Cisco CCNP Route 300-101 Practice Tests Set 3


Refer to the exhibit. EIGRP has been configured on all routers in the topology. EIGRP supports equal and unequal cost load balancing by manipulating variance.

Given the sample exhibited metric values, if the administrator has changed the variance to the value of variance 2 which paths will be used as unequal load balancing path by R1 to reach R5 LAN network 10.0.0.0/24?


Options are :

  • Path R1->R5
  • Path R1->R2->R5
  • Path R1->R3->R5 and Path R1->R4->R5
  • Path R1->R2->R5 and Path R1->R3->R5 and Path R1->R4->R5
  • Path R1->R2->R5 and Path R1->R3->R5
  • Path R1->R4->R5

Answer :Path R1->R2->R5 and Path R1->R3->R5

Cisco 300-209 Implementing Secure Mobility Solutions Exam Set 2

Router’s architecture is segmented into planes. Which plane will execute dynamic routing protocol update exchanged and tables, for example neighbor table or topology table?


Options are :

  • Data Plane
  • Stack Plane
  • Control Plane
  • Management plane

Answer :Control Plane

What is maximum transmission unit (MTU) for a path in IPv6 network?


Options are :

  • minimum link MTU of all links
  • 1500 bytes
  • 1518 bytes
  • 64 bytes

Answer :minimum link MTU of all links


Refer to the exhibit. System administrator has run command show ip bgp, based on the output which three statements are true? (choose three.)


Options are :

  • Multi_Exit_Disc (MED) is set to zero (0) for all networks
  • All locally generated routes get Cisco default weight of 32768 and all BGP learned routes get Cisco default weights of zero (0)
  • Local Preference for all networks is set to 100
  • Weight attribute is well-known mandatory attribute and has to be present on all BGP updates
  • Network 172.20.210.0 has the highest Local Preference and is primary link
  • Networks with no Metric set are still waiting to be notified by neighbors about NLRIs
  • Weight is been configured only for seven networks, all networks are still waiting to be configured with weights
  • Local Preference of 100 is set only for network 172.20.210.0/24 all other networks have Local Preference of zero (0)

Answer :Multi_Exit_Disc (MED) is set to zero (0) for all networks All locally generated routes get Cisco default weight of 32768 and all BGP learned routes get Cisco default weights of zero (0) Local Preference for all networks is set to 100

200-105 Inter connecting Cisco Networking Devices Exam Set 5


Refer to the exhibit. PPP authentication between PE-1 and CE-1 is not successful. Based on configuration displayed in output, what is the cause of the problem?


Options are :

  • Password does not match
  • ppp chap password command should be used
  • ppp chap hostname command should be used
  • Usernames do not match

Answer :Usernames do not match


Refer to the exhibit. R1 has lost path to network 10.1.2.0 of LAN2, and does not have an FS in its topology table, it looks for an alternative path to the destination - known as going active on a route, and starts querying the neighbors. R1 has sent a query message to R2.

R2 does not have an alternative route, it queries each of its own neighbors for an alternative path, R2 sends a query to R3.

R3 has not been able to reply because router is too busy to answer the query.

Before Active Process Enhancement feature was introduced what would have happened to adjacency between R1 and R2?


Options are :

  • The neighbor relationship between Routers R1 and R2 will flap
  • The neighbor relationship between Routers R1 and R2 will reset
  • The neighbor relationship between Routers R1 and R2 remains intact
  • The neighbor relationship between Routers R1 and R2 will be up

Answer :The neighbor relationship between Routers R1 and R2 will reset

Network Time Protocol (NTP) version 4 is the latest version of NTP. Currently both NTPv3 and NTPv4 are used in production networks. Which statement is true  about Network Time Protocol (NTP) version 4?


Options are :

  • NTPv4 is not backward compatible with NTPv3
  • NTPv4 runs over TCP
  • NTPv4 is still under development and not released
  • NTPv4 supports time synchronization over IPv6 network
  • NTPv4 is not supported on Cisco devices
  • NTPv4 is Cisco proprietary protocol

Answer :NTPv4 supports time synchronization over IPv6 network

100-105 Net Cert Interconnecting Cisco Networking Exam Set 6

Refer to the exhibit. Router R1 has been configured with address family and Virtual instance name “EIGRP-AddressFamily” and Router R2 with Virtual instance name “EIGRP”.

Which statement is correct regarding named EIGRP configuration?


Options are :

  • R1 and R2 will not establish neighbor relationship because the EIGRPv6 has not been configured on the interface
  • R1 and R2 will not establish neighbor relationship because Virtual instance name is different
  • R1 and R2 will not establish neighbor relationship because the network command is not entered.
  • R1 and R2 will establish neighbor relationship

Answer :R1 and R2 will establish neighbor relationship


Refer to the exhibit. Router CE-1 is performing Network Address Translation (NAT). CE-1 is translating all Local Area Network addresses from network 192.168.1.0 into a single internet facing address 192.0.1.1 known as Many-To-One address mapping.

Which statement is true about Network Virtual Interface Translation (NVI)?


Options are :

  • NVI packets are Routed, then Translated, then Routed again
  • NVI packets are Routed to Inside Interface, then Translated
  • NVI packets are Routed, then Translated
  • NVI packets are Translated, then Routed

Answer :NVI packets are Routed, then Translated, then Routed again

Refer to the exhibit. Which statement is NOT true about ospf protocols running on router R1?


Options are :

  • Router R1 is area border router (ABR)
  • Router R1 is redistributing static routes
  • Router R1 OSPF process-id is 1
  • Router R1 OSPF router-id is 1.1.1.1
  • Router R1 is autonomous system boundary router (ASBR)

Answer :Router R1 is redistributing static routes

300-320 Designing Cisco Network Service Architectures Exam Set 6

What address ranges has been set aside by The Internet Assigned Numbers Authority (IANA) and explained in  RFC 1918?  (Choose three.)


Options are :

  • 169.254.0.0 to 169.254.255.255
  • 172.16.0.0 to 172.31.255.255
  • 127.0.0.0 to 127.255.255.255
  • 10.0.0.0 to 10.255.255.255
  • 192.0.2.0 to 192.0.2.255
  • 240.0.0.0 to 255.255.255.254
  • 192.168.0.0 to 192.168.255.255

Answer :172.16.0.0 to 172.31.255.255 10.0.0.0 to 10.255.255.255 192.168.0.0 to 192.168.255.255


Refer to the exhibit. Router R2 is boundary router. System administrator is redistributing EIGRP and RIP learned routes to OSPF domain,

From configuration displayed in the exhibit, which statement is true?


Options are :

  • No RIP routes will be redistributed as no auto-summary configuration is missing
  • Redistribution will be successful for both EIGRP and RIP routes with metric of 100
  • EIGRP routes will get receive metric of 90 while RIP routes will receive metric of 100
  • Redistribution will be successful for both EIGRP and RIP routes with default metric of 20
  • EIGRP routes will be redistributed but no RIP route will be redistributed as 100 is beyond maximum metric is hop count
  • No routes from both protocols EIGRP or RIP will be redistributed

Answer :Redistribution will be successful for both EIGRP and RIP routes with metric of 100

Which OSPF router type will generate Link State Advertisement (LSA) Type 5 – OSPF ASBR External LSA?


Options are :

  • Backbone Router
  • Area Border Router (ABR)
  • Designated Router (DR)
  • Backup Designated Router (BDR)
  • Autonomous System Boundary Router (ASBR)
  • None, LSA Type 5 are legacy LSA and are not used anymore in OSPF
  • Internal Router
  • All OSPF routers

Answer :Autonomous System Boundary Router (ASBR)

100-105 Net Cert Interconnecting Cisco Networking Exam Set 3


Refer to the exhibit. Which BGP show command was used to display the output on the exhibit?


Options are :

  • show ip bgp
  • show ip bgp topology *
  • show ip bgp summary
  • show ip route bgp
  • show ip bgp neighbor

Answer :show ip bgp


Refer to the exhibit. Which commands will complete Policy-Based Routing (PBR) configuration to ensure packets originating from PC-A are forwarded to next-hop of router R3 172.16.13.3 and packets originating from PC-B are forwarded to next-hop of router R2 172.16.12.2?


Options are :

  • R1(config-route-map)#interface e0/0 R1(config-if)# ip policy route-map LOAD_BALANCE
  • R1(config-route-map)#interface e0/0 R1(config-if)# ip policy route-map LOAD_BALANCE in
  • R1(config-route-map)#ip policy route-map LOAD_BALANCE
  • R1(config-route-map)#interface e0/0 R1(config-if)# ip policy route-map LOAD_BALANCE out

Answer :R1(config-route-map)#interface e0/0 R1(config-if)# ip policy route-map LOAD_BALANCE


Refer to the exhibit. System administrator has run command show ip bgp, and found out that local router is learning the path to network 10.1.1.0/24 from five valid BGP  peers,  (best path is hidden with ?) based on the output which path will be chosen as best path by router CE-1 and offer to routing table?


Options are :

  • CE-1 router will use next hop BGP peer 192.168.10.5 because it has been redistribution
  • CE-1 router will use next hop BGP peer 172.25.0.4 because it has highest Weight attribute
  • CE-1 router will use next hop BGP peer 172.16.0.2 because it has shortest AS_Path attribute
  • CE-1 router will use next hop BGP peer 172.20.0.2 because it has lowest LocPref attribute
  • CE-1 router will use next hop BGP peer 172.25.0.4 because it has longest AS_Path attribute
  • CE-1 router will use next hop BGP peer 192.168.0.2 because it has highest Metric attribute

Answer :CE-1 router will use next hop BGP peer 172.25.0.4 because it has highest Weight attribute

642-732 Conducting Cisco Unified Wireless Site Survey Exam Set 3


Refer to the exhibit. Router CE-1is performing Network Address Translation (NAT) from private RFC 1918 address to external addresses.

CE-1 is translating all Local Area Network addresses from network 192.168.1.0 into a single internet facing address 192.0.1.1 known as Many-To-One address mapping also known as overloading or Port address Translation.

Which name is given in Network Address Translation terminology from perspective of CE-1 router for all addresses connected to Local Area Network before they are translated?


Options are :

  • Outside Local Address
  • Inside Local Address
  • Inside Global Address
  • Outside Local Address

Answer :Inside Local Address

Refer to the exhibit. Router CE-1 is Edge router and is configured with ACL to prevent all malicious traffic from entering the internal network. What term is given to the ACL configured on router CE-1?


Options are :

  • Active ACL
  • Forever ACL
  • Periodic ACL
  • Infrastructure ACL
  • Time-range ACL
  • Fixed ACL
  • Infinite ACL
  • Absolute ACL

Answer :Infrastructure ACL


Which four DHCPv6 messages are exchanged between DHCPv6 client and DHCPv6 server? (Choose four)


Options are :

  • DHCPv6 Reply message
  • DHCPv6 Solicit message
  • DHCPv6 Offer message
  • DHCPv6 Request message
  • DHCPv6 Discovery message
  • DHCPv6 Advertise message

Answer :DHCPv6 Reply message DHCPv6 Solicit message DHCPv6 Request message DHCPv6 Advertise message

200-125 Cisco Certified Network Associate (CCNA) Exam Set 1


Refer to the exhibit. System administrator is receiving syslog message displayed in the exhibit. Which two statements about this message are true? (Choose two) 


Options are :

  • Router PE-1 is sending clear-text authentication packets
  • Router CE-1 is NOT sending authentication packets
  • Router PE-1 is sending encrypted authentication packets
  • Router CE-1 is sending encrypted authentication packets
  • Router PE-1 is NOT sending authentication packets
  • Router CE-1 is sending clear-text authentication packets

Answer :Router CE-1 is NOT sending authentication packets Router PE-1 is sending encrypted authentication packets


Refer to the exhibit. CE-1 is seeing routes that are advertised by router CE-2, and CE-2 is seeing routes that are advertised by CE-1. Which two statements are true when using EIGRP and an L2 MPLS VPN? (Choose two.)


Options are :

  • Routers CE-2 has established an EIGRP neighbor relationship with router CE-1
  • Routers CE-2 has established an EIGRP neighbor relationship with router PE-1
  • Routers CE-1 has established an EIGRP neighbor relationship with router PE-1
  • Routers CE-2 has established an EIGRP neighbor relationship with router PE-2
  • Routers CE-1 has established an EIGRP neighbor relationship with router PE-2
  • Routers CE-1 has established an EIGRP neighbor relationship with router CE-2

Answer :Routers CE-2 has established an EIGRP neighbor relationship with router CE-1 Routers CE-1 has established an EIGRP neighbor relationship with router CE-2

The network engineer wants to gather detailed information using Cisco IOS IP Service Level Agreements (SLAs). Engineer starts by configuring IP SLA router which will generate traffic to be monitored. Which other task does the network engineer have to complete?


Options are :

  • IP SLA Reply
  • IP SLA Responder
  • IP SLA Update
  • IP SLA Acknowledge
  • IP SLA Query

Answer :IP SLA Responder

Cisco 300-209 Implementing Secure Mobility Solutions Exam Set 5


Refer to the exhibit. System administrator wants to redistribute learned networks from EIGRP domain to OSPF domain except network 10.3.9.0/24.

From configuration displayed in the exhibit, which route filtering statement is true?


Options are :

  • Configuration will not work as extended ACL has been configured incorrectly, source and destination address cannot be host address
  • Configuration has been completed correctly and all learned networks from EIGRP domain except network 10.3.9.0/24 will be redistributed
  • Configuration has not been completed correctly and no networks from EIGRP domain will be redistributed because wrong name has been used under route-map redistribute command
  • Configuration has not been completed correctly and no networks from EIGRP domain will be redistributed, because route map use only Standard ACLs no Extended ACLs

Answer :Configuration has been completed correctly and all learned networks from EIGRP domain except network 10.3.9.0/24 will be redistributed


Refer to the exhibit. Customer-A on AS64511 would like to use Primary Link to forward all external traffic towards the ISP. Which BGP attribute needs to be configured to accomplish this?


Options are :

  • BGP LocalPref
  • BGP MED
  • BGP Origin
  • BGP Weight
  • BGP AS_Path

Answer :BGP LocalPref

There are four BGP attribute types

     Well-known mandatory,

     Well-known discretionary,

     Optional transitive and

     Optional non-transitive

Which BGP attribute is optional non-transitive?


Options are :

  • LOCAL_PREF
  • NEXT_HOP
  • AS_PATH
  • ORIGIN
  • MUTLI_EXIT_DISC

Answer :MUTLI_EXIT_DISC

210-065 Implementing Cisco Video Network Devices Exam Set 1


Refer to the exhibit. Router CE-1 is performing Network Address Translation (NAT). CE-1 is translating all Local Area Network addresses from network 192.168.1.0 into a single internet facing address 192.0.1.1 known as Many-To-One address mapping.

Network technician has been instructed not to use classic NAT, what type of NAT interface network technician has configured?


Options are :

  • NPTv6
  • STAT
  • NVI
  • PAT
  • DNAT

Answer :NVI


Refer to the exhibit. From configuration of Router CE-1 and router PE-1 displayed in the exhibit, which three statements are true? (Choose three.)


Options are :

  • Router PE-1 is using OSPF authentication type 1 with authentication command configured in router OSPF 1 process
  • Because area 0 authentication message-digest command is missing on router CE-1, routers will not be able to form neighbor adjacency
  • Because ip ospf authentication message-digest interface command is missing on router PE-1, routers will not be able to form neighbor adjacency
  • Router PE-1 has enabled OSPF authentication for entire area 0
  • Router CE-1 is using OSPF authentication type 0 with authentication command configured in interface s1/0
  • Router CE-1 has enabled OSPF authentication for interface s1/0 only
  • Router PE-1 and router CE-1 will be able to form neighbor adjacency
  • Router PE-1 and router CE-1 will not be able to form neighbor adjacency

Answer :Router PE-1 has enabled OSPF authentication for entire area 0 Router CE-1 has enabled OSPF authentication for interface s1/0 only Router PE-1 and router CE-1 will be able to form neighbor adjacency


Refer to the exhibit. System administrator wants to redistribute only EIGRP learned networks from neighbor 172.16.24.4 to OSPF domain.

Which command sequence will complete the desired configuration?


Options are :

  • R2(config)# ip prefix-list ONLY-FROM-NEIGHBOR-4 seq 5 permit 10.0.0.0/8 eq 8
  • R2(config)# ip prefix-list ONLY-FROM-NEIGHBOR-4 seq 5 permit 10.0.0.0/8 all
  • R2(config)# ip prefix-list ONLY-FROM-NEIGHBOR-4 seq 5 permit 10.0.0.0/8 le 24
  • R2(config)# ip prefix-list ONLY-FROM-NEIGHBOR-4 seq 5 permit 10.0.0.0/8
  • R2(config)# ip prefix-list ONLY-FROM-NEIGHBOR-4 seq 5 permit 10.1.1.0/24
  • R2(config)# ip prefix-list ONLY-FROM-NEIGHBOR-4 seq 5 permit 10.0.0.0/8 gt 24

Answer :R2(config)# ip prefix-list ONLY-FROM-NEIGHBOR-4 seq 5 permit 10.0.0.0/8 le 24

210-260 Implementing Cisco Network Security Practice Exam Set 4

Router’s architecture is segmented into planes. Which plane is responsible for switching packets through routers interface and applying and inbound or outbound access control list?


Options are :

  • Control Plane
  • Stack Plane
  • Data Plane
  • Management plane

Answer :Data Plane


Refer to the exhibit. R1 receives a default route from R2 but no routes for network 2001:db8:cafe:3::/64 and 2001:db8:cafe:4::/64. This is because R2 uses which option the end of IPv6 rip name default-information interface command?


Options are :

  • ipv6 rip ROUTING-RIPng default-information static
  • ipv6 rip ROUTING-RIPng default-information originate
  • ipv6 rip ROUTING-RIPng default-information only
  • ipv6 rip ROUTING-RIPng default-information default-only

Answer :ipv6 rip ROUTING-RIPng default-information only

Refer to the exhibit. Which are two methods to filter routes when Boundary router R2 is redistributing from router R3 EIGRP domain to R1 OSPF domain? (Choose two.)


Options are :

  • Policy base routing (PBR) with Access Control List or prefix list
  • Routing Protocol Access Control List or prefix list
  • Static routes
  • Route maps with Access Control List or prefix list
  • Distribute list with Access Control List or prefix list

Answer :Route maps with Access Control List or prefix list Distribute list with Access Control List or prefix list

100-105 Net Cert Interconnecting Cisco Networking Exam Set 6

Which OSPF router type will generate Link State Advertisement (LSA) Type 4 – OSPF ASBR summary LSA? (Choose the Best Answer)


Options are :

  • None, LSA Type 4 are legacy LSA and are not used anymore in OSPF
  • All OSPF routers
  • Area Border Router (ABR)
  • Internal Router
  • Designated Router (DR)
  • Backup Designated Router (BDR)
  • Autonomous System Boundary Router (ASBR)
  • Backbone Router

Answer :Area Border Router (ABR)


Refer to the exhibit. Which NTP access-group command will allow router CE-1 to serve NTP clients and allow router CE-1 to synchronize its time with NTP server?


Options are :

  • serve
  • serve-only
  • peer
  • query-only

Answer :peer


Refer to the exhibit. R1 has an adjacent RIPng neighbor R2. R2 has a LAN with no neighbors 2001:DB8:CAFE:3::/64.

R2 advertises this prefix to adjacent RIPng neighbor, R1.  What metric does R1 display for 2001:DB8:CAFE:3::/64?


Options are :

  • 2 hops
  • 3 hops
  • 1 hop
  • 0 hops

Answer :2 hops

Cisco Data Center Architecture Set 4

Which authentication algorithm type is supported by Cisco IOS IP Service Level Agreements (SLAs) to secure SLA control messages?


Options are :

  • Secure Hash Algorithm 256
  • Scrypt algorithm
  • Secure Hash Algorithm 1
  • Message-digest (MD5) algorithm
  • Vigenere cipher

Answer :Message-digest (MD5) algorithm

Which two of the following are correct Administrative distance for BGP.? (Choose two.) 


Options are :

  • iBGP, AS 200
  • iBGP, AS 170
  • eBGP, AS 100
  • iBGP, AS 100
  • iBGP, AS 120
  • eBGP, AS 90
  • eBGP, AS 100
  • eBGP, AS 20

Answer :iBGP, AS 200 eBGP, AS 20


Refer to the exhibit. A network engineer has configured IOS IP Service Level Agreements (SLAs). Which statement is true about configuration displayed in exhibit?


Options are :

  • A network engineer has configured primary and backup floating default static routes
  • Cisco IOS IP Service Level Agreements (SLAs) responder has to be configured for this to work
  • Return code will always be “OK”
  • There will be load balancing between two routes

Answer :A network engineer has configured primary and backup floating default static routes

200-105 Interconnecting Cisco Networking Devices Part Exam Set 4


Refer to the exhibit. Router R1 has been configured as SLAAC DHCPv6 server where it will allow router R2 to obtain prefix, prefix length and default gateway address as well as other DHCP attributes from router R1 but router R2 is required to configure itself with unique IPv6 address.

When router R2 sends a Router Solicitation (RS) message to router R1, what two flags will be returned in response from router R1 with Router Advertisement (RA) message?


Options are :

  • Managed Address Configuration flag (M flag) = 0, Other Configuration flag (O flag) = 1
  • Managed Address Configuration flag (M flag) = 1, Other Configuration flag (O flag) = 1
  • Managed Address Configuration flag (M flag) = 0, Other Configuration flag (O flag) = 0
  • Managed Address Configuration flag (M flag) = 2, Other Configuration flag (O flag) = 1

Answer :Managed Address Configuration flag (M flag) = 0, Other Configuration flag (O flag) = 1


Refer to the exhibit. EIGRP has been configured on all routers in the topology. Given the sample exhibited metric values, which router if any will be chosen as Feasible Successor by R1 to reach R5 LAN network 10.0.0.0/24, and what will be the feasible distance if the successor fails and R1 has to use Feasible Successor as new Successor?


Options are :

  • Feasible Successor R3 with feasibility distance of 30
  • Feasible Successor R4 with feasibility distance of 45
  • Feasible Successor R3 with feasibility distance of 35
  • Feasible Successor R4 with feasibility distance of 40
  • Feasible Successor R5 with feasibility distance of 5
  • Feasible Successor R2 with feasibility distance of 25
  • Feasible Successor R2 with feasibility distance of 30

Answer :Feasible Successor R3 with feasibility distance of 35


Refer to the exhibit. Router R1 has connection to router R2 and router R3, to reach networks on subnet 10.0.0.0/8 connected to R2 and R3, router R1 is preferring router R2 with address 172.16.12.2.

The network technician wants all traffic generated by PC-A to use next hop router R3 instead of router R2 and use Policy-Based Routing (PBR) to achieve this goal. The network technician has completed Policy-Based Routing (PBR) configuration

After running few tests the network administrator has found out that packets from PC-A are still using wrong next hop address of router R2 172.16.12.2. Which statement is true regarding this PBR configuration?


Options are :

  • Policy-Based Routing (PBR) has been applied in wrong interface
  • Default keyword should be removed from set statement
  • Wrong subnet mask has been configured on Access Control List
  • Route-map should have permit statement

Answer :Default keyword should be removed from set statement

200-125 CCNA Cisco Certified Network Associate Test Set 4


Refer to the exhibit. System administrator has run command show ip bgp, based on the output which three statements are true? (choose three.)


Options are :

  • Network 192.168.1.0 was injected with network command
  • Network 10.200.0.0/24 is learned through RIPv2
  • Next hop address of 0.0.0.0 means that these network are not reachable
  • Network 10.1.1.0/24 was injected on autonomous system 64511
  • For all networks starting with first octet of 10.x.x.x there is no Metric configured and if there is no metric those networks are not reachable
  • Network 192.168.1.0 was injected through redistribution
  • Network 10.200.5.0/24 was injected on autonomous system 64509
  • To get to Network 10.200.4.0/24 packet has to travel through autonomous systems 64511 64509

Answer :Network 192.168.1.0 was injected with network command Network 10.200.5.0/24 was injected on autonomous system 64509 To get to Network 10.200.4.0/24 packet has to travel through autonomous systems 64511 64509


Refer to the exhibit. Two routers, R1 and R2, are connected to the same Ethernet segment as host PC-A.

The IPv6 default gateway of PCA is the IPv6 address of router R1. PC-A sends a packet for Internet to its default gateway R1.

R1 examines its routing table and determines the next hop as router R2, on the same Ethernet segment as PCA. R1 forwards the packet out the same interface used to receive the packet from PC-A.

Which type of ICMPv6 message is sent by router R1 to PC-A, informing PC-A of a better route to Internet by way of R2?


Options are :

  • ICMPv6 Router Advertisement - Type Field Value 134
  • ICMPv6 Redirect Message - Type Field Value 137
  • ICMPv6 Neighbor Advertisement - Type Field Value 136
  • ICMPv6 Neighbor Solicitation - Type Field Value 135
  • ICMPv6 Router Solicitation - Type Field Value 133

Answer :ICMPv6 Redirect Message - Type Field Value 137

Which two statements are true about Easy Virtual Network (EVN)? (Choose two.)


Options are :

  • Easy Virtual Network (EVN) tags frames with 802.1q encapsulation
  • Easy Virtual Network (EVN) is LAN virtualization
  • Easy Virtual Network (EVN) is WAN virtualization
  • Easy Virtual Network (EVN) tags frames with ISL encapsulation
  • Easy Virtual Network (EVN) is enabled on switch only

Answer :Easy Virtual Network (EVN) tags frames with 802.1q encapsulation Easy Virtual Network (EVN) is LAN virtualization

200-125 CCNA Cisco Certified Network Associate Test Set 3


Refer to the exhibit. Based on the output from exhibit which two statements are true of the Point-to-Point operation?


Options are :

  • Two way handshake is achieved
  • Clear text authentication is achieved
  • Authentication is successful
  • Authentication is failing
  • Encrypted authentication is achieved

Answer :Authentication is successful Encrypted authentication is achieved

Which interface command should network technician use if it wants to enable Fast Switching on Cisco router?


Options are :

  • R1(config)#interface ethernet 0/0 R1(config-if)#ip route-cache cef
  • R1(config)#interface ethernet 0/0 R1(config-if)#no switchport
  • R1(config)#interface ethernet 0/0 R1(config-if)#no ip route-cache
  • R1(config)#interface ethernet 0/0 R1(config-if)#ip route-cache

Answer :R1(config)#interface ethernet 0/0 R1(config-if)#ip route-cache

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions