210-065 Implementing Cisco Video Network Devices Exam Set 2

On which of the following devices can you not issue the utils network ping command to test network connectivity?


Options are :

  • Cisco TelePresence Multipoint Switch
  • Cisco TelePresence Manager
  • Cisco Unified Communications Manager
  • Cisco TelePresence System Codec C60

Answer : Cisco TelePresence System Codec C60

210-065 Implementing Cisco Video Network Devices Exam Set 1

To which of the following locations would you navigate to configure a Cisco TelePresence VCS to register only aliases that match an entry in the Allow List?


Options are :

  • Registration > Deny List
  • Registration > Allow List
  • Protocols > SIP > Domains
  • Registration > Configuration

Answer : Registration > Configuration

Which of the following statements is correct regarding the default call protocol on a Cisco TelePresence SX20 Quick Set?


Options are :

  • You can modify the default call protocol by issuing the xConfiguration Conference 1 DefaultCallProtocol: H323 command.
  • You can modify the default call protocol by issuing the Conference 1 DefaultCall Protocol: H323 command.
  • You can modify the default call protocol only by using the GUI.
  • The default call protocol is always H.323 and cannot be modified.

Answer : You can modify the default call protocol by issuing the Conference 1 DefaultCall Protocol: H323 command.

Which of the following Cisco Jabber Video for TelePresence media streams uses only one UDP link?


Options are :

  • primary video
  • FECC
  • audio
  • BFCP

Answer : BFCP

Cisco Data Center Architecture Set 2

Which of the following event log error messages on a Cisco TelePresence VCS is most likely to require that you navigate to Registration > Allow List to correct the error?


Options are :

  • Authentication Failed
  • Security denial
  • Received from unauthenticated source
  • Unknown domain

Answer : Security denial

An office wall has an STC of 65. Which of the following statements is correct?


Options are :

  • The wall will not provide any sound absorption.
  • The wall will cause sound to be diminished by 65 dB.
  • The wall will cause sound to be diminished by 65 percent.
  • The wall needs to be 65 mm thick in order to provide inaudibility.

Answer : The wall will cause sound to be diminished by 65 dB.

Which of the following statements best describes Cisco MXE?


Options are :

  • It is an appliance that can convert and adapt media formats as well as perform media postproduction
  • It is an appliance or an application that can record and stream video calls and video conferences
  • It is an application that can manage, schedule, and publish digital media to displays
  • It is an application that provides a secure community for video sharing and collaboration.

Answer : It is an appliance that can convert and adapt media formats as well as perform media postproduction

300-101 Implementing Cisco IP Routing (ROUTE) Practice Exam Set 2

You issue the set upgrade display command. When will the display peripheral be updated?


Options are :

  • only after the show upgrade detail command is issued
  • only after the upgrade display command is issued
  • only after the utils upgrade peripherals command is issued
  • the next time the system restarts
  • immediately

Answer : the next time the system restarts

How many people can directly face the CTS TX1310 display when seated at a short racetrack table?


Options are :

  • only one
  • up to two
  • up to four
  • up to six

Answer : up to two

Which of the following terms does not describe an advantage of a Cisco IP-based video surveillance solution?


Options are :

  • proprietary
  • flexible
  • reliable
  • scalable
  • available

Answer : proprietary

400-101 CCIE Routing and Switching Written Practice Exam Set 6

Which of the following recommendations does Cisco make regarding the CTS50037?


Options are :

  • You should plug the system into a PDU.
  • You should place the display at least two meters from the user.
  • You should not place the codec in a cabinet
  • You must provide additional cooling for the system.

Answer : You should not place the codec in a cabinet

Which of the following statements is not correct regarding the lobby screen?


Options are :

  • Lobby screens are supported on the Cisco TelePresence Server 7010.
  • You can configure a different lobby message for each conference.
  • The lobby screen is optional.
  • The start and end times are displayed on the lobby screen if the conference is permanent.
  • The lobby message is optional.

Answer : The start and end times are displayed on the lobby screen if the conference is permanent.

How are participants displayed in Enhanced Continuous Presence view mode?


Options are :

  • The participant who is speaking is displayed prominently? the other participants are displayed in smaller panes.
  • Only the participant who is speaking is displayed.
  • A single participant is displayed regardless of whether the participant is speaking.
  • All participants are displayed equally.

Answer : The participant who is speaking is displayed prominently? the other participants are displayed in smaller panes.

400-101 CCIE Routing and Switching Written Practice Exam Set 8

You want to configure Port A on a Cisco TelePresence MCU 5300 with IP address 192.168.1.43, subnet mask 255.255.255.0, and default gateway 192.168.1.1. Which of the following commands or command sets should you issue?


Options are :

  • ip address 192.168.1.43 255.255.255.0 192.168.1.1
  • xConfiguration Network 1 IPv4 Address: "192.168.1.43" xConfiguration Network 1 IPv4 SubnetMask: "255.255.255.0" xConfiguration Network 1 IPv4 Gateway: "192.168.1.1"
  • static A 192.168.1.43 255.255.255.0 192.168.1.1
  • set network ip static 192.168.1.43 255.255.255.0 192.168.1.1

Answer : static A 192.168.1.43 255.255.255.0 192.168.1.1

Which of the following actions are you least likely to be able to perform during a call from a Cisco TelePresence SX20 Quick Set endpoint?


Options are :

  • changing the remote layout
  • changing the local layout
  • controlling the local camera
  • controlling the remote camera
  • controlling the remote volume

Answer : controlling the remote volume

Which of the following icons in Cisco Jabber indicates a user who is in a scheduled Outlook meeting?


Options are :

  • a green oval
  • a gray oval
  • a yellow oval
  • a red oval

Answer : a yellow oval

ICND2 200-105 Certification Practice Tests Set 1

You are attempting to recover the password on a Cisco TelePresence endpoint. You connect to the codec from your computer by using SSH. Which of the following strings should you use for the password?


Options are :

  • admin
  • pwrecovery
  • cisco
  • pwreset

Answer : pwreset

Which of the following will a SIP endpoint use as the SIP alias when the endpoint registers with a Cisco VCS?


Options are :

  • the H.323 alias
  • the registrar address
  • the endpoint's IP address
  • the AOR

Answer : the AOR

Which of the following methods can you use to initiate a rendezvous video conference on Cisco VCS? (Choose two.)


Options are :

  • MeetMe
  • preconfigured alias
  • MCU-IVR dial-in
  • Multiway
  • OBTP
  • automatic connect

Answer : preconfigured alias MCU-IVR dial-in

Cisco CCNP Route 300-101 Practice Tests Set 4

Which of the following options can you modify by selecting Configuration > Personalization from the web interface on a Cisco SX20 Quick Set? (Choose two.)


Options are :

  • the sign-in banner
  • the favorites list
  • the local layout
  • the ringtone
  • the wallpaper

Answer : the ringtone the wallpaper

Which table types can accommodate a maximum of four people directly facing the CTS TX1310 display? (Choose two.)


Options are :

  • long rectangle
  • short rectangle
  • short racetrack
  • long racetrack

Answer : short rectangle long racetrack

Which of the following color temperatures is recommended for Cisco TelePresence?


Options are :

  • 2900 K
  • 4000 K
  • 5400 K
  • 3200 K

Answer : 4000 K

Cisco 300-209 Implementing Secure Mobility Solutions Exam Set 7

Which of the following is a Cisco DMM module that is used to provide an on-screen program guide for IPTV?


Options are :

  • Cisco Digital Signs
  • Cisco Live Event
  • Cisco Media Experience Engine
  • Cisco Show and Share
  • Cisco Cast

Answer : Cisco Cast

After navigating to Configuration > Dial plan > Transforms on a Cisco TelePresence VCS, you see a transform of type Regex with the following pattern: ([^@]*) Which of the following will be matched by the transform?


Options are :

  • anything
  • anything that contains an @ symbol
  • anything that does not contain an @ symbol
  • nothing

Answer : anything that does not contain an @ symbol

You have activated the do-not-disturb feature on a Cisco SX20. Which of the following will appear on the Diagnostics > Troubleshooting page of the web interface?


Options are :

  • a green alert
  • no alert
  • a red alert
  • a yellow alert

Answer : a yellow alert

Cisco Data Center Architecture Set 5

Which of the following statements is true regarding ad-hoc conferences for endpoints without Cisco VCS?


Options are :

  • H.323 endpoints can neither initiate nor be added to an ad-hoc conference.
  • H.323 endpoints cannot initiate an ad-hoc conference but can be added to an ad hoc conference.
  • H.323 endpoints can initiate an ad-hoc conference but cannot be added to an ad hoc conference.
  • H.323 endpoints can initiate an ad-hoc conference and can be added to an ad-hoc conference.

Answer : H.323 endpoints cannot initiate an ad-hoc conference but can be added to an ad hoc conference.

Which of the following commands would you typically issue to configure SNMPv3 to poll the presentation display and camera on a Cisco TelePresence TX system?


Options are :

  • snmpwalk -n cts4 v3 -m ALL -u admin -A snmp-auth-password system-ip-address object-id
  • snmpwalk -n cts3 v3 -m ALL -u admin -A snmp-auth-password system-ip-address object-id
  • snmpwalk -n cts2 v3 -m ALL -u admin -A snmp-auth-password system-ip-address object-id
  • snmpwalk -n cts1 v3 -m ALL -u admin -A snmp-auth-password system-ip-address object-id

Answer : snmpwalk -n cts4 v3 -m ALL -u admin -A snmp-auth-password system-ip-address object-id

Which content sharing protocol is negotiated for point-to-point meetings in a Cisco TelePresence environment with H.323?


Options are :

  • H.239
  • BFCP
  • Auto-Collaborate
  • Switched Presentation

Answer : H.239

642-732 Conducting Cisco Unified Wireless Site Survey Exam Set 1

Which of the following cables does not need to be connected to a Cisco TelePresence PrecisionHD camera when the camera is connected to a C-series codec and to another Cisco TelePresence PrecisionHD camera?


Options are :

  • a video cable
  • a VISCA cable
  • a 12-volt direct current power cable
  • an RJ11-to-RJ45 cable

Answer : a 12-volt direct current power cable

Which of the following statements is correct regarding H.323 registrations on a Cisco VCS that is configured with the default settings?


Options are :

  • H.323 endpoints cannot register to a Cisco VCS by default.
  • H.323 endpoints can register manually by connecting to the IPv4 address of the Cisco VCS or automatically by sending out a Gatekeeper Discovery Request.
  • H.323 endpoints must register manually by connecting to the IPv4 address of the Cisco VCS.
  • H.323 endpoints must register automatically by sending out a Gatekeeper Discovery Request.

Answer : H.323 endpoints can register manually by connecting to the IPv4 address of the Cisco VCS or automatically by sending out a Gatekeeper Discovery Request.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions