1Y0-401 Designing Citrix XenDesktop 7.6 Solutions Exam Set 2

Scenario: Every XenServer hypervisor host is configured in four 10GB network cards - two dedicated storage and two glued to the guest VM, and management VLANs separated. CIO calls the network traffic to be distributed to maximize the use of all the links in each link. All switches support 802.3ad and adaptive load balancing. How to architect to determine the guest VM network?


Options are :

  • Using the active passive bonding
  • Using the LACP bonding
  • None
  • Using an active-active bonding
  • Using MPIO XenSever layoffs

Answer : Using the LACP bonding

1Y0-401 Designing Citrix XenDesktop 7.6 Solutions Exam Set 3

Scenario: CGE security administrator determines that only the Gateway services can be located in the DMZ, and that all Storefront traffic is load balanced. The network administrator requires a flexible solution. How to architect the use of six NetScaler devices in each regional data center?


Options are :

  • NetScaler to create three virtual servers configured subnets in three places, and tie them to redirect the specified ICA Proxy mode StoreFront server.
  • Enable NetScaler appliance in each regional data center internal network gateway traffic, and one in each data center s DMZ load balancing.
  • Create six NetScaler virtual servers for high availability pairs configured subnets in three places, and tie them to redirect the specified ICA Proxy mode StoreFront server.
  • None
  • Enable NetScaler device for each data center internal network load balancing NetScaler device and each data center's DMZ Gateway traffic.

Answer : Enable NetScaler appliance in each regional data center internal network gateway traffic, and one in each data center s DMZ load balancing.

Why use four NetScaler appliances - two primary and two secondary data center NetScaler two virtual servers for each device, each is binded redirection policy is the best remote access design?


Options are :

  • the expected expansion of the use of remote access and provides SSL VPN functionality to meet the needs of the future.
  • None
  • It provides redundancy at the same time optimizing the external WAN traffic.
  • It segments Gateway and load-balancing features of NetScaler appliances.
  • It allows end-users to connect their primary data center through a secure, reliable and cost-effective solution.

Answer : It provides redundancy at the same time optimizing the external WAN traffic.

Why choose an architect active passive bonding configuring network interfaces tied to customers VM networks?


Options are :

  • It uses a round robin load balancing policy, which gives a better distribution of traffic over the interfaces of the bonds.
  • It provides load balancing VM traffic to a plurality of physical NIC interfaces per guest basis and offers improved traffic distribution of the physical interfaces in the bond.
  • It sends all the guest VM traffic stakeholders active interface, which provides the best distribution of load on the network.
  • None
  • It uses a hashing algorithm that provides better distribution of traffic over the interfaces is a bond.

Answer : It provides load balancing VM traffic to a plurality of physical NIC interfaces per guest basis and offers improved traffic distribution of the physical interfaces in the bond.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 1

Scenario: Every XenServer host is configured with two network cards tied to 10GB storage, management, and guest VM networking. CIO calls the network traffic to be distributed to maximize the use of all the links in each link. All switches support 802.3ad and load adaptive balancing.How architect should configure XenServer?


Options are :

  • Using the active passive bonding
  • Using an active-active bonding
  • Using MPIO XenSever layoffs
  • None
  • Using the LACP bonding

Answer : Using MPIO XenSever layoffs

Scenario: CGE need to define the management process image to the desktop publications. Some groups require version control method, which includes a thorough testing before production. Why Windows Deployment Services and the cost of the standard base image of virtual desktops to help manage the versioning process photo?


Options are :

  • It automatically deploy the latest drivers and patches.
  • It takes advantage of Hyper-V snapshots.
  • It automates the deployment of current and old version of the operating system.
  • None
  • It enables quick unloading.

Answer : It takes advantage of Hyper-V snapshots.

Why take one of the farm one configured site, where there are two deployment services for servers your primary data center, two in a secondary data center, and one of the remaining data center, meet the regional, single image management strategy with a small WAN traffic across data centers?


Options are :

  • It will ensure that the introduction of services targets will not load balance between hosts, and between regions to ensure high availability.
  • It reduces the administrative, to ensure that the introduction of services targets will not load balance between the different regions, and between regions to ensure high availability.
  • It reduces the administrative, to ensure that the introduction of services targets will not load balance between the different areas, and ensures high availability in each area.
  • It will ensure that the introduction of services targets will not load balance between hosts, and ensures high availability in each area.
  • None

Answer : It reduces the administrative, to ensure that the introduction of services targets will not load balance between the different areas, and ensures high availability in each area.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 2

Why take one of the farm defined by three sites, two of deployment services for servers in each data center, meet the regional, single image management strategy with a small WAN traffic across data centers?


Options are :

  • None
  • It will ensure that the introduction of services targets will not load balance across regions, ensures high availability in each region, and reduce administrative costs.
  • It will ensure that the introduction of services targets will not load balance between the different areas, and reduce administrative costs.
  • It will ensure that the introduction of services targets will not load balance between hosts, and ensures high availability in each area.
  • It will ensure that the introduction of services targets will not load balance between hosts, and between regions to ensure high availability.

Answer : It will ensure that the introduction of services targets will not load balance between the different areas, and reduce administrative costs.

Why is deploying two NetScaler appliances - one primary and one secondary data center, configured GSLB, the best design solution?


Options are :

  • It provides redundancy at the same time optimizing the external WAN traffic.
  • It segments Gateway and load-balancing features of NetScaler appliances.
  • None
  • It allows for the expected expansion of the use of remote access and provides a future SSL VPN functionality needs.
  • It allows end-users to connect their primary data center through a secure, reliable and cost-effective solution.

Answer : It allows end-users to connect their primary data center through a secure, reliable and cost-effective solution.

Why take one farm in three specified sites, one Deployment Services server in each data center, meet the regional, single image management strategy with a small WAN traffic across data centers?


Options are :

  • It will ensure that the introduction of services targets will not load balance between hosts and ensure high availability in each area.
  • It will ensure that the introduction of services targets will not load balance between hosts and between regions to ensure high availability.
  • It will ensure that the introduction of services targets will not load balance across regions, ensures high availability in each region, and reduce administrative costs.
  • It will ensure that the introduction of services targets will not load balance between the different areas, and reduce administrative costs.
  • None

Answer : It will ensure that the introduction of services targets will not load balance between hosts and ensure high availability in each area.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 3

Scenario: CGE CIO asks Citrix Architect to design a hypervisor network solution. Storage architect team announces that they bought a new 10GB iSCSI SAN that XenServer hosts that use the SAN for storage. They would like a solution to fulfill all the requirements. What should an architect to recommend?


Options are :

  • Each XenServer host is configured in four 10GB network cards - two bonded storage and management, to distinguish a separate VLAN, and two glued to the guest VM networks.
  • Each XenServer host is configured to 10GB four NICs - two dedicated storage, and the two bonded guest VM management separated by VLANs.
  • Each XenServer host must be configured with six 10GB network interfaces - four dedicated for storage traffic, one for management traffic, and the second guest virtual machine (VM) network traffic.
  • Each XenServer host must be configured with two network cards tied to 10GB storage, management, and guest VM networking.
  • None

Answer : Each XenServer host is configured to 10GB four NICs - two dedicated storage, and the two bonded guest VM management separated by VLANs.

Why choose Active-Active architect bonding network interfaces when configuring guest VMs networks?


Options are :

  • It uses a round robin load balancing policy, which gives a better distribution of traffic over the interfaces of the bonds.
  • It sends all the guest VM traffic stakeholders active interface, which provides the best distribution of load on the network.
  • It uses a hashing algorithm that provides better distribution of traffic over the interfaces is a bond.
  • It provides load balancing VM traffic to a plurality of physical NIC interfaces per guest basis and offers improved traffic distribution of the physical interfaces in the bond.
  • None

Answer : It uses a hashing algorithm that provides better distribution of traffic over the interfaces is a bond.

How many Deployment Services servers should be configured architect to install each of the three sites?


Options are :

  • One server in each data center
  • None
  • Two servers in each data center
  • Three servers in each data center
  • wo primary data center servers, two servers in a secondary data center, and one of the remaining data center server

Answer : wo primary data center servers, two servers in a secondary data center, and one of the remaining data center server

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 1

Why choose an architect XenServer MPIO configuring network interfaces tied to customers VM networks?


Options are :

  • None
  • It uses a hashing algorithm that provides better distribution of traffic over the interfaces is a bond.
  • It uses a round robin load balancing policy, which gives a better distribution of traffic over the interfaces of the bonds.
  • It sends all the guest VM traffic stakeholders active interface, which provides the best distribution of load on the network.
  • It provides load balancing VM traffic to a plurality of physical NIC interfaces per guest basis and offers improved traffic distribution of the physical interfaces in the bond.

Answer : It uses a hashing algorithm that provides better distribution of traffic over the interfaces is a bond.

How to configure virtual servers architect NetScaler to four devices?


Options are :

  • Create a single NetScaler virtual server for each device and each device redirection policy to tie the NetScaler virtual server is configured ICA redirection mode StoreFront server.
  • Create four NetScaler virtual servers for each device, and to tie the session policy for those who have been determined ICA redirection mode StoreFront server.
  • None
  • Create a single NetScaler virtual server for each device, and tie each piece of equipment is a session policy NetScaler virtual server configured ICA Proxy mode StoreFront server.
  • NetScaler to create two virtual servers for each device, and bind redirection policy to those who have been determined ICA redirection mode StoreFront server.

Answer : Create a single NetScaler virtual server for each device, and tie each piece of equipment is a session policy NetScaler virtual server configured ICA Proxy mode StoreFront server.

Why choose an architect active passive bonding configuring network interfaces tied to customers VM networks?


Options are :

  • It uses a round robin load balancing policy, which gives a better distribution of traffic over the interfaces of the bonds.
  • It sends all the guest VM traffic stakeholders active interface, which provides the best distribution of load on the network.
  • It uses a hashing algorithm that provides better distribution of traffic over the interfaces is a bond.
  • It provides load balancing VM traffic to a plurality of physical NIC interfaces per guest basis and offers improved traffic distribution of the physical interfaces in the bond.
  • None

Answer : It sends all the guest VM traffic stakeholders active interface, which provides the best distribution of load on the network.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 2

Why create three virtual servers NetScaler configured subnets in three places and binded redirection of policy design the best solution?


Options are :

  • It allows for the expected expansion of the use of remote access and provides functionality for future requirements.
  • It provides redundancy in case of failures while optimizing a site external WAN traffic.
  • It offers intrasite redundancy in case of failures of the device, at the same time improve the performance of an active / active configuration.
  • It protects the WAN failures and connect end-users with a home data center.
  • None

Answer : It protects the WAN failures and connect end-users with a home data center.

Why choose an architect XenServer MPIO configuring network interfaces for storage networks?


Options are :

  • It provides load balancing VM traffic to a plurality of physical NIC interfaces per guest basis and offers improved traffic distribution of the physical interfaces in the bond.
  • It uses a round robin load balancing policy, which gives a better distribution of traffic over the interfaces of the bonds.
  • None
  • It sends all the guest VM traffic stakeholders active interface, which provides the best distribution of load on the network.
  • It uses a hashing algorithm that provides better distribution of traffic over the interfaces is a bond.

Answer : It uses a hashing algorithm that provides better distribution of traffic over the interfaces is a bond.

Why choose an architect LACP bonding configuring network interfaces for storage networks?


Options are :

  • None
  • It uses a hashing algorithm that provides better distribution of traffic over the interfaces is a bond.
  • It uses a round robin load balancing policy, which gives a better distribution of traffic over the interfaces of the bonds.
  • It provides load balancing VM traffic to a plurality of physical NIC interfaces per guest basis and offers improved traffic distribution of the physical interfaces in the bond.
  • It sends all the guest VM traffic stakeholders active interface, which provides the best distribution of load on the network.

Answer : It uses a round robin load balancing policy, which gives a better distribution of traffic over the interfaces of the bonds.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 3

Scenario: CGE need to define the management process image to the desktop publications. Some groups require version control method, which includes a thorough testing before production. Why Windows Deployment Services and centralize trade volume activation help to control the image versioning process?


Options are :

  • It reduces the licensing regime.
  • It automates the license charge.
  • It enables the use of Multiple Activation Keys (max).
  • It helps to manage version control.
  • None

Answer : It enables the use of Multiple Activation Keys (max).

Citrix Architect is planning a multi-server deployment services solution CGE. The solution must be highly available and to minimize the vdisk inconsistency. Why implementing a RAID 0 meet?


Options are :

  • It gives the best possible performance.
  • It provides fault tolerance.
  • None
  • It offers the use of a minimal disk.
  • It provides striping.

Answer : It provides striping.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 4

Scenario: Citrix Architect is planning a multi-server deployment services solution CGE. The solution must be highly available and to minimize the vdisk inconsistency. Why implement fast local storage deduplication meet?


Options are :

  • It gives the best possible performance.
  • It provides fault tolerance.
  • It offers the use of a minimal disk.
  • It provides striping.
  • None

Answer : It gives the best possible performance.

Scenario: Citrix Architect is planning a multi-server deployment services solution CGE. The solution must be highly available and to minimize the vdisk inconsistency. Why is the implementation of RAID 10 meet?


Options are :

  • It minimizes disk space and provides fault tolerance.
  • It offers the highest performance and fault tolerance.
  • None
  • It provides the tracks and the best possible performance.
  • It minimizes disk space and to give the best possible performance.

Answer : It offers the highest performance and fault tolerance.

Scenario: CGE decided to virtualize their server workloads and provides a virtual solution for all of its end users. CGE is looking for an image management process that is scalable, but would like to restrict the infrastructure requirements. Why commissioning services the best image management application method in this environment?


Options are :

  • None
  • It reduces network traffic.
  • It reduces infrastructure Server requirements.
  • It provides a centralized image management.
  • It reduces the storage footprint.

Answer : It provides a centralized image management.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 1

Scenario: CGE to buy a small energy, which is running MGMT, its own 16-bit application. Citrix Architect is responsible for the use of this application Executives / Management end-user group. CIO mandates that FlexCast model must be selected that is similar to this current delivery strategy for the end-user group. It is important that the single-image deployment has been utilized and that management efforts for a minimum update. Availability rapid dismantling of the plan is also available as upgrades because it can often result in system instability. Why use such as MGMT Hosted VDI Static best solution?


Options are :

  • None
  • It allows managers / management end-user group accounts for desktops.
  • It allows the installation of custom applications.
  • It meets the high-performance application requirements Executives / Management end-user groups.
  • It is easy to manage.

Answer : It allows managers / management end-user group accounts for desktops.

Scenario: CGE decided to virtualize their server workloads and provides a virtual solution for all of its end users. CGE is looking for an image management process that is scalable, but would like to restrict the infrastructure requirements. Which image management method should be Architect Citrix recommend the use of a server operating machines and desktop operating system machines?


Options are :

  • None
  • deployment services
  • Windows Deployment Services
  • Machine Creation Services
  • XenServer Fast Clone

Answer : Machine Creation Services

Scenario: Citrix Architect is planning a multi-server deployment services solution CGE. The solution must be highly available and to minimize the vdisk inconsistency. Why is the implementation of RAID 10 meet?


Options are :

  • None
  • It minimizes disk space and provides fault tolerance.
  • It provides the tracks and the best possible performance.
  • It offers the highest performance and fault tolerance.
  • It minimizes disk space and to give the best possible performance.

Answer : It provides the tracks and the best possible performance.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 2

Scenario: Citrix Architect is planning a multi-server deployment services solution CGE. The solution must be highly available and to minimize the vdisk inconsistency. Why is the implementation of RAID 1 meet?


Options are :

  • It gives the best possible performance.
  • It offers the use of a minimal disk.
  • It provides striping.
  • None
  • It provides fault tolerance.

Answer : It provides fault tolerance.

Scenario: CGE need to define the management process image to the desktop publications. Some groups require version control method, which includes a thorough testing before production. How to architect to use Windows Deployment Services simplifies image management?


Options are :

  • By installing Windows applications in the image
  • With the introduction of standard base image of virtual desktops
  • By concentrating the volume of activation
  • None
  • With the introduction of the base image from the XV-file

Answer : With the introduction of standard base image of virtual desktops

Scenario: CGE need to define the management process image to the desktop publications. Some groups require version control method, which includes a thorough testing before production. How to architect hypervisor to use templates and snapshots simplifies image management and recovery?


Options are :

  • Using the Hypervisor API for desktops models
  • Using PowerShell script desktop deployment models
  • None
  • Use of Windows automatic installation kit (WAIK)
  • Using Workflow Studio to send desktops models

Answer : Using the Hypervisor API for desktops models

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 3

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions