Citrix 1Y0-351 NetScaler 10.5 Essentials and Networking Exam Set 7

A NetScaler engineer would like to present different web pages to a user based on the device and browser type from which they are connecting. Which responder policy could assist with this requirement?


Options are :

  • HTTP.REQ.HEADER("User-Agent")
  • HTTP.RES.URL.PATH
  • HTTP.RES.BODY(1024)
  • HTTP.REQ.Host("Host")

Answer : HTTP.REQ.HEADER("User-Agent")

An engineer has configured a DNS virtual server on a NetScaler appliance but the monitors are showing DOWN and DNS resolution is failing. Which of the following should the engineer check?


Options are :

  • That a ADNS_TCP service has been configured on the NetScaler
  • Port 53 between the SNIP address and the DNS servers is allowed
  • That the load balancing feature has been enabled on the NetScaler
  • Port 53 between the VIP address and the DNS servers is allowed
  • Port 53 between the NSIP address and the DNS servers is allowed

Answer : Port 53 between the SNIP address and the DNS servers is allowed

Scenario: A network engineer suspects that there is a duplex mismatch in the network configuration. The NSIP address is 10.10.1.206. How can the administrator verify the configuration in this scenario?


Options are :

  • Run the start nstrace -level 10 command.
  • Run the show IP 10.10.1.206 command.
  • Run the 'netstat -r' command.
  • Check for the interface configuration in the GUI.

Answer : Check for the interface configuration in the GUI.

Citrix 1Y0-351 NetScaler 10.5 Essentials and Networking Exam Set 8

Which step could a network engineer take to prevent brute force logon attacks?


Options are :

  • Enable the AAA Application feature.
  • Enable the Rate Limiting feature.
  • Configure the Cache redirection policies.
  • Configure the Access Gateway policies.

Answer : Enable the Rate Limiting feature.

Scenario: A network engineer needs to generate a certificate on the NetScaler appliance. The environment requires a private key with 4096-bit encryption. To generate a new SSL certificate from a NetScaler Appliance, the engineer must first create __________. (Choose the correct option to complete the sentence.)


Options are :

  • DSA key
  • CSR
  • RSA key
  • Diffie-Hellman key

Answer : RSA key

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 1

Which policy expression must an engineer use to enable compression for javascript files?


Options are :

  • HTTP.REQ.HEADER("Content-Type").CONTAINS("javascript")
  • HTTP.REQ.BODY(0).CONTAINS("javascript")
  • HTTP.RES.BODY(0).CONTAINS("javascript")
  • HTTP.RES.HEADER("Content-Type").CONTAINS("javascript")

Answer : HTTP.RES.HEADER("Content-Type").CONTAINS("javascript")

Which client c the NetScaler may use?


Options are :

  • User-Agent
  • Accept-Encoding
  • Accept
  • Content-Type

Answer : Accept

Scenario: A NetScaler Engineer has the following set in the Global Server Load Balancing (GSLB) configuration: set gslb site SiteB -triggerMonitor MEPDOWN How does this influence the default service monitoring behavior on the remote site?


Options are :

  • The service monitor will take precedence over MEP.
  • The service monitor is invoked only when MEP connectivity has been lost between SiteA and SiteB.
  • The service monitor is invoked only when MEP has marked the service as down for any reason.
  • The state of the GSLB service will always be controlled by MEP.

Answer : The service monitor is invoked only when MEP has marked the service as down for any reason.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 2

Scenario: A NetScaler engineer is adding a new SSL certificate to a NetScaler device. During the process the engineer receives an error message: "Certificate with key size greater than RSA512 or DSA512 bits not supported." The same process has been followed previously on the same model of NetScaler successfully. What is the likely cause of this error?


Options are :

  • The certificate hostname is invalid.
  • The CSR has not been submitted to the certificate authority.
  • The NetScaler has not been licensed correctly.
  • RSA authentication has been added to the VIP.

Answer : The NetScaler has not been licensed correctly.

A network engineer must determine which SSL protocols are enabled on a virtual server named SSL01. Which command could the engineer run to see this information?


Options are :

  • Show ssl vServer SSL01
  • Show server SSL01
  • Show vServer SSL01
  • Show ssl stats

Answer : Show ssl vServer SSL01

A NetScaler Engineer would like to encrypt the LDAP authentication traffic from a NetScaler to the internal LDAP servers. Which type of load-balancing service should the engineer create?


Options are :

  • SSL
  • RADIUS
  • SSL_TCP
  • TCP

Answer : SSL_TCP

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 3

Scenario: A NetScaler Engineer has a high-availability (HA) pair of NetScaler MPX devices (NS1 and NS2) connected on interfaces 0/1, 1/1 and 1/2. NS1 is currently the primary unit. Fail-safe mode is NOT enabled. High-availability monitor is enabled on all the connected interfaces. The engineer sees the following line in the output of his "show node" command from the command-line interface: Interfaces on which heartbeats are not seen: 1/1 1/2 Interfaces causing Partial Failure: None What will happen if the 0/1 interface fails?


Options are :

  • NS1 and NS2 will both fail and become secondary.
  • NS1 will fail and NS2 will become primary.
  • NS2 will fail and NS1 will remain primary.
  • NS1 and NS2 will both become primary.

Answer : NS1 and NS2 will both become primary.

Scenario: An engineer has been given the task of selecting the TCP profile for a NetScaler appliance. The appliance has a 1.5Mbit WAN interface that has considerable and intermittent packet loss. Which TCP profile should the engineer choose to optimize traffic for the WAN interface?


Options are :

  • nstcp_default_tcp_lan
  • nstcp_default_profile
  • nstcp_default_tcp_lnp
  • nstcp_default_tcp_lfp

Answer : nstcp_default_tcp_lnp

Which three command-line interface commands should a NetScaler Engineer execute to configure an authentication virtual server?


Options are :

  • add authentication vserver ssl
  • show authentication vserver
  • bind ssl certkey
  • set authentication vserver -authenticationDomain
  • add ssl certkey

Answer : add authentication vserver ssl bind ssl certkey set authentication vserver -authenticationDomain

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 1

What should a network engineer configure to set high availability for a load balanced virtual server?


Options are :

  • Load balancing policies
  • Session persistence
  • A backup virtual server
  • Load balancing services

Answer : A backup virtual server

A network engineer needs to configure load balancing for secured web traffic that does NOT terminate at the NetScaler device. Which type of session persistence method can the engineer select for this scenario?


Options are :

  • Cookie Insert
  • SRCIPDESTIP
  • Source IP
  • URL Passive

Answer : Source IP

A NetScaler Engineer has created a new monitor using the following command: add lb monitor mon_inline HTTP-INLINE -respCode 200 302 401 -httpRequest "HEAD /" -interval 10 -reverse YES -secure YES This monitor adds an HTTP-INLINE monitor __________. (Choose the correct phrase to complete the sentence.)


Options are :

  • whose success criteria is an HTTP response code of 200,302,401
  • that will probe the Service every 10 seconds over an SSL connection whose success criteria is any HTTP response code OTHER than 200,302,401
  • whose success criteria is any HTTP response code OTHER than 200,302,401
  • that will probe the Service every 10 seconds over an SSL connection whose success criteria is an HTTP response code of 200,302,401

Answer : whose success criteria is any HTTP response code OTHER than 200,302,401

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 2

Which load-balancing method is used in connection mirroring and firewall load balancing?


Options are :

  • Call ID Hash
  • Destination IP Hash
  • Source IP Soure Port Hash
  • URL Hash

Answer : Source IP Soure Port Hash

The Lazy Load action of Front End Optimization (FEO) improves the end-user experience by allowing images to __________. (Choose the correct phrase to complete the sentence.)


Options are :

  • NOT load until a user scrolls the page to the location where they are displayed
  • load from the local browser cache so it does NOT have to fetch them from the origin server
  • load images from the bottom of the page and then upward to the top
  • load faster due to compression

Answer : NOT load until a user scrolls the page to the location where they are displayed

Scenario: An engineer has configured an SSL virtual server and has bound a service group of type HTTP containing several servers. The service group is UP but the virtual server is in a DOWN state. The engineer has verified that the SSL feature is enabled. What should the engineer do to ensure that the virtual server shows as UP?


Options are :

  • Change the service group to type SSL.
  • Add a monitor that checks for HTTP.
  • Bind an SSL certificate to the virtual server.
  • Configure the service group to use port 443.
  • Change the monitor for a larger time out period.

Answer : Bind an SSL certificate to the virtual server.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 3

Which command will allow an engineer to change the NetScaler IP (NSIP) from the command-line interface?


Options are :

  • set ns config -ipaddress 10.100.10.100 -netmask 255.255.255.0
  • add ns ip 10.100.10.100 255.255.255.0 -type SNIP
  • add ns ip 10.100.10.100 255.255.255.0 -type NSIP
  • set ns ip 10.100.10.100 -netmask 255.255.255.0 -mgmtaccess enabled

Answer : set ns config -ipaddress 10.100.10.100 -netmask 255.255.255.0

Which NetScaler IP address must a NetScaler Engineer set for management and general system access purposes?


Options are :

  • USNIP
  • VIP
  • SNIP
  • NSIP

Answer : NSIP

Which built-in TCP profile should a NetScaler Engineer choose to optimize backend server connections, where the servers reside on the same LAN as the appliance?


Options are :

  • nstcp_default_profile
  • nstcp_default_tcp_lnp
  • nstcp_default_tcp_lan
  • nstcp_default_tcp_lfp

Answer : nstcp_default_tcp_lan

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 4

Which two virtual servers could a NetScaler Engineer configure to redirect GET requests to application servers?


Options are :

  • Load balancing
  • Wildcard
  • Content switching
  • Authentication

Answer : Load balancing Content switching

Scenario: An organization has a fair usage policy that limits each customer to a maximum of five active connections in any given second. A NetScaler Engineer is given the task of implementing the requirements to enforce a policy using the Rate Limiting feature on NetScaler. Which commands should the network engineer execute to create a proper selector and limit identifier that fulfills the policy requirement?


Options are :

  • add stream selector API_selector HTTP.REQ.URL add ns limitidentifier limit_req -mode request_rate -limitType smooth -timeslice 1000 -Threshold 5 - selectorName API_selector
  • add stream selector API_selector CLIENT.IP.SRC add ns limitidentifier limit_req -mode request_rate -limitType smooth -timeslice 1000 -Threshold 5 - selectorName API_selector
  • add stream selector API_selector CLIENT.IP.SRC add ns limitIdentifier API_limitidf - threshold 5 -mode CONNECTION -timeslice 1000 - selectorName API_selector
  • add stream selector API_selector CLIENT.IP.SRC add ns limitIdentifier API_limitidf - threshold 5 -mode CONNECTION -timeslice 1000 - selectorName API_selector

Answer : add stream selector API_selector CLIENT.IP.SRC add ns limitIdentifier API_limitidf - threshold 5 -mode CONNECTION -timeslice 1000 - selectorName API_selector

A network engineer needs to configure load balancing for an FTP site. Which type of session persistence method can the engineer select for this scenario?


Options are :

  • Cookie Insert
  • Rule
  • Source IP
  • Custom Server ID

Answer : Source IP

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 1

Which expression must an engineer use to prevent compression of Cascading Style Sheets?


Options are :

  • HTTP.RES.BODY(0).CONTAINS("text/css")
  • HTTP.REQ.BODY(0).CONTAINS("text/css")
  • HTTP.RES.HEADER("Content-Type").CONTAINS("text/css")
  • HTTP.REQ.HEADER("Content-Type").CONTAINS("text/css")

Answer : HTTP.RES.HEADER("Content-Type").CONTAINS("text/css")

Which two options could a NetScaler Engineer configure to ensure that a revoked client certificate CANNOT be used for a client certificate authentication? (


Options are :

  • Certificate Signing Request (CSR)
  • Online Certification Status Protocol (OCSP)
  • Certificate Revocation List (CRL)
  • Server Name Indication (SNI)

Answer : Online Certification Status Protocol (OCSP) Certificate Revocation List (CRL)

Scenario: An engineer is upgrading the NetScaler firmware from version 10.1 to 10.5 and has a high-availability (HA) setup of two NetScaler MPX appliances. What is the best practice process to upgrade this HA pair?


Options are :

  • Upgrade and restart both units at the same time and test on the new build after they both are running.
  • Upgrade and restart both units at the same time and test on the new build after they both are running.
  • Upgrade the secondary unit, do the failover, test on the new build, and then upgrade the primary unit.
  • Disable the secondary unit, upgrade the primary, test the new build and then upgrade the other unit.
  • Upgrade the primary unit, test on the new build, and then upgrade the secondary unit.

Answer : Upgrade the secondary unit, do the failover, test on the new build, and then upgrade the primary unit.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 2

A NetScaler Engineer has installed Command Center, Insight Center, Web Logging and an Integration Pack for System Center. Which tool would be appropriate to see client-side rendering times?


Options are :

  • Web Logging
  • Insight Center
  • Command Center
  • Integration Pack for System Center

Answer : Insight Center

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions