300-320 Designing Cisco Network Service Architectures Exam Set 1

A company requires real-time SAN replication between two remote locations. What is the standard path selection protocol for fabric routing?


Options are :

  • FCOE
  • FICON
  • SCSI
  • FSPF

Answer : FSPF

Cisco CCNP Route 300-101 Practice Tests Set 1

What WAN feature can prioritize real-time, IP-based applications when circuits may be saturated?


Options are :

  • CBWFQ
  • FRTS
  • LLQ
  • WFQ

Answer : LLQ

An organization is deploying a new load balancing environment to support sensitive applications. The security requirements include discrete IP segments used for VIPs and for the application hosts. What load balancer mode meets the requirements?


Options are :

  • transparent
  • router
  • bridge
  • pass-through

Answer : router

A network designer wants to improve security at the edge of the network and allow routing protocols to communicate without any additional configuration. What firewall mode meets the design requirements?


Options are :

  • transparent
  • context
  • zoned
  • routed

Answer : transparent

Cisco 210-060 Implement Collaboration Device Practice Exam Set 2

Which security mechanism can you implement to protect the OSPF information that a router receives?


Options are :

  • RADIUS authentication
  • privilege 15 credentials
  • cryptographic authentication
  • administrator username and password authentication

Answer : cryptographic authentication

A company's virtualization team wants to transfer control of network switching and policy management for VMware virtual servers to the networking team. What Cisco network virtualization solution should be implemented?


Options are :

  • Nexus distributed virtual switch
  • virtual network agent
  • Nexus unified fabric switch
  • Unified Computing System

Answer : Nexus distributed virtual switch

When is a first-hop redundancy protocol needed in the distribution layer?


Options are :

  • when preempt tuning of the default gateway is needed
  • when multiple vendor devices need to be supported
  • when a robust method of backing up the default gateway is needed
  • when the design implements Layer 2 between the access switch and the distribution blocks
  • when the design implements Layer 2 between the access and distribution blocks

Answer : when the design implements Layer 2 between the access and distribution blocks

300-320 Designing Cisco Network Service Architectures Exam Set 2

What are two of Cisco's best practices at the access layer to ensure rapid link transitions and VLAN consistency? (Choose two.)


Options are :

  • A,D
  • Utilize VTP in server/client mode
  • VLANs span entire network
  • Deploy MSTP
  • Deploy RPVST
  • Utilize VTP in transparent mode
  • Portfast applied on distribution uplinks

Answer : A,D

Which four Cisco proprietary Spanning Tree Protocol enhancements are supported with rapid per-VLAN Spanning-Tree plus? (Choose four.)


Options are :

  • PortFast
  • root guard
  • A,C,D,E
  • BPDU guard
  • BackboneFast
  • UplinkFast
  • loop guard

Answer : A,C,D,E

When a router has to make a rate transition from LAN to WAN, what type of congestion needs should be considered in the network design?


Options are :

  • RX-queue starvation
  • RX-queue saturation
  • RX-queue deferred
  • TX-queue saturation
  • TX-queue deferred
  • TX-queue starvation

Answer : TX-queue starvation

Cisco 210-060 Implement Collaboration Device Practice Exam Set 5

What network storage protocol uses a connection standard incompatible with shared 10Gb Ethernet physical connection?


Options are :

  • FC
  • SMB
  • CIFS
  • iSCSI
  • NFS

Answer : FC

A network engineer is designing a dual router, dual ISP solution and must prefer one ISP for inbound traffic over the other. Which two BGP attributes can be manipulated to accomplish this goal? (Choose two.)


Options are :

  • A,B
  • weight
  • AS path
  • MED
  • local preference
  • origin code

Answer : A,B

Which three statements about 802.1X are true? (Choose three.)


Options are :

  • It works only with wired devices.
  • B,C,D
  • By default, it allows devices that lack 802.1 support.
  • It can allow and deny port access based on device identity.
  • It is a Cisco proprietary standard.
  • It is an IEEE standard.
  • It can allow and deny port access based on user identity.

Answer : B,C,D

Cisco 210-060 Implement Collaboration Device Practice Exam Set 6

Which three authentication services are supported by Cisco NAC Appliance? (Choose three.)


Options are :

  • local
  • Kerberos
  • LDAP
  • TACACS+
  • RADIUS
  • SNMP
  • A,B,C

Answer : A,B,C

Which Cisco NAC Appliance component is optional?


Options are :

  • NAC Appliance Manager
  • NAC Appliance Server
  • NAC Appliance Policy Updates
  • NAC Appliance Agent

Answer : NAC Appliance Agent

Which option must be included in the design when implementing a triangle looped access layer design?


Options are :

  • Layer 2 links between access switches.
  • Single uplinks between access and distribution switches.
  • Layer 3 links between distribution switches.
  • A first hop redundancy protocol.

Answer : A first hop redundancy protocol.

Cisco CCNP Route 300-101 Practice Tests Set 1

VPLS uses which transport protocol for tunneling Ethernet frames?


Options are :

  • MPLS
  • GRE
  • L2TP
  • IPsec

Answer : MPLS

Which two features can you implement to control which networks are advertised by a BGP router? (Choose two.)


Options are :

  • crypto maps
  • router SNMP statements
  • policy maps
  • route maps
  • A,B
  • prefix lists

Answer : A,B

Which two protocol characteristics should be most considered when designing a single unified fabric for the Data Center? (Choose two.)


Options are :

  • FCoE requires gateway functionality to integrate into an existing Fibre Channel network
  • FCoE was initially developed to be used as a switch-to-switch protocol, while FCIP is primarily meant to be used as an access layer protocol to connect hosts and storage to a Fibre Channel SAN
  • A,C
  • iSCSI uses a special EtherType and an additional header containing additional control information
  • FCIP or FCoE allow for easier integration by using the Fibre Channel Protocol (FCP) and Fibre Channel framing
  • FCIP and iSCSI has higher overhead than FCoE owing to TCP/IP

Answer : A,C

Cisco CCNP Route 300-101 Practice Tests Set 4

Which router type injects external LSAs into the OSPF database using either other routing protocols or static routes?


Options are :

  • ASBR
  • backbone router
  • designated router
  • ABR
  • internal router

Answer : ASBR

Which two options improve BGP scalability in a large autonomous system? (Choose two.)


Options are :

  • route reflectors
  • confederations
  • communities
  • route redistribution
  • A,C

Answer : A,C

Which VRF component ensures control plane separation between the different Layer 3 VPNs?


Options are :

  • RIB
  • a subset of the router interfaces
  • routing protocol instance
  • FIB

Answer : routing protocol instance

Cisco CCNP Route 300-101 Practice Tests Set 3

Which three options are the three layers of the Cisco design in the data center architecture? (Choose three.)


Options are :

  • A,D,F
  • distribution layer
  • Layer 2 domain sizing
  • aggregation layer
  • core layer
  • access layer
  • service layer

Answer : A,D,F

Which Nexus feature enables you to support server connectivity with one topology and address requirement for both high availability and high bandwidth?


Options are :

  • EvPC
  • Stackwise
  • vPC
  • vPC+

Answer : EvPC

In a collapsed core design, which three benefits are provided by a second-generation Cisco MDS director? (Choose three.)


Options are :

  • a higher fan-out ratio
  • 100 percent port efficiency
  • B,C,D
  • fully redundant switches
  • higher latency and throughput than a core-edge design switch
  • all ISLs contained within a single chassis

Answer : B,C,D

200-125 Cisco Certified Network Associate (CCNA) Exam Set 1

Which option is used as a top-of-rack device that is managed by its parent device, providing ease of management?


Options are :

  • Cisco Nexus 7000
  • Cisco Nexus 9000
  • Cisco Nexus 5000
  • Cisco Nexus 2000

Answer : Cisco Nexus 2000

Which network virtualization plane is used to separate traffic forwarding tables?


Options are :

  • control
  • access
  • management
  • data

Answer : data

Which architecture provides a way to deliver end-to-end QoS as required by real-time voice and video business aplications?


Options are :

  • DiffServ
  • IntServ
  • LLQ
  • ToS
  • DSCP

Answer : IntServ

ICND1 100-105 Certification Practice Tests Set 1

Which QoS mechanism uses PHBs?


Options are :

  • IntServ
  • DiffServ
  • CoS
  • ToS

Answer : DiffServ

A company implemented VoIP in a campus network and now wants a consistent method to implement using AutoQoS. Which two parameters must be considered before AutoQoS is configured? (Choose two.)


Options are :

  • Traffic discovery must be performed manually.
  • Manual traffic analysis must be performed.
  • No service policy can be applied already.
  • A,D
  • CEF must be enabled.
  • AutoQoS is available only on routers.

Answer : A,D

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions