Citrix 1Y0-351 NetScaler 10.5 Essentials and Networking Exam Set 4

In a high-availability (HA) configuration, a NetScaler Engineer notices that the HA Synchronization status shows as failed. What could be causing the HA Synchronization to fail?


Options are :

  • The RPC passwords are incorrect
  • The nsroot passwords are incorrect
  • Port 3003 is being blocked
  • Port 3009 is being blocked

Answer : The RPC passwords are incorrect

Citrix 1Y0-351 NetScaler 10.5 Essentials and Networking Exam Set 5

What is the only input format supported by the NetScaler when using the NetScaler Certificate Import wizard within the configuration utility?


Options are :

  • DER
  • PKCS#12
  • JKS
  • PEM

Answer : PKCS#12

Which two NetScaler command-line interface commands could an engineer execute to change TCP Window Scaling settings on the NetScaler?


Options are :

  • add ns tcpProfile
  • add autoscale profile
  • set ns tcpbufParam
  • unset ns tcpParam
  • set netProfile

Answer : add ns tcpProfile unset ns tcpParam

Which protocol can be monitored by Insight Center?


Options are :

  • FTP
  • HTTP
  • RADIUS
  • RTSP

Answer : HTTP

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 1

Which troubleshooting tool will show policy hits and verify that a policy expression is being invoked?


Options are :

  • nsconmsg
  • nspepi
  • nstrace.sh
  • nsapimgr

Answer : nsconmsg

Scenario: A NetScaler Engineer is troubleshooting a high-availability issue. The engineer needs to determine if the port being used by the high-availability heartbeats is blocked. Which port is used by high-availability heartbeats?


Options are :

  • 3011
  • 3008
  • 3003
  • 3010

Answer : 3003

How could a NetScaler Engineer ensure that a content-switching virtual server is marked as DOWN if all target load-balancing servers show as DOWN?


Options are :

  • Enable State Update
  • Configure a backup virtual server
  • Specify a monitor
  • Specify a route monitor

Answer : Enable State Update

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 2

Scenario: A NetScaler Engineer needs to enable access to a load-balancing virtual server from two customers that belong to different VLANs, VLAN500 and VLAN600. Each customer must access the services and servers specific to their VLAN and should never be able to reach another customer service or servers. Traffic Domain (TD) 1 has been created for VLAN500 and Traffic Domain (TD) 2 for VLAN600. Load-balancing services have also been created for each server on TD1 and TD2. The TD for the virtual server is TD 3 and IP address 172.10.0.30. In order to complete this setup, the engineer should create a load- balancing virtual server with IP 172.10.0.30 on TD 3 and use __________. (Choose the correct option to complete the sentence.)


Options are :

  • TD1 on one virtual server and TD2 on second
  • TD1 and TD2 services on two virtual servers
  • TD2 services as a backup virtual server
  • TD1 and TD2 services on one virtual server

Answer : TD1 on one virtual server and TD2 on second

Scenario: A NetScaler Engineer is using the following policy to forward traffic when performing content switching: add cs action cs1_act -targetVserverExpr “HTTP.REQ.HOSTNAME” add cs policy cs1_switch_policy -rule true -action cs1_act bind cs vserver CS1-VIP -policyName cs1_switch_policy -priority 10 In order to make sure the policy works correctly, the engineer must name the __________ to match the hostname. (Choose the correct option to complete the sentence.)


Options are :

  • content-switching virtual server
  • load-balancing virtual servers
  • load-balancing services
  • load-balancing servers

Answer : load-balancing virtual servers

Which IP address type should be bound to a VLAN in order to isolate traffic to backend services?


Options are :

  • Cluster IP (CLIP)
  • Virtual IP (VIP)
  • NetScaler IP (NSIP)
  • Subnet IP (SNIP)

Answer : Subnet IP (SNIP)

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 3

Which command must an engineer use to run a cluster with less than (n/2+1) number nodes online?


Options are :

  • add cluster instance -quorumType Majority
  • add cluster instance -quorumType None
  • add cluster instance -quorum None
  • add cluster -quorumType Majority

Answer : add cluster instance -quorumType None

Scenario: A NetScaler Engineer has configured a virtual server as follows: set lb vserver web_vserver -redirectURL http://www.external.hosting.com -backupVServer maint_vserver The virtual server web_vserver is marked as DOWN; maint_vserver is marked as UP. The following request is sent to the web_vserver: GET /path/query HTTP/1.1 What would happen to this request?


Options are :

  • Forwarded to the backup server, ignoring the query
  • Forwarded to the backup server, preserving the query
  • Redirected to http://www.external.hosting.com/path/query
  • Redirected to http://www.external.hosting.com

Answer : Forwarded to the backup server, preserving the query

Multiple Subnet IPs (SNIPs) are defined in the same network. A NetScaler Engineer could specify the SNIP to use to communicate with servers on that network by configuring a __________. (Choose the correct option to complete the sentence.)


Options are :

  • policy-based route
  • listen policy
  • traffic domain
  • net profile

Answer : net profile

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 1

Which client header indicates support for the type of compression the NetScaler may use?


Options are :

  • Accept
  • Content-Type
  • User-Agent
  • Accept-Encoding

Answer : Accept-Encoding

Which connection state is included in the Current Server Connections parameter, but not affected by Max Clients?


Options are :

  • Closing
  • Open Established
  • Listen
  • Open

Answer : Closing

A NetScaler Engineer created an HTTP service and did NOT bind any monitors to the service. Which monitor will the NetScaler automatically bind to the HTTP service?


Options are :

  • tcp-default
  • tcp
  • http-ecv
  • http
  • ping-default
  • tcp-ecv

Answer : tcp-default

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 2

Scenario: The marketing department would like a short URL to use for a product launch that will redirect users to the product information page on the company’s website. The marketing URL they require is http://www.turboappliances.com/prima. It should redirect the user to http://www.turboappliances.com/products/solutions/primaversion1234.html. Which NetScaler command should a NetScaler Engineer run in order to meet the requirements of the scenario?


Options are :

  • dd transform action MarketingURL2 -priority 100 -reqUrlFrom www.turboappliances.com/ - reqUrlInto "http://www.turboappliances.com/products/solutions/primaversion1234.htm
  • add rewrite action MarketingURL1 insert_http_header Location "\"http://www.turboappliances.com/products/solutions/primaversion1234.html\""
  • add responder action MarketingURL redirect "\"http://www.turboappliances.com/products/solutions/primaversion1234.html\""
  • add rewrite action MarketingURL4 replace_http_res "\"http://www.turboappliances.com/products/solutions/primaversion1234.html\""

Answer : add responder action MarketingURL redirect "\"http://www.turboappliances.com/products/solutions/primaversion1234.html\""

Scenario: A Network Engineer needs to provide a solution for mobile users who use devices that do NOT support basic access authentication. Which three steps should be included as part of the engineer's plan to implement this requirement using NetScaler?


Options are :

  • Configure a Pre-Authentication policy.
  • Create an authentication VServer.
  • Create an LDAP authentication policy and bind it to the authentication server.
  • Enable and configure the authentication option on a VServer to use 401-based authentication.
  • Enable and configure the Authentication option on a load balancing VServer to use form- based authentication.
  • Configure an OCSP responder.

Answer : Create an authentication VServer. Create an LDAP authentication policy and bind it to the authentication server. Enable and configure the Authentication option on a load balancing VServer to use form- based authentication.

What is the key benefit to enabling Session Reuse on an SSL offload VServer?


Options are :

  • Reusing existing sessions decreases the number of TCP connections made to backend services.
  • The number of HTTP requests to the backend services are decreased.
  • Resumed SSL sessions are more secure than sessions that require renegotiation.
  • A partial SSL handshake is sent over the existing SSL connection, reducing CPU and bandwidth usage.

Answer : A partial SSL handshake is sent over the existing SSL connection, reducing CPU and bandwidth usage.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 3

When would it be necessary to configure Failover Interface Set (FIS) in an environment that has two NetScaler appliances in high availability (HA) mode?


Options are :

  • The NetScaler appliances are configured on different networks.
  • Route monitors are required.
  • Link redundancy is required.
  • HA monitor is disabled in some interfaces.

Answer : Link redundancy is required.

While binding a certificate key pair where the key is a 2048-bit, a NetScaler Engineer receives the following error message: "Certificate with key size greater than RSA512 or DSA512 bits not supported" What could be causing this error?


Options are :

  • The license file is saved in UTF-8 format.
  • The NetScaler does NOT have an SSL offloading card.
  • The NetScaler appliance does NOT have an appropriate license.
  • The certificate being used is invalid.

Answer : The NetScaler appliance does NOT have an appropriate license.

Which SSL parameter should an engineer configure to bind multiple certificate key pairs to a virtual server?


Options are :

  • Session reuse
  • Client authentication
  • Send close-notify
  • SNI enable

Answer : SNI enable

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 4

Which command must a NetScaler Engineer run at the command-line interface to enable a Link Aggregation Control Protocol (LACP) channel?


Options are :

  • Use "set interface" with lacpPriority parameter.
  • Use "set lacp" with sysPriority parameter.
  • Use "set interface" with lacpKey parameter.
  • Use "set lacp" with ownerNode parameter.

Answer : Use "set interface" with lacpKey parameter.

Which NetScaler caching type requires proxy configuration on all client devices?


Options are :

  • FORWARD
  • SOCKS
  • REVERSE
  • TRANSPARENT

Answer : FORWARD

Which item needs to be configured to enable content prefetch in Integrated Caching on the NetScaler appliance?


Options are :

  • Cache Content Group
  • Cache Selector
  • Cache Object
  • Cache Policy

Answer : Cache Content Group

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 1

Which persistence method is only applicable to load-balancing SIP?


Options are :

  • CALLID
  • RTSPID
  • SOURCEIP
  • COOKIEINSERT

Answer : CALLID

When using static proximity load-balancing method for a Global Server Load Balancing (GSLB) virtual server, there must be a match between the IP addresses in the custom/static database to the IP address of the _________ so that it is associated with a given location. (Choose the correct option to complete the sentence.)


Options are :

  • GSLB service
  • Client local DNS (LDNS)
  • Load-balancing server
  • ADNS service

Answer : GSLB service

What are two benefits of using Link Aggregation Control Protocol (LACP)?


Options are :

  • Redundancy
  • Automatic configuration of TCP windows
  • Compression
  • Reduce TCP latency
  • Increased throughput

Answer : Redundancy Increased throughput

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 2

Which two are HTTP response codes from a successful cache hit by default?


Options are :

  • 401
  • 304
  • 500
  • 200

Answer : 304 200

Which protocol is responsible for exchanging site metric, network metric, and persistence information between sites using Global Server Load Balancing (GSLB)?


Options are :

  • NITRO
  • MEP
  • SSH
  • RPC

Answer : MEP

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions