom monitor that will be bound to Service2?


Options are :

  • Secure (Correct)
  • Interval
  • Reverse
  • Down Time
  • Response Timeout

Answer : Secure

Citrix 1Y0-731 Netscaler 8.0 Administration Practice Exam Set 3

An SNMP manager attempted to poll for an OID but received the error message: "response timeout." Which two options could the administrator have misconfigured for SNMPv2 to cause this error message?


Options are :

  • SNMP group
  • SNMP community (Correct)
  • SNMP manager (Correct)
  • SNMP user

Answer : SNMP community SNMP manager

An administrator is adding a NetScaler system to an inline configuration to add redundancy to the network. Which setting, if selected on the new node, would enable the new node to maintain configurations already existing on the old node when adding the new NetScaler system to the configuration?


Options are :

  • HA synchronization
  • HA propagation
  • Stay secondary (Correct)
  • Stay primary

Answer : Stay secondary

Scenario: An administrator for a network environment with multiple subnets is planning on configuring health checks for services bound to web servers 1 and 2 which are listening on TCP port 80 for HTTP and TCP port 443 for HTTPs. Service1 receives the clear text traffic and Service2 receives the encrypted traffic. Which type of monitor should the administrator bind to the services to meet the needs of this environment?


Options are :

  • An HTTP monitor to Service1 and an HTTP monitor with the secure parameter selected to Service2. (Correct)
  • A TCP monitor to Service1 and a TCP-ECV monitor with the secure parameter selected to Service2.
  • An HTTP-ECV monitor to Service1 and Service2.
  • A TCP monitor to Service1 and Service2.

Answer : An HTTP monitor to Service1 and an HTTP monitor with the secure parameter selected to Service2.

Citrix 1Y0-731 Netscaler 8.0 Administration Practice Test Set 1

Scenario: An administrator is planning on deploying a NetScaler system into a network environment using SNMP. The administrator plans on enabling the 11 SNMP traps relating to request and response rates. Which two objects must the administrator configure in order for the SNMP traps to send alerts?


Options are :

  • Additional IP addresses on which the SNMP service can respond to SNMP queries
  • Source IP address
  • Threshold levels for the traps (Correct)
  • SNMP destination (Correct)

Answer : Threshold levels for the traps SNMP destination

An administrator is configuring a MYSQL monitor to accurately reflect the database service dependency in a NetScaler deployment. Which two parameters must the administrator specify in the Create Monitor screen of the configuration utility to monitor MYSQL?


Options are :

  • User Name (Correct)
  • Transparent
  • Database (Correct)
  • BaseDN
  • Reverse

Answer : User Name Database

Which two types of IP addresses are most commonly used by the NetScaler system to communicate to the back-end resources?


Options are :

  • Mapped (Correct)
  • NetScaler
  • Virtual server
  • Intranet
  • Subnet (Correct)

Answer : Mapped Subnet

Citrix 1Y0-992 Meta Frame Presentation Server Feature Exam Set 1

What could cause two NetScaler devices to constantly trade primary state in a High Availability pair?


Options are :

  • Management interface flapping
  • Packet being lost on intermediate link carrying the heartbeat (Correct)
  • Synchronization errors
  • Upstream routers becoming unavailable

Answer : Packet being lost on intermediate link carrying the heartbeat

Scenario: A company has distributed Internet sites and installations are spread across multiple network locations and requires load balancing to be based on the client's proximity to the site, with the least amount of configuration. What must the administrator do to ensure GSLB uses the appropriate load balancing method?


Options are :

  • Enable Proximity based Global Server Load Balancing anduse the location's database to enter the MAC address of all the clients and the corresponding site to which they should make the connection.
  • Enable and configure Dynamic Proximity based Global Server Load Balancing. (Correct)
  • Enable Dynamic Network Proximity based on the RTT of the client accessing the load balancing virtual server.
  • Enable DNS view based Static Proximity through anAdvanced expression to extract the client IP and compare it to the subnet of the site.

Answer : Enable and configure Dynamic Proximity based Global Server Load Balancing.

Scenario: An administrator created a policy expression to identify URLs with a cascading style sheets (CSS) suffix. The administrator plans to use the policy expression to prevent URLs with a CSS suffix from being compressed when the HTTP request is received. How can the administrator associate the policy expression and action to achieve the desired result?


Options are :

  • Configure the action, then add the filter with the policy expression and the action specified.
  • Add a filter with the policy expression and the action specified.
  • Configure the action,then add a compression policy with the policy expression and the action specified
  • Add a compression policy with the policy expression and action specified. (Correct)

Answer : Add a compression policy with the policy expression and action specified.

Citrix 1Y0-351 NetScaler 10.5 Essentials and Networking Exam Set 9

Which type of VLAN is used when an administrator leaves the NetScaler system interfaces on the default VLAN?


Options are :

  • Port-based (Correct)
  • MAC. based
  • Tagged
  • Protocol-based

Answer : Port-based

An administrator is configuring a pair of NetScaler systems for High Availability and needs to ensure that all unused interfaces are not enabled. Which command can the administrator use to do this?


Options are :

  • disable interface (Correct)
  • disable interface -u
  • unbind interface -u
  • unbind interface

Answer : disable interface

What does an administrator need to configure in order for a NetScaler system to advertise virtual IP addresses, directly connected routes and static routes on the upstream routers?


Options are :

  • Route Health Injection (Correct)
  • Front-end Health Check
  • Link Load Balancing
  • Static Routes

Answer : Route Health Injection

1Y0-309 Citrix Access Gateway 8.0 Enterprise Edition Set 4

Scenario: A company just implemented a new authentication method using RADIUS. The RADIUS servers are load balanced by a NetScaler system and the administrator needs to make sure that the servers are not only UP but responding correctly to requests. How should the administrator configure a health check using the command line interface to make sure that a RADIUS server is marked as DOWN if it does not respond to the probe with an Access-Accept code three times in a row?


Options are :

  • add monitor radacpt radius -username citrite -password citrix -radkey netscaler- radNASip 10.10.10.5 -radNASid NS9400 -respcode 2 -reverse yes
  • add monitor radacpt radius -username citrite -password citrix -radkey netscaler- radNASip 10.10.10.5 -radNASid NS9400 -respcode 2 -transparent yes
  • add monitor radacpt radius -username citrite -password citrix -radkey netscaler- radNASip 10.10.10.5 -radNASid NS9400 -respcode 2 -reverse no (Correct)
  • add monitor radacpt radius -username citrite -password citrix -radkey netscaler- radNASip 10.10.10.5 -radNASid NS9400 -respcode 2 -transparent no

Answer : add monitor radacpt radius -username citrite -password citrix -radkey netscaler- radNASip 10.10.10.5 -radNASid NS9400 -respcode 2 -reverse no

Which two modes could a NetScaler system be deployed in if all traffic must pass through the NetScaler?


Options are :

  • StanD.alone inline (Correct)
  • StanD. alone onE. arm
  • HA onE. arm
  • HA inline (Correct)

Answer : StanD.alone inline HA inline

An administrator wants to modify a compression policy so that the NetScaler system will compress text globally using the gzip format instead of deflate format. Which command line interface command must the administrator use to modify the existing compression policy correctly?


Options are :

  • bind cmp global
  • add cmp policy
  • set cmp policy (Correct)
  • rm cmp policy

Answer : set cmp policy

Citrix 1Y0-371 Designing Deploying Managing Citrix Exam Set 4

Scenario: An administrator wants to increase the performance of the company web site by using compression policies. He has enabled the load balancing and compression features on the NetScaler. He wants to create a compression policy so that the NetScaler system will compress application/x-javascript globally using the gzip format. Which two command line interface commands must the administrator use to create and associate the policy correctly?


Options are :

  • bind cmp global (Correct)
  • rm cmp policy
  • add cmp policy (Correct)
  • set cmp policy

Answer : bind cmp global add cmp policy

What must an administrator configure the NetScaler log to record in order to know when someone has altered the system configurations?


Options are :

  • Event messages
  • System counters
  • Access logs
  • Audited commands (Correct)

Answer : Audited commands

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions