1Y0-311 Citrix XenApp and XenDesktop 7.15 LTSR Advanced Exam Set 5

Scenario: A Citrix Engineer needs to establish the following timeout behavior for Receiver for Web: External users need to re-authenticate after 5 minutes of inactivity on Receiver for Web Internal users need to re-authenticate after 20 minutes of inactivity on Receiver for Web. Which two actions can the engineer configure to achieve the timeout behavior?


Options are :

  • Change NetScaler Gateway global timeout setting to 5 minutes.
  • Set Citrix policy “Session connection timer interval” to 5 minutes.
  • Leave StoreFront Receiver for Web session setting at default value.
  • Set Citrix policy “Session connection timer interval” to 20 minutes.
  • Change timeout value in StoreFront Receiver for Web Advanced Settings.

Answer : Leave StoreFront Receiver for Web session setting at default value.

Scenario: A Citrix Engineer is managing a XenApp and XenDesktop environment that has been built with the following site architecture: Site A has been created in datacenter A. Site B has been created in datacenter B. A NetScaler Gateway has been set up in each datacenter. Each Gateway has access to both Sites. The StoreFront server group in each Site is configured to enumerate resources from both Sites. Application D is available in Site B only. Optimal Gateway Routing has been configured so that the published resources in each Site are mapped to the local Gateway. A user located near datacenter A logs in through NetScaler Gateway and attempts to launch Application B. Which behavior is expected in this scenario?


Options are :

  • Resource enumeration occurs via Gateway B; the HDX connection is established using Gateway
  • None
  • Resource enumeration occurs via Gateway A; the HDX connection is established using Gateway
  • Resource enumeration and the HDX connection are established using Gateway

Answer : Resource enumeration occurs via Gateway A; the HDX connection is established using Gateway

1Y0-401 Designing Citrix XenDesktop 7.6 Solutions Exam Set 1

Which two requirements are needed for the target devices contained in a device collection to function successfully?


Options are :

  • All target devices in the device collection must be running from the same Operating System.
  • All target devices in the device collection must be accessible to the same user and/or user groups.
  • All target devices in the device collection must be located in the same XenApp and XenDesktop Site.
  • All target devices in the device collection must be assigned at least one vDisk.
  • All target devices in the device collection must have an Active Directory machine account which is managed by Provisioning Services.

Answer : All target devices in the device collection must be assigned at least one vDisk. All target devices in the device collection must have an Active Directory machine account which is managed by Provisioning Services.

Scenario: A XenApp Administrator has configured Multi-stream ICA in an environment. A user reports performance issues and the administrator discovers that Multi-stream ICA is NOT active for that user's session. What should the administrator do to resolve this issue?


Options are :

  • Upgrade to the latest version of Citrix Receiver.
  • Change the color quality to 16-bit.
  • Ensure that port 1494 is available.
  • Adjust the progressive compression level.

Answer : Upgrade to the latest version of Citrix Receiver.

Users accessing a XenApp hosted desktop by means of thin client devices can see a new network printer that has been provisioned by the administrator using the session printers policy but are unable to print to this printer. What can the administrator do to resolve this?


Options are :

  • Install the correct printer driver on the XenApp servers and the print server.
  • Enable the auto-create all client printers policy.
  • Add the new printer to the session printers policy.
  • Verify that the new printer has been added to the default printer policy.

Answer : Install the correct printer driver on the XenApp servers and the print server.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 1

Which two Citrix policy setting must a Citrix Engineer enable to apply Quality of Service (QoS) setting to the HDX protocol?


Options are :

  • Framework display channel
  • HDX Adaptive Transport
  • Multi-Stream user setting
  • Legacy graphics mode
  • Multi-Stream computer setting

Answer : Multi-Stream user setting Multi-Stream computer setting

Scenario: An administrator is deploying a new server to host the latest Citrix Web Interface version. During a test, the administrator has NOT been able to authenticate and access the list of published applications. Which two actions must the administrator take to debug the Citrix Web Interface?


Options are :

  • Use the Windows Debug tool to generate and analyze a memory dump.
  • Edit the web.config file to enable the debug feature.
  • Use the Process Monitor tool to monitor the IIS processes.
  • Specify a valid path to generate a log file.

Answer : Edit the web.config file to enable the debug feature. Specify a valid path to generate a log file.

Scenario: A Citrix Engineer selected the Provisioning Services write cache option „Cache on server persistent? for a vDisk. The engineer needs to ensure that users are NOT interrupted if a Provisioning Services server fails. What should the engineer configure to enable high availability (HA) on the Provisioning Services servers?


Options are :

  • Enable HA for the Provisioning Services database.
  • Change the write cache location to cache on the device.
  • Place the write cache on a Distributed File SystemReplication (DFSR) share.
  • Copy the write cache from one server to the second server.

Answer : Enable HA for the Provisioning Services database.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 2

Scenario: An administrator wishes to add disaster recovery capability to an existing XenAppenvironment. The administrator built some new servers into a disaster recovery datacenter that has a 1 GB link to the production datacenter. How should the administrator configure the new servers for users?


Options are :

  • Add the servers to the existing farm in the same zone and use a worker group and load balancing policy.
  • Add the servers to the existing farm in the same zone and use a custom load evaluator.
  • Add the servers to a new farm and use the site failover feature of Web Interface to provide access to the servers.
  • Add the servers to the existing farm into a new disaster recovery zone and use a preferential load balancing policy.

Answer : Add the servers to the existing farm in the same zone and use a worker group and load balancing policy.

How can a Citrix Engineer prevent access to certain local drives on Virtual Delivery Agents (VDAs) to all users using Workspace Environment Management (WEM)?


Options are :

  • Set the “Hide Specified Drives from Explorer” option setting in the environmental settings of WEM.
  • Use the Management Agent Host Configuration ADMX template to restrict the local drives.
  • Configure the Restrict Drives from the Explorer setting in the environmental setting of WEM.
  • Import the Infrastructure Services server ADMX template to Group Policy and hide the local drives.

Answer : Configure the Restrict Drives from the Explorer setting in the environmental setting of WEM.

The Provisioning Services servers are members of a specific _________, and they appear under the Component node in the Provisioning Services console. (Choose the correct option to complete the sentence.)


Options are :

  • Store
  • Farm
  • Device collection
  • Site

Answer : Site

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 3

Call center users accessing a XenApp hosted desktop by means of thin client devices are unable to see a new multi-function printer in their session. What can the administrator do to resolve this?


Options are :

  • Enable the auto-create all client printers policy.
  • Add the new printer to the session printers policy.
  • Install the correct printer drivers on the XenApp servers.
  • Verify that the new printer has been added to the default printer policy.

Answer : Add the new printer to the session printers policy.

Scenario: A Citrix Engineer is designing a multi-server Provisioning Services solution. The solution must be highly available and minimize the risk of vDisk inconsistency. Which configuration can the engineer implement to meet the needs of this design?


Options are :

  • Configure a separate local vDisk Store on two Provisioning Services on different sites and use the export/import feature to replicate the vDisks.
  • Configure a separate local vDisk Store on each Provisioning Services server and use rsync for Windows to replicate the vDisks.
  • Create the Provisioning Services vDisk Store on a configured, single Distributed File System (DFS) namespace.
  • Configure vDisk Store on a Common Internet File System (CIFS) share on a Network Attached Storage (NAS) for each Provisioning Services server.

Answer : Configure vDisk Store on a Common Internet File System (CIFS) share on a Network Attached Storage (NAS) for each Provisioning Services server.

Which configuration will lower the bandwidth requirements for HDX user sessions?


Options are :

  • Which configuration will lower the bandwidth requirements for HDX user sessions?
  • create Thinwire 8-bit mode registry key.
  • Disable Windows Media Redirection.
  • Configure the Workspace Environment management (WEM) System Optimization Setting.

Answer : Disable Windows Media Redirection.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 1

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions