Cisco CCNP Route 300-101 Practice Tests Set 4

Which four statements about RADIUS are true? (Choose four.)


Options are :

  • RADIUS is standard/open protocol
  • RADIUS utilizes TCP
  • RADIUS is Cisco proprietary protocol
  • RADIUS combines authentication and authorization
  • RADIUS encrypts entire packet
  • RADIUS encrypts only the password
  • RADIUS separates authentication and authorization
  • RADIUS utilizes UDP

Answer :RADIUS is standard/open protocol RADIUS combines authentication and authorization RADIUS encrypts only the password RADIUS utilizes UDP

200-125 Cisco Certified Network Associate Practice Exam Set 9


Refer to the exhibit. Which two statements are true given show cef interface s1/0 output on the exhibit? (Choose two.)?


Options are :

  • Interface Serial 1/0 ip address is 192.168.1.5 255.255.255.248
  • Policy based routing is enabled
  • Unicast Reverse Path Forwarding (uRPF) is enabled
  • Process Switching forwarding mechanism is enabled
  • Cisco Express forwarding mechanism method is enabled
  • Fast Switching forwarding mechanism method is enabled

Answer :Unicast Reverse Path Forwarding (uRPF) is enabled Cisco Express forwarding mechanism method is enabled

There are four BGP attribute types (Well-known mandatory, Well-known discretionary, Optional transitive and Optional non-transitive ). Well-known mandatory attributes have to exist in the BGP update and must be recognized by all BGP speakers. What are three well-known mandatory BGP attributes? (Choose three.)


Options are :

  • COMMUNITY
  • NLRI
  • AGGREGATOR
  • MUTLI_EXIT_DISC
  • LINK_STATE_ADVERT
  • NEXT_HOP
  • AS_PATH
  • ORIGIN
  • LOCAL_PREF

Answer :NEXT_HOP AS_PATH ORIGIN


Refer to the exhibit. R1 is considered to be a stub router. Stub Routers learn routes from nonstub routers. Stub routers do not forward EIGRP learned routes to other neighbors and nonstub routers do not send query messages to stub routers.

The network administrator has configured the R1 with the following command:

             R1(config)# router eigrp 100

             R1(config-router)# eigrp stub

Which routes are propagated from the stub router by default?


Options are :

  • redistributed
  • static
  • summary
  • receive-only
  • leak-map
  • connected

Answer :summary connected

Cisco Data Center Architecture Set 5

Which two solutions are used in an EIGRP network to reduce number of queries? (Choose two.)


Options are :

  • EIGRP Metric (k-values)
  • EIGRP Variance
  • EIGRP Authentication
  • EIGRP Stub Routing
  • EIGRP Summarization

Answer :EIGRP Stub Routing EIGRP Summarization

What protocol is used by routers implementing dynamic multipoint virtual private network (DMVPN) to determine the IP address of physical interface at the other end of the tunnel?


Options are :

  • Multiprotocol Label Switching (MPLS)
  • Next-Hop Resolution Protocol (NHRP)
  • Internet Key Exchange (IKE)
  • Multipoint Generic Routing Encapsulation (mGRE)

Answer :Next-Hop Resolution Protocol (NHRP)


Refer to the exhibit. Why R2 is not using path via 10.1.203.3 to reach network 10.1.103.0/29?


Options are :

  • Automatic summarization is disabled
  • R2 has formed neighbor adjacency with R1 only
  • Maximum metric variance has been set to 1
  • Topology base has been configured with maximum path 1 command

Answer :Maximum metric variance has been set to 1

Cisco CCNP Route 300-101 Practice Tests Set 1

Autonomous System Boundary Router (ASBR) is injecting an external route into OSPF domain. Which external type is injected by default?


Options are :

  • External type 1 (E1)
  • External type 3 (E3)
  • External type 2 (E2)
  • External type 5 (E5)

Answer :External type 2 (E2)


Refer to the exhibit. Networks from R3 EIGRP domain are successfully redistributed into OSPF domain. What will be the metric and the metric-type on router R1 for all routes redistributed from EIGRP?


Options are :

  • Metric 30 and Metric-type E2
  • Metric 20 and Metric-type E1
  • Metric 40 and Metric-type E2
  • Metric 30 and Metric-type E1
  • Metric 40 and Metric-type E1
  • Metric 20 and Metric-type E2

Answer :Metric 40 and Metric-type E2


Refer to the exhibit. Router CE-1 on autonomous system 64511 is a single link multi homed with ISP-A and ISP-B. System administrator has run command show ip bgp summary, based on the output which three statements are true? (choose three.)


Options are :

  • CE-1 router is not able to establish neighbor relationship with neighbor 172.16.0.1
  • CE-1 router has successfully established iBGP neighbor relationship with neighbor 10.0.0.1
  • CE-1 router has successfully established eBGP neighbor relationship with neighbor 10.0.0.1
  • CE-1 router has successfully established iBGP neighbor relationship with neighbor 172.16.0.1
  • CE-1 router has successfully established eBGP neighbor relationship with neighbor 172.16.0.1
  • CE-1 router bgp router-id is 192.168.1.1
  • CE-1 router has tried 7 times to communicating with neighbor 10.0.0.1
  • CE-1 router is actively communicating with neighbor 172.16.0.1

Answer :CE-1 router is not able to establish neighbor relationship with neighbor 172.16.0.1 CE-1 router has successfully established eBGP neighbor relationship with neighbor 10.0.0.1 CE-1 router bgp router-id is 192.168.1.1

200-105 Inter connecting Cisco Networking Devices Exam Set 5

If OSPF interface priority is 1 for all routers in multi-access network type, what is used to break the tie and elect the Designated Router (DR) and Backup Designated Router (BDR)?


Options are :

  • Lowest router ID
  • Highest interface IP address
  • Lowest interface IP address
  • Highest router ID

Answer :Highest router ID

What are two main components of Cisco Express Forwarding (CEF)?


Options are :

  • Neighbor routing table
  • Adjacency Table
  • Topology Table
  • Fast Switching
  • Address Resolution Base
  • Forwarding Information Base (FIB)

Answer :Adjacency Table Forwarding Information Base (FIB)

When EIGRP returns a stuck in active (SIA) message, it means that it has not received a reply to a query. What are most common reasons for SIA routes? (Choose three.)


Options are :

  • A failure causes traffic on a link to flow in only one direction
  • Automatic network summarization is in effect
  • The router is too busy to answer the query
  • No feasible successors
  • EIGRP Active Enhancement Process is in effect
  • Stub router is configured
  • The link between the two routers is not good

Answer :A failure causes traffic on a link to flow in only one direction The router is too busy to answer the query The link between the two routers is not good

100-105 Net Cert Interconnecting Cisco Networking Exam Set 1

Which of the following are Cisco IP SLA measurement capabilities? (Select all that apply.)


Options are :

  • One-way packet delay
  • Packet loss statistics and connectivity
  • TCAM management
  • TCP and UDP port number assignment
  • ICMP response time and ICMP connectivity
  • Jitter

Answer :One-way packet delay Packet loss statistics and connectivity ICMP response time and ICMP connectivity Jitter


Refer to the exhibit. System administrator has issued command show ip interface brief. Which two statements are true when tunnel0 interface is in up/down state?


Options are :

  • Router R1 cannot find a route to tunnel destination address
  • Tunnel interfaces are supported only on mGRE
  • Physical interface is shutdown by administrator
  • Physical interface where tunnel is configured is down

Answer :Router R1 cannot find a route to tunnel destination address Physical interface where tunnel is configured is down

System administrator has configured interface GigabitEthernet 0/0 with the following command:

          CE-1(config-if)#ntp broadcast client

Which two of the following statements are true regarding this configuration? (Choose two.)


Options are :

  • Router CE-1 will become NTP server, and serve NTP clients connected to interface GigabitEthernet 0/0
  • Router CE-1 will be allowed to send NTP broadcast packets on interface GigabitEthernet 0/0
  • NTP service is activated on router CE-1
  • Router CE-1 will be allowed to receive NTP broadcast packets on interface GigabitEthernet 0/0
  • Router CE-1 will be not be allowed to receive NTP broadcast packets only unicast on interface GigabitEthernet 0/0
  • Router CE-1 will be not be allowed to send NTP broadcast packets only unicast on interface GigabitEthernet 0/0

Answer :NTP service is activated on router CE-1 Router CE-1 will be allowed to receive NTP broadcast packets on interface GigabitEthernet 0/0

210-065 Implementing Cisco Video Network Devices Exam Set 3


Refer to the exhibit. Which statement is NOT true given the output displayed in the exhibit?


Options are :

  • Router R1 has established EIGRP neighbor adjacency with IP address 10.10.1.4
  • Router R1 is configured with Multi-Virtual routing and forwarding (VRF)
  • Router R1 is configured with Easy Virtual Network (EVN)
  • Router R1 is configured with autonomous system number 1
  • Router R1 its been configured with Address-Family commands

Answer :Router R1 is configured with Multi-Virtual routing and forwarding (VRF)

OSPF Area 1 is a stub area, which Link State Advertisement (LSA) types are not allowed in this area?


Options are :

  • LSA Type 4: Summary ASBR LSA
  • LSA Type 3: Summary LSA
  • LSA Type 2: Network LSA
  • LSA Type 1: Router LSA
  • LSA Type 5: Autonomous system external LSA

Answer :LSA Type 4: Summary ASBR LSA LSA Type 5: Autonomous system external LSA

Which two of the following answers are true regarding Provider Independent (PI) addresses? (Choose two.)


Options are :

  • Addresses are assigned by an ISP
  • IP addresses remain the same regardless of how many provider you change
  • Addresses are assigned by the Regional Internet Registry
  • Summarization is enabled always on Provider Independed (PI) addresses
  • When you change the provider you will get new addresses
  • Subnetting will not be allowed

Answer :IP addresses remain the same regardless of how many provider you change Addresses are assigned by the Regional Internet Registry

Cisco 100-101 Interconnecting Cisco Networking Devices Exam Set 1

A router has learned same remote network route to XYZ from following sources:

    RIPv2

    External EIGRP

    Inter Area route OSPF

    External E1 route OSPF

    External E2 route OSPF

    Internal BGP

    External BGP

Which route will be added to the routing table?


Options are :

  • Only External BGP route will be added to routing table
  • All entries will be added to routing table
  • Only External Type 2 OSPF route will be added to routing table
  • Only Internal BGP route will be added to routing table
  • Only RIPv2 will be added to routing table
  • Only External Type 1 OSPF route will be added to routing table
  • Only Inter Area OSPF route will be added to routing table

Answer :Only External BGP route will be added to routing table

Company-A router has received a DHCP address and default static route from ISP-A. What is the administrative distance for the default static route received from ISP-A?


Options are :

  • 200
  • 110
  • 254
  • 90
  • 1
  • 255
  • 120
  • 115

Answer :254

Which feature will dynamically measure the health of an IP network, and Policy-based routing can use the outcome to choose particular route?


Options are :

  • Access Control List (ACL)
  • Interior Gateway Protocols (IGP)
  • Simple Network Management Protocol (SNMP)
  • IP Service Level Agreements (SLAs)

Answer :IP Service Level Agreements (SLAs)

200-125 Cisco Certified Network Associate (CCNA) Exam Set 3


Refer to the exhibit. Router CE-1 is Edge router. From configuration displayed in the exhibit, what term is given to the Access Control List configured?


Options are :

  • Periodic
  • Forever
  • Regular
  • Infinite
  • Absolute
  • Active
  • Fixed
  • Time-range

Answer :Absolute


Refer to the exhibit. The network administrator wants R1 to send only the summarized route of LAN1, LAN2 and LAN3 to router R2. Which configuration will accomplish this?


Options are :

  • R1(config)#router eigrp 100 R1(config-router)#auto-summary
  • R1(config)# interface serial 1/0 R1(config-if)# ip summary-address eigrp 100 10.1.0.0 255.255.252.0
  • R1(config)# interface serial 1/0 R1(config-if)# ip summary-address eigrp 100 10.1.0.0 255.255.255.0
  • R1(config)# interface serial 0/1 R1(config-if)# ip summary-address eigrp 100 10.1.0.0 255.255.252.0

Answer :R1(config)# interface serial 1/0 R1(config-if)# ip summary-address eigrp 100 10.1.0.0 255.255.252.0

In which OSPF neighbor state two routers start negotiating the database sequence and select master/slave logic?


Options are :

  • Two-way
  • Loading
  • Attempt
  • Full
  • Init
  • EX-change
  • Down
  • EX-start

Answer :EX-start

400-101 CCIE Routing and Switching Written Practice Exam Set 10

Internet Assigned Numbers Authority (IANA) is a non-profit private corporation that oversees which three of the following? (Choose three.)


Options are :

  • Manage Domain Name System (DNS) root zone
  • Manage global pool of IPv4 and IPv6 addresses
  • Manage global pool of autonomous system numbers (ASNs)
  • Manage World Wide Web Consortium (W3C)
  • Manage Local Internet registry
  • Manage country code top-level domain

Answer :Manage Domain Name System (DNS) root zone Manage global pool of IPv4 and IPv6 addresses Manage global pool of autonomous system numbers (ASNs)

Routing protocols are not able to understand each other’s metric and are incompatible, you can use route redistribution feature to exchange routing information between different routing protocols. Which techniques are least likely to introduce route feedback (i.e. routing loops)? (Choose two.)


Options are :

  • Two-way route redistribution from one boundary router
  • Single-homed route redistribution from one ISP router
  • One-way route redistribution from two or more boundary router
  • One-way route redistribution from one boundary router
  • Dual-homed route redistribution from two or more ISP routers

Answer :Two-way route redistribution from one boundary router One-way route redistribution from one boundary router

Which of the following OSI layers are not protected by IPsec Tunnel mode configuration? (Choose two.)


Options are :

  • Layer 5 – Session
  • Layer 7 – Application
  • Layer 3 – Network
  • Layer 2 – Data Link
  • Layer 1 – Physical
  • Layer 6 – Presentation
  • Layer 4 – Transport

Answer :Layer 2 – Data Link Layer 1 – Physical

642-732 Conducting Cisco Unified Wireless Site Survey Exam Set 1


Refer to the exhibit. Which two statements about ip sla 4 configuration are true? (Choose two.)


Options are :

  • IP SLA configured does require IP SLA responder to be configured
  • IP SLA configured will gather connectionless-oriented statistics
  • IP SLA configured does NOT require IP SLA responder to be configured
  • IP SLA configured will gather connection-oriented statistics

Answer :IP SLA configured does NOT require IP SLA responder to be configured IP SLA configured will gather connection-oriented statistics

If PC-A has forwarded an IPv6 packet with larger MTU than allowed on the segment to a router R1. What action will router R1 take?


Options are :

  • Fragment the packet and forward
  • Return “ICMPv6 fragment packet message”
  • Return “ICMPv6 Packet Too Big message”
  • Drop silently

Answer :Return “ICMPv6 Packet Too Big message”


Refer to the exhibit. System administrator has run command show ip bgp, based on the output which three statements are true? (choose three.)


Options are :

  • All networks with next hop address set to 0.0.0.0 are in active mode and router is searching next hop address
  • Network 172.20.210.0/24 is learned through iBGP peer
  • Network 10.200.0.0/24 is also learned through another method with better administrative distance
  • Network 192.168.1.0 was injected through redistribution
  • Path to network 10.1.1.0/24 is selected as best and offered to routing table
  • Network 10.200.0.0/24 is learned through RIPv2 protocol
  • Network 10.200.0.0/24 is not reachable
  • For all networks starting with first octet of 10.x.x.x there is no Metric configured and if there is no metric those networks are not reachable

Answer :Network 172.20.210.0/24 is learned through iBGP peer Network 10.200.0.0/24 is also learned through another method with better administrative distance Path to network 10.1.1.0/24 is selected as best and offered to routing table

642-732 Conducting Cisco Unified Wireless Site Survey Exam Set 3

Which setting must match before two OSPF routers can become neighbors?


Options are :

  • K-values
  • IP MTU
  • Passive interfaces
  • Router-id

Answer :IP MTU

Which are three major Simple Network Management Protocol (SNMP) elements/components?  (Choose three).


Options are :

  • SNMP Server
  • SNMP Manager
  • SNMP Agent
  • SNMP MIB
  • SNMP Zone
  • SNMP Stratum
  • SNMP Threat

Answer :SNMP Manager SNMP Agent SNMP MIB


Refer to the exhibit. Network administrator has configured CE-1 router with the commands displayed in exhibit. Which statement is true?


Options are :

  • aaa new-model command is enabled by default
  • If authentication fails with radius group it will fall back to tacacs group
  • If authentication fails with server-based authentication local based authentication will be used
  • Password $3cr3t has to be configure in RADIUS server as well
  • Local authentication will be used only if communication with Radius server fails

Answer :Local authentication will be used only if communication with Radius server fails

Cisco 300-209 Implementing Secure Mobility Solutions Exam Set 7

Unicast Reverse Path Forwarding (uRPF) is method of preventing malicious spoofed packets entering the network.  uRPF compares source IP address of incoming packet with Forwarding Information Base (FIB) to determine whether that IP address is routable.

Which three modes are available with uRPF? (Choose Three.)


Options are :

  • Loose mode
  • Floating mode
  • Transparent mode
  • Access mode
  • VRF mode
  • Strict mode
  • Exact mode
  • Server mode
  • Client mode

Answer :Loose mode VRF mode Strict mode


Options are :

  • Router CE-1 will forward the packet as its matched in allow-default, as that command is default and it will match all paths
  • Router CE-1 will drop the packet because strict mode is configured and packet has arrived in wrong interface
  • You can not configure uRPF in serial interface, only Ethernet interfaces are capable of uRPF
  • Router CE-1 will drop the packet because the source is not in Forwarding Information Base (FIB)
  • Router CE-1 will forward the packet as its permitted in ACL

Answer :Router CE-1 will forward the packet as its permitted in ACL

Which four statements about TACACS+ are true? (Choose four.)


Options are :

  • TACACS+ encrypts entire packet
  • TACACS+ is Cisco proprietary protocol
  • TACACS+ separates authentication and authorization
  • TACACS+ encrypts only the password
  • TACACS+ is standard/open protocol
  • TACACS+ combines authentication and authorization
  • TACACS+ utilizes TCP
  • TACACS+ utilizes UDP

Answer :TACACS+ encrypts entire packet TACACS+ is Cisco proprietary protocol TACACS+ separates authentication and authorization TACACS+ utilizes TCP

300-101 Implementing Cisco IP Routing (ROUTE) Practice Exam Set 3


Refer to the exhibit. Customer-A on AS64511 would like to influence the ISP-A routers so that all returning traffic to Customer-A network uses the primary link. Which BGP attribute needs to be configured on router CE-1 and CE-2 to accomplish this?


Options are :

  • BGP Origin
  • BGP LocalPref
  • BGP AS_Path
  • BGP MED
  • BGP Weight

Answer :BGP MED

.


Refer to the exhibit. Router R1 has been configured as SLAAC DHCPv6 where it will allow router R2 to obtain prefix, prefix length and default gateway address as well as other DHCP attributes form router R1 but router R2 is required to configure itself with unique IPv6 address.

Which command needs to be configured on R2 interface to obtain Stateless DHCPv6 information?


Options are :

  • R2(config)# interface Ethernet 0/0 R2(config-if)# ipv6 dhcp slaac R2(config-if)# no shutdown
  • R2(config)# interface Ethernet 0/0 R2(config-if)# ipv6 address default R2(config-if)# no shutdown
  • R2(config)# interface Ethernet 0/0 R2(config-if)# ipv6 address autoconfig R2(config-if)# no shutdown
  • R2(config)# interface Ethernet 0/0 R2(config-if)#ipv6 dhcp client R2(config-if)# no shutdown

Answer :R2(config)# interface Ethernet 0/0 R2(config-if)# ipv6 address autoconfig R2(config-if)# no shutdown

When a returning packet is taking different path back to the source, which type of routing is this known as?


Options are :

  • Symmetric Routing
  • Unconverged routing
  • Unsynchronized routing
  • Asymmetric Routing

Answer :Asymmetric Routing

200-105 Interconnecting Cisco Networking Devices Part Exam Set 7

Single Router on a Company-A on AS: 64510 is Dual-homed with single ISP router on AS: 64511 and wants to equal load balancing between two links. Which three actions do you have to perform to enable load sharing? (Choose three)


Options are :

  • On BGP protocol configuration enable load balancing per neighbor
  • On BGP protocol configuration, configure eBGP multihop
  • On BGP protocol configuration, configure loopback interface as a update-source
  • On BGP protocol configuration, increase MTU size
  • Increase Variance on MED for both routers
  • Create BGP confederation to subdivide AS: 64510 in two and advertise both links as one
  • Create Loopback interface on both routers

Answer :On BGP protocol configuration, configure eBGP multihop On BGP protocol configuration, configure loopback interface as a update-source Create Loopback interface on both routers


Refer to the exhibit. Which statement is true based on output displayed in the exhibit?


Options are :

  • Neighbor 2.2.2.2 cannot become DR or BDR because priority is set to 0
  • Priority values are default OSPF priority values
  • Neighbor 2.2.2.2 will become DR because it has lowest priority set
  • Neighbor 4.4.4.4 is OSPFv3 router

Answer :Priority values are default OSPF priority values


Refer to the exhibit. Router CE-1is performing Network Address Translation (NAT) from private RFC 1918 address to external addresses.

CE-1 is translating all Local Area Network addresses from network 192.168.1.0 into a single internet facing address 192.0.1.1 known as Many-To-One address mapping.

Which type of Network Address Translation is implemented on router CE-1?


Options are :

  • MAC-NAT
  • STAT
  • PAT
  • DNAT

Answer :PAT

300-101 Implementing Cisco IP Routing (ROUTE) Practice Exam Set 2


Refer to the exhibit. Network administrator has issued command show ntp status on router CE-1. Which statement is NOT true given the output displayed in the exhibit?


Options are :

  • Router with IP address 172.16.10.2 is four hops away from authoritative time source
  • Router with IP address 172.16.10.2 is NTP server
  • Router CE-1 has synchronized its time from NTP server with IP address 172.16.10.2
  • Router CE-1 is NTP client

Answer :Router with IP address 172.16.10.2 is four hops away from authoritative time source


Refer to the exhibit. Router CE-2 located in AS: 64511 is learning about path to network 1.0.0.0/8 from router ISP-A-R1 located in AS 64510, through iBGP CE-1 router is learning path to same destination as it is advertising to ISP-A-R2 router located in AS: 64510, what BGP attribute ISP-A-R2 router will use to prevent looped network being advertised back to AS: 64510?


Options are :

  • BGP AS_Path
  • BGP Origin_Path
  • BGP LocalPref_Path
  • BGP Metric_Path
  • BGP Weight_Path

Answer :BGP AS_Path

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions