Citrix 1Y0-731 Netscaler 8.0 Administration Practice Exam Set 2

Scenario: An events ticketing company plans to use the content switching feature of NetScalerto parse traffic so that users purchasing tickets or answering surveys go to group A servers, users accessing images go to either group B or C servers depending on the category and all other traffic goes to group D. All servers are in the same web farm. Which two actions must an administrator perform to correctly define the content switching virtual server so that traffic not going to groups A. C gets directed to group D?


Options are :

  • Bind the appropriate service to a load balancing virtual server for serving content group D.
  • Bind the appropriate load balancing virtual server to the content switching virtual server without a policy.
  • Bind a load balancing virtual server to the appropriate service for the farm.
  • Bind the appropriate load balancing virtual server to the content switching virtual server with the appropriate policy for content group D.

Answer : Bind the appropriate service to a load balancing virtual server for serving content group D. Bind the appropriate load balancing virtual server to the content switching virtual server without a policy.

Citrix 1Y0-731 Netscaler 8.0 Administration Practice Exam Set 3

Scenario: An administrator is configuring monitoring for web servers in the environment that often results in services being marked as DOWN because of slow back-end servers. The administrator wants to configure the virtual server and services so that existing connections stay open when a service is marked down but not when a virtual server is marked DOWN. How must the administrator configure the service and virtual server to reflect this dependency?


Options are :

  • set lb vserver Ibv1 -downStateFlush DISABLED set service svc1 -downStateFlush DISABLED
  • set lb vserver Ibv1 -downStateFlush DISABLED set service svc1 -downStateFlush ENABLED
  • set lb vserver Ibv1 -downStateFlush ENABLED set service svc 1 -downStateFlush DISABLED
  • set lb vserver Ibv1 -downStateFlush ENABLED set service svc1 -downStateFlush ENABLED

Answer : set lb vserver Ibv1 -downStateFlush ENABLED set service svc 1 -downStateFlush DISABLED

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 1

Which address should an administrator set in the add node command on the primary node of a High Availability pair?


Options are :

  • IP address of the failover NIC on the primary device
  • NSIP address of the secondary device
  • IP address of the failover NIC on the secondary device
  • MAC address of the secondary device
  • MIP address of the secondary device

Answer : NSIP address of the secondary device

Scenario: A banking company plans to use their NetScaler system to improve their site performance by having it parse traffic to different servers so that users accessing the mortgage page go to one set of servers, users accessing the banking page go to a second set of servers, users applying for a student loan go to a third set of pages and all other traffic goes to the home page. The administrator has already enabled the necessary features and bound the appropriate services to the load balancing virtual servers. In which order could an administrator perform the actions to define a Content Switching virtual server to meet these requirements?


Options are :

  • Add the named expressions, add a policy with the expressions, add the content switching virtual server, bind the load balancing virtual server and policy to the content switching virtual server and then bind the default load balancing virtual server to the content switching virtual server without associating a policy.
  • Add the policy, add the default policy, bind the policy to the load balancing virtual server, add the content switching virtual server, bind the load balancing virtual server to the content switching virtual server, and then bind the default load balancing virtual server to the content switching virtual server with the default policy.
  • Add the content switching virtual server, bind the load balancing virtual server to the content switching virtual server, add a policy, bind the policy to the load balancing virtual server, and then bind the default load balancing virtual server to the content switching virtual server without associating a policy.
  • Add the content switching virtual server, add the default policy, add the other policies, and then bind the load balancing virtual server and policy to the content switching virtual server, and then bind the default load balancing virtual server to the content switching virtual server with the default policy.

Answer : Add the named expressions, add a policy with the expressions, add the content switching virtual server, bind the load balancing virtual server and policy to the content switching virtual server and then bind the default load balancing virtual server to the content switching virtual server without associating a policy.

Which event would trigger a failover in a High Availability pair?


Options are :

  • The power supply fails on the secondary node.
  • An interface that has monitoring disabled fails on the primary node.
  • An upgrade of the secondary appliance causes a temporary loss of connectivity.
  • A monitored interface fails on the primary node.

Answer : A monitored interface fails on the primary node.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 2

An administrator is configuring a pair of NetScaler systems for High Availability and needs to ensure that specific interfaces are not monitored. Where in the configuration utility can the administrator ensure this


Options are :

  • The root of the Network node
  • The root of the System node
  • The interface sub node in the Network node
  • The interface sub node in the System node

Answer : The interface sub node in the Network node

An administrator is configuring a pair of NetScaler systems for High Availability and needs to ensure that specific interfaces are not enabled. Where in the configuration utility can the administrator ensure this?


Options are :

  • The Interface sub node in the Network node
  • The Interface sub node in the System node
  • The root of the Network node
  • The root of the System node

Answer : The Interface sub node in the Network node

A large E. commerce company is planning on integrating NetScaler systems into their network environment. The company requires that the original client IP addresses be recorded in the web server logs. Which two features on the NetScaler could accomplish this?


Options are :

  • RNAT
  • USIP
  • USNIP
  • Edge mode
  • Client IP insertion

Answer : USIP Client IP insertion

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 3

The auditing and security policy of a company requires that all transactions that can be logged must be logged. Which option must an administrator configure a syslog server for to meet this requirement?


Options are :

  • System counters
  • Device counters
  • Audited commands
  • HTTP transactions

Answer : Audited commands

During the initial testing of a NetScaler system configured with High Availability, the primary node failed over immediately at start up. Which configuration option should the administrator use to resolve the problem?


Options are :

  • Execute the "disable interface" command for all unused interfaces
  • Disable monitoring on all connected interfaces
  • Enable node monitoring on all primary node interfaces
  • Run the "force HA sync" command from the primary node

Answer : Execute the "disable interface" command for all unused interfaces

An administrator is configuring a pair of NetScaler systems for High Availability and needs to ensure that a specific active interface is not monitored. Which command can be used to achieve this?


Options are :

  • set interface
  • ha monitor off
  • set node
  • hastatus nomonitor

Answer : set interface

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 1

Scenario: An administrator wants to improve connection reuse and reduce server consumption for the web servers in the environment. To accomplish this, the administrator plans to configure a service so that the server is ofF. loaded faster from having to serve slow clients. Which advanced service option should the administrator configure to accomplish this?


Options are :

  • Max Client
  • Client IP header insertion
  • Max Request
  • TCP Buffering

Answer : TCP Buffering

Which expression should an administrator use to drop all non GET and non POST requests?


Options are :

  • REQ.HTTP.METHOD != GET && REQ.HTTP.METHOD != POST
  • REQ.HTTP.METHOD == GET && REQ.HTTP.METHOD == POST
  • REQ.HTTP.METHOD == GET || REQ.HTTP.METHOD == POST
  • REQ.HTTP.METHOD != GET || REQ.HTTP.METHOD != POST

Answer : REQ.HTTP.METHOD != GET && REQ.HTTP.METHOD != POST

Which option must an administrator enable on a NetScaler system to route packets that are not destined for the NetScaler?


Options are :

  • Static route advertisement
  • L3 mode
  • Dynamic route advertisement
  • L2 mode

Answer : L3 mode

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 2

Scenario: An administrator for a network environment with multiple subnets is planning to configure HTTP monitors for services bound to web servers 1 and 2 which are listening on TCP port 80 for HTTP and TCP port 443 for HTTPs. Service1 receives the clear text traffic and Service2 receives the encrypted traffic. Which three parameters could the administrator customize for the custom monitor being bound to Service1?


Options are :

  • Down Time
  • Reverse
  • Secure
  • Response Timeout
  • Interval

Answer : Down Time Response Timeout Interval

How can an administrator configure a DNS monitor so that it will mark the service DOWN if the server does not return an IP address of 192.10.10.7?


Options are :

  • Specify the appropriate domain name as the query and 192.10.10.7 as the expected IP address
  • Specify the 192.10.10.7 as the expected IP address and enable the reverse option
  • Specify the query type address record and the appropriate domain name as the query
  • Specify the query type zone and the appropriate domain name as the query

Answer : Specify the appropriate domain name as the query and 192.10.10.7 as the expected IP address

An administrator rE. configuring a NetScaler deployment would like to replace an existing mapped IP (MIP) address with a new one. Which command should the administrator use to erase the existing MIP?


Options are :

  • rm ip
  • rm ip
  • del ip
  • delete -typemip

Answer : rm ip

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 3

Scenario: An administrator is evaluating multiple NetScaler system configurations on a High Availability (HA) pair in a test environment. In the current testing phase, the administrator wants to prevent failover on the nodes and avoid the possibility of two primary systems. To meet the requirements of this scenario, the administrator must configure HA by setting the _________________. (Choose the correct phrase to complete the sentence.)


Options are :

  • HA monitor to DISABLE using the command line interface command
  • secondary node to stay secondary
  • primary node to stay primary
  • HA monitor to OFF in the configuration utility

Answer : secondary node to stay secondary

An administrator is adding a NetScaler system to an inline configuration to add redundancy to the network. Which setting, if selected on the new node, would enable the new node to maintain configurations already existing on the old node when adding the new NetScaler system to the configuration?


Options are :

  • HA synchronization
  • Stay primary
  • Stay secondary
  • HA propagation

Answer : Stay secondary

An administrator wants to modify a compression policy so that the NetScaler system will compress text globally using the gzip format instead of deflate format. Which command line interface command must the administrator use to modify the existing compression policy correctly?


Options are :

  • bind cmp global
  • add cmp policy
  • set cmp policy
  • rm cmp policy

Answer : set cmp policy

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 4

What does an administrator need to configure in order for a NetScaler system to advertise virtual IP addresses, directly connected routes and static routes on the upstream routers?


Options are :

  • Link Load Balancing
  • Front-end Health Check
  • Route Health Injection
  • Static Routes

Answer : Route Health Injection

Which type of VLAN is used when an administrator leaves the NetScaler system interfaces on the default VLAN?


Options are :

  • Tagged
  • MAC. based
  • Protocol-based
  • Port-based

Answer : Port-based

An SNMP manager attempted to poll for an OID but received the error message: "response timeout." Which two options could the administrator have misconfigured for SNMPv2 to cause this error message?


Options are :

  • SNMP group
  • SNMP community
  • SNMP manager
  • SNMP user

Answer : SNMP community SNMP manager

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 1

What could cause two NetScaler devices to constantly trade primary state in a High Availability pair?


Options are :

  • Packet being lost on intermediate link carrying the heartbeat
  • Synchronization errors
  • Management interface flapping
  • Upstream routers becoming unavailable

Answer : Packet being lost on intermediate link carrying the heartbeat

Scenario: An administrator is planning on deploying a NetScaler system into a network environment using SNMP. The administrator plans on enabling the 11 SNMP traps relating to request and response rates. Which two objects must the administrator configure in order for the SNMP traps to send alerts?


Options are :

  • Additional IP addresses on which the SNMP service can respond to SNMP queries
  • Source IP address
  • SNMP destination
  • Threshold levels for the traps

Answer : SNMP destination Threshold levels for the traps

Which two types of IP addresses are most commonly used by the NetScaler system to communicate to the back-end resources?


Options are :

  • Subnet
  • NetScaler
  • Virtual server
  • Intranet
  • Mapped

Answer : Subnet Mapped

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 2

What must an administrator configure the NetScaler log to record in order to know when someone has altered the system configurations?


Options are :

  • Event messages
  • Audited commands
  • Access logs
  • System counters

Answer : Audited commands

Which two modes could a NetScaler system be deployed in if all traffic must pass through the NetScaler?


Options are :

  • StanD.alone inline
  • StanD. alone onE. arm
  • HA inline
  • HA onE. arm

Answer : StanD.alone inline HA inline

Which two parameters must an administrator set to configure health checks correctly for firewalls that are load balanced by a NetScaler system?


Options are :

  • Provide the IP address for the monitor.
  • Select the reverse parameter.
  • Select the secure parameter.
  • Select the transparent parameter.
  • Provide the IP address for a network device residing behind the firewall.

Answer : Select the transparent parameter. Provide the IP address for a network device residing behind the firewall.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 3

Scenario: A company is setting up new NetScaler systems in High Availability (HA) mode using inline mode. The administrator has connected four interfaces per box and two pairs per box have inline mode configured. The administrator set up each pair with link aggregation. Which three steps are essential to establishing an HA monitor for the pair?


Options are :

  • Configure an HA Monitor for the channel interfaces only.
  • Disable all interfaces that are not connected.
  • Configure an HA Monitor for the physical interfaces only.
  • Ensure that the nsroot password and MIP address is different for each member in the pair.
  • Ensure that the MIP address is the same for each member in the pair.

Answer : Configure an HA Monitor for the channel interfaces only. Disable all interfaces that are not connected. Ensure that the MIP address is the same for each member in the pair.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions