Citrix 1Y0-351 NetScaler 10.5 Essentials and Networking Exam Set 10

A network engineer wants to collect performance statistics regarding the traffic between different points in the connection, specifically from client-to-NetScaler and from NetScaler to back-end server, and be able to present this to different analysis tools. Which feature on the NetScaler could the engineer use for this?


Options are :

  • Syslog
  • nsconmsg
  • AppFlow
  • nstrace

Answer : AppFlow

Citrix 1Y0-351 NetScaler 10.5 Essentials and Networking Exam Set 2

A network engineer needs to prevent too many simultaneous HTTP requests that can cause a Denial Of Service (DDoS). What could the engineer enable to prevent too many simultaneous HTTP requests?


Options are :

  • Rate Limiting
  • Authorization Policy
  • SureConnect
  • Priority Queuing

Answer : Rate Limiting

Scenario: A network engineer has bound four policies to a virtual server as follows:- PolicyA has a priority of 10- PolicyB has a priority of 20 - PolicyC has a priority of 30 - PolicyD has a priority of 0 Which policy will be evaluated first?


Options are :

  • PolicyD
  • PolicyA
  • PolicyC
  • PolicyB

Answer : PolicyD

Which two virtual server types could have a compression policy bound to them?


Options are :

  • SSL
  • HTTP
  • DNS
  • SSL_TCP

Answer : SSL HTTP

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 1

A network engineer has enabled BGP routing. Which two additional features should the network engineer enable for BGP routing to function?


Options are :

  • MAC based forwarding
  • Layer 3 mode
  • Dynamic routing
  • Layer 2 mode

Answer : Layer 3 mode Dynamic routing

Scenario: An application that uses HTTP for connections and other protocols for different types of content has been deployed. Load balancing virtual servers have been created for each protocol and the engineer now needs to ensure that once a load balancing decision has occurred, further requests for different content are served from the same server. How could the engineer achieve this?


Options are :

  • Add a new virtual server for each protocol that is not directly addressable.
  • Set the Spillover method to DYNAMICCONNECTION.
  • Set each virtual server to use Source IP Hash as the load balancing method.
  • Create a persistency group.

Answer : Create a persistency group.

While performing some re-cabling, a NetScaler engineer noticed that a power supply unit failed on a NetScaler appliance. What should the engineer enable to receive notification of a future hardware failure?


Options are :

  • Health monitoring
  • EdgeSight monitoring
  • SNMP
  • SMTP

Answer : SNMP

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 2

Scenario: A network engineer has created an SSL offload virtual server. The virtual server shows as a DOWN state. Which two scenarios could cause the virtual server showing as DOWN?


Options are :

  • Persistence is set to NONE.
  • A responder policy has been bound.
  • No SSL certificate is bound to the virtual server.
  • The service is not bound to the virtual server.
  • The protocol should be SSL_TCP.

Answer : No SSL certificate is bound to the virtual server. The service is not bound to the virtual server.

A company has a new CEO and wants to update their website with the new CEO's name. What could the engineer do on the website while this modification is being made?


Options are :

  • Insert the new name on the header requests using Rewrite policies.
  • Replace the current name on the body response using Rewrite policies.
  • Delete the current name on the body response using Rewrite policies.
  • Hide the current name on the header request using Rewrite policies.

Answer : Replace the current name on the body response using Rewrite policies.

Scenario: A NetScaler engineer has received an SSL certificate and bound it to the vServer.However, users are unable to browse to the website using HTTPS. When the NetScalerengineer browses to the site using HTTPS, the engineer notices that the certificate chain isincomplete. Which two steps should the administrator take to fix the virtual server?


Options are :

  • Install the Intermediate Certificate from the CA.
  • Install a new Certificate Authority (CA).
  • Link the SSL Certificate to the Intermediate Certificate.
  • Link the Intermediate Certificate to the virtual server.
  • Generate a new CSR.

Answer : Install the Intermediate Certificate from the CA. Link the SSL Certificate to the Intermediate Certificate.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 3

A network engineer is testing a new load balancing virtual server "test" that has the service group "test-grp" bound to it. Which command could the engineer run to show connection details for the new virtual server?


Options are :

  • show servicegroups
  • show connectiontable
  • show services
  • show server

Answer : show connectiontable

A NetScaler implementation is experiencing intermittent network issues, specifically regarding traffic to a back-end service associated with IP address 10.10.1.86. Which command should a network engineer execute to generate diagnostic information to investigate this issue?


Options are :

  • show run | grep 10.10.1.86
  • nstcpdump.sh host 10.10.1.86
  • traceroute 10.10.1.86
  • show service 10.10.1.86 -summary

Answer : nstcpdump.sh host 10.10.1.86

A network engineer wants to hide the IP address of the outgoing packets by changing it to the IP of the VIP.Which feature should the administrator use?


Options are :

  • ACL
  • RNAT
  • PBR
  • Rewrite

Answer : RNAT

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 1

A network engineer needs to configure Citrix NetScaler to provide Access Gateway services to VLAN 2 using interface 1/1 only, while also using interface 1/2 to provide load balancing services to VLAN 3. How could this result be achieved?


Options are :

  • Disable static route advertisement.
  • Configure policy-based routing using the Interface option as a filter.
  • Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1/1 Bind VLAN 3 to Interface 1/2
  • Enable Layer 3 mode Create a Channel Interface using Interface 1/1 and 1/2 Create 2 VMACs Bind a VMAC to interface 1/1 and 1/2

Answer : Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1/1 Bind VLAN 3 to Interface 1/2

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions