Citrix 1Y0-371 Designing Deploying Managing Citrix Exam Set 1

Which PowerShell command does a Citrix Engineer need to run in order to recover a StorageZone Controller configuration backup?


Options are :

  • Join-SfConfig
  • Configure-SfConfig
  • Set-SfConfig
  • Get-SfConfig

Answer : Set-SfConfig

Citrix 1Y0-371 Designing Deploying Managing Citrix Exam Set 2

Scenario: A Citrix Engineer uses the Netscaler XenMobile wizard to configure SSL Offload for a single XenMobile Server and selects the http communication to XenMobile Server under Mobile Application Management (MAM) load balancing settings. After completing the wizard, the engineer runs the Load Balancer for MAM connectivity check, which shows a failure. Which corrective step will the engineer need to take to ensure successful communications between the XenMobile Server and NetScaler?


Options are :

  • Upload the XenMobile Server root certificate to the NetScaler.
  • Add the CITRIX-XDM monitor to the load-balancing virtual server.
  • Add the NetScaler SNIP to the Access-white list on the XenMobile Server.
  • Allow the http service through the XenMobile Server firewall.

Answer : Allow the http service through the XenMobile Server firewall.

Scenario: A company with 20,000 enrolled users recently acquired another company with 7,000 users. All new users also will need access to mobile MDX apps. Each server's specifications include four vCPUs and 16 GB of RAM. What is the minimum amount of XenMobile cluster nodes required to support this environment?


Options are :

  • Three
  • Two
  • One
  • Four

Answer : Three

XenMobile Mail Manager is blocking an ActiveSync device and a local administrator is unsure about the cause of the issue. In which two areas could a Citrix Engineer look to troubleshoot this issue?


Options are :

  • XenMobile Server connectivity check
  • XenMobile Server Device Details state
  • Windows Event logs
  • NetScaler logs
  • XenMobile Mail Manager Monitor

Answer : XenMobile Server Device Details state XenMobile Mail Manager Monitor

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 1

What would cause a subset of iOS users in the same security group to NOT be provisioned to ShareFile?


Options are :

  • Users have NOT logged on to Worx Home.
  • Users have NOT launched the ShareFile app.
  • The administrator has NOT provisioned the user from the User Management Tool.
  • The administrator has NOT enabled the user provisioning setting within the ShareFile settings.

Answer : Users have NOT logged on to Worx Home.

Scenario: After being online for a few weeks, users can no longer access the Worx Store. After investigation, a Citrix Engineer believes there is a problem with authentication at the NetScaler Gateway. Which command could the engineer run on the NetScaler to validate if LDAP authentication is failing?


Options are :

  • cat nskrb.debug
  • show authentication ldapAction
  • cat aaad.debug
  • nsconmsg -d current -g pol_hits

Answer : cat aaad.debug

What must remain consistent between an old and new certificate when renewing an Apple Push Notification service (APNs) certificate?


Options are :

  • Certificate common name
  • Apple ID
  • Certificate request server
  • Private key password

Answer : Apple ID

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 2

What would cause a subset of Android users in the same security group to NOT be provisioned to ShareFile?


Options are :

  • Users have NOT launched the ShareFile application.
  • The administrator has NOT enabled the user provisioning setting within the ShareFile settings.
  • Users have NOT logged on to Worx Home.
  • The administrator has NOT provisioned the user from the User Management Tool.

Answer : Users have NOT launched the ShareFile application.

Scenario: According to corporate policy, corporate data should be removed if a device is jailbroken or rooted and the device should NOT be allowed to re-enroll. A Citrix Engineer is asked to implement the action based on mobile device status to facilitate the company's security compliance. Which action should the engineer take to meet the requirements of the scenario?


Options are :

  • Perform a selective wipe of the device.
  • Revoke the device.
  • Mark the device as out of compliance.
  • Perform a full wipe of the device.

Answer : Revoke the device.

After a successful iOS device enrollment through a NetScaler SSL Offload load balancer, the device was immediately selectively wiped. Which two scenarios could have caused this selective wipe?


Options are :

  • The Apple Push Notification service (APNs) certificate has expired.
  • The port 443 virtual server is re-encrypting back to the XenMobile Server over port 443.
  • The port 8443 virtual server has the XenMobile Devices or Root certificate bound to it.
  • The port 443 virtual server has the XenMobile Devices or Root certificate bound to it.

Answer : The port 443 virtual server is re-encrypting back to the XenMobile Server over port 443. The port 8443 virtual server has the XenMobile Devices or Root certificate bound to it.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 3

Which two steps must a Citrix Engineer take to configure client certificate authentication on a NetScaler Gateway virtual server?


Options are :

  • Set client certificate authentication to mandatory.
  • Set the user name field inside the Authentication profile to SubjectAltName:PrincipalName
  • Enable session reuse.
  • Disable multiplexing.

Answer : Set client certificate authentication to mandatory. Set the user name field inside the Authentication profile to SubjectAltName:PrincipalName

Which three MDX policies would require a re-installation of the applications in order to be refreshed on the device when attempting to troubleshoot a policy-related issue?


Options are :

  • Allowed URLs
  • WorxMail Exchange Server FQDN
  • Enable encryption
  • Network access
  • Export Contacts
  • Security Group

Answer : WorxMail Exchange Server FQDN Enable encryption Security Group

Scenario: Microsoft CA certificate-based authentication is the sole authentication method being used for Mobile Application Management (MAM). A certificate administrator revokes a user's client certificate. After doing so, the user can still access applications in the Worx Store. What could a Citrix Engineer do to make sure that the user will no longer be able to access the Worx Store when their certificate is revoked?


Options are :

  • Set two-factor authentication on the XenMobile Server.
  • Terminate the user's active sessions on the NetScaler Gateway.
  • Configure the certificate revocation list on the XenMobile Server.
  • Configure the certificate revocation list on the NetScaler.

Answer : Configure the certificate revocation list on the NetScaler.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 1

A Citrix Engineer receives an error message while wrapping a public application obtained from the Apple App store. What is a possible cause of the application failing to wrap?


Options are :

  • The engineer does NOT have an Apple Developer Enterprise account.
  • The application is already signed for App Store distribution.
  • The Apple Developer certificate has expired.
  • The engineer does NOT have an Apple Developer account.

Answer : The application is already signed for App Store distribution.

Scenario: A Citrix Engineer is experiencing issues with client certificate authentication to their Microsoft Exchange Server after configuring their Public Key Infrastructure (PKI) settings within the XenMobile Server. The Exchange configuration and certificate are being configured and delivered to the device within an Exchange policy. The engineer is able to see the certificate and Exchange policy being delivered within the XenMobile Console as well as the certificate on the iOS device. Which two sets of logs could the engineer review to determine why authentication is failing?


Options are :

  • Microsoft Exchange IIS logs
  • XenMobile Server Debug log file
  • Worx Home logs
  • NetScaler aaad.debug logs

Answer : Microsoft Exchange IIS logs Worx Home logs

Scenario: A Citrix Engineer has already backed up the XenMobile configuration database. The following is a list, in no particular order, of some of the remaining steps that the engineer must complete to apply a patch to a multi-node, clustered XenMobile Server deployment: 1. Shut down the updated node. 2. Repeat the above steps for each node in the cluster until all nodes have been upgraded. 3. Fail over to secondary node. 4. Update the running node and confirm that the service is running. 5. Start the next node in the cluster. 6. Shut down all but one node. 7. Verify that all nodes are running in the cluster. 8. Update all nodes at the same time. 9. Restore the XenMobile configuration database. Which six steps must the engineer take, and in which order do they need to be completed, to apply a patch to a multi-node, clustered XenMobile Server deployment?


Options are :

  • 7, 6, 3, 4, 9, 2
  • 7, 8, 6, 3, 2, 9
  • 6, 4, 1, 5, 2, 7
  • 6, 8, 7, 1, 3, 9

Answer : 6, 4, 1, 5, 2, 7

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 2

Scenario: A Citrix Engineer is getting ready to deploy a XenMobile pilot environment to several users in the Sales department. The engineer assigned to the project has provided some users with logon instructions and a URL for the NetScaler Gateway. The engineer has configured LDAP for SSO with SAMAccountName. Several users are reporting that they are unable to log on. Which file could the engineer check on the NetScaler to help troubleshoot the issue?


Options are :

  • auth.log
  • newnslog
  • ns.log
  • aaad.debug

Answer : aaad.debug

Which two additional steps must a Citrix Engineer take to complete a XenMobile cluster configuration after adding a secondary node to an existing production cluster?


Options are :

  • Add the new node as an STA to the NetScaler Gateway configuration.
  • Add and bind the load-balancing service to the load-balancing virtual servers.
  • Add the new node as a Delivery Controller within StoreFront.
  • Add the new node to the XenMobile Server database.

Answer : Add the new node as an STA to the NetScaler Gateway configuration. Add and bind the load-balancing service to the load-balancing virtual servers.

Scenario: A Citrix Engineer plans to use XenMobile NetScaler Connector to add ActiveSync filtering to an existing Exchange load-balancing virtual server. The engineer must ensure: - Enrolled devices that are out of compliance with the configured rule-sets are blocked from accessing resources. - Devices that have NOT yet been enrolled should remain unimpacted. Which policy settings should the engineer implement to achieve these requirements?


Options are :

  • Static + XMS: Block Mode
  • Static: Permit Mode
  • Static + XMS: Permit Mode
  • Static: Block Mode

Answer : Static + XMS: Permit Mode

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 3

A Citrix Engineer is preparing to publish a corporate-purchased application to all managed iOS devices. How could the engineer accomplish this task?


Options are :

  • By using Apple Developer Program
  • By using Apple XCode
  • By using Apple Distribution Program
  • By using iOS VPP

Answer : By using iOS VPP

After publishing an Android MDX application, a Citrix Engineer finds that the application only installs on devices running Android OS 4.3 and above, instead of all Android devices. What is the likely cause of this issue?


Options are :

  • The key size of the certificate used to wrap the application is 2048 bits.
  • The certificate used to wrap the application has expired.
  • The key used on the certificate to wrap the application uses a DSA key algorithm.
  • The certificate used to wrap the application uses SHA1 and DSA Signing algorithms.

Answer : The key size of the certificate used to wrap the application is 2048 bits.

What are two scenarios in which a Citrix Engineer must configure Mobile Service Provider (MSP) for XenMobile Mail Manager?


Options are :

  • To control ActiveSync access for unmanaged devices
  • For BES 4 and BES 5 integration
  • For BES 10 integration
  • To query unmanaged ActiveSync devices

Answer : For BES 4 and BES 5 integration To query unmanaged ActiveSync devices

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 4

A Citrix Engineer could configure User Provisioning to ShareFile for use with XenMobile by configuring the __________ or the __________.


Options are :

  • SSO section in the ShareFile website
  • ShareFile User Management Tool
  • ShareFile section in the XenMobile Console
  • location of the ShareFile public app store link

Answer : ShareFile User Management Tool ShareFile section in the XenMobile Console

What are three reasons why a Citrix Engineer would tag a device?


Options are :

  • Dashboard reporting
  • Role-based Access Control
  • Policy deployment
  • Enrollment invitations
  • Application deployment

Answer : Dashboard reporting Policy deployment Application deployment

Which two XenMobile applications could be upgraded by a Citrix Engineer?


Options are :

  • Web and SaaS applications
  • Public app store applications
  • Web link applications
  • Enterprise applications
  • MDX applications

Answer : Enterprise applications MDX applications

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 1

A Citrix Engineer is configuring access to a XenApp/XenDesktop environment. Which file must the engineer define a relative path to within the XenMobile Server Console?


Options are :

  • index.asp
  • default.htm
  • web.config
  • config.xml

Answer : config.xml

Which configurations must a Citrix Engineer make to integrate XenMobile with XenApp/XenDesktop for a customer whose users access their environment from internal and external network locations?


Options are :

  • Add Secure Ticket Authorities (STAs) for the XenApp/XenDesktop environment to the list of STAs on the NetScaler Gateway vServer being used for XenMobile.
  • Add the XenMobile Server to the list of Secure Ticket Authorities (STAs) on StoreFront or Web Interface.
  • Configure the XenMobile Server as a Delivery Controller within the StoreFront or Web Interface configuration.
  • Configure a single NetScaler Gateway for both XenMobile traffic and existing XenApp/XenDesktop traffic.

Answer : Add Secure Ticket Authorities (STAs) for the XenApp/XenDesktop environment to the list of STAs on the NetScaler Gateway vServer being used for XenMobile.

Scenario: A Citrix Engineer wants to configure a NetScaler Gateway with two-factor authentication within a new XenMobile deployment while providing users with the benefits of single sign-on to the existing XenApp and XenDesktop resources. The engineer configured a Public Key Infrastructure (PKI) for other components in the environment already and would like to use the same PKI. Which two types of authentication policies will the engineer need to add to the NetScaler Gateway virtual server?


Options are :

  • Radius
  • Certificate
  • LDAP
  • TACACS

Answer : Certificate LDAP

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 2

Scenario: A Citrix Engineer needs to configure WorxMail MDX policies based on the information below. Environment Information - On-premise Exchange Server: mail.company.local - XenMobile Server FQDN: xms.company.com -NetScaler Gateway FQDN: nsg.company.com How could the engineer configure WorxMail MDX policies to conserve battery life and minimize re-authentication?


Options are :

  • Background Network Services: xms.company.com:443 Background Network Services Gateway: nsg.company.com:443 Network Access Mode: Unrestricted
  • Background Network Services: mail.company.local:443 Background Network Services Gateway: nsg.company.com:443 Network Access Mode: Unrestricted
  • Background Network Services: xms.company.com:443 Background Network Services Gateway: nsg.company.com:443 Network Access Mode: Tunneled to the Internal Network
  • Background Network Services: mail.company.local:443 Background Network Services Gateway: nsg.company.com:443 Network Access Mode: Tunneled to the Internal Network

Answer : Background Network Services: mail.company.local:443 Background Network Services Gateway: nsg.company.com:443 Network Access Mode: Tunneled to the Internal Network

Which two steps could a Citrix Engineer take to tag both corporate-owned and employee- owned devices?


Options are :

  • Use enrollment invitations.
  • Use an automated action.
  • Add the devices to a Delivery Group.
  • Import a provisioning file.

Answer : Use enrollment invitations. Import a provisioning file.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions