200-105 Interconnecting Cisco Networking Devices Part Exam Set 4

Which command was used to generate the following output?

P 172.16.16.0/24, 1 successors, FD is 284244

via 172.16.250.2 (284244/17669856), Serial0/0

via 172.16.251.2 (12738176/27819002), Serial0/1

P 172.16.250.0/24, 1 successors, FD is 2248564

via Connected, Serial0/0

P 172.16.10.0/24 1 successors, FD is 284244

via 172.16.50.1 (284244/17669856), Serial1/0 


Options are :

  • debug ip eigrp
  • show ip eigrp topology
  • show eigrp topology
  • show ip route eigrp

Answer : show ip eigrp topology

Cisco 210-060 Implement Collaboration Device Practice Exam Set 3

What command disables 802.1x authentication on a port and permits traffic without authentication? 


Options are :

  • dot1x port-control force-unauthorized
  • dot1x port-control disable
  • dot1x port-control force-authorized
  • dot1x port-control auto

Answer : dot1x port-control force-authorized

Which of the following are characteristics of Enhanced Interior Gateway Routing Protocol (EIGRP)? (Choose all that apply.)

A. Requires a hierarchical physical topology

B. Does not require a hierarchical physical topology

C. Uses Diffusing Update Algorithm (DUAL) to provide loop prevention

D. Uses Bellman-Ford algorithm to provide loop prevention

E. Supports Message-Digest Algorithm 5 (MD5) authentication

F. Does not support Message-Digest Algorithm 5 (MD5) authentication

G. Can differentiate between internal and external routes

H. Uses a 32-bit metric 


Options are :

  • A,B,C,D,E
  • D,E,F,G,H
  • B,C,E,G,H
  • A,C,D,E,F

Answer : B,C,E,G,H

Which Cisco IOS command configures the clock rate to 64,000 bits per second on an interface?   


Options are :

  • clock-rate 64000
  • clock rate 64k
  • clock rate 64000
  • clock rate 64000

Answer : clock rate 64000

210-260 Implementing Cisco Network Security Practice Exam Set 2

Which protocol is used in redundant network topologies to avoid receiving multiple copies of the same frame?   


Options are :

  • Spanning Tree Protocol
  • Cisco Discovery Protocol
  • Routing Information Protocol
  • 802.1q

Answer : Spanning Tree Protocol

Examine the partial output from two adjacent routers: RTR78# show ip ospf Routing Process 201 with ID 192.0.2.1 VRF default Stateful High Availability enabled Graceful-restart is configured Grace period: 60 state: Inactive Last graceful restart exit status: None Supports only single TOS(TOS0) routes Supports opaque LSA This router is an autonomous system boundary Administrative distance 110 Reference Bandwidth is 40000 Mbps Initial SPF schedule delay 3000.000 msecs, minimum inter SPF delay of 2000.000 msecs, maximum inter SPF delay of 4000.000 msecs Initial LSA generation delay 3000.000 msecs, RTR79# show ip ospf Routing Process 202 with ID 192.0.2.1 VRF default Stateful High Availability enabled Graceful-restart is configured Grace period: 60 state: Inactive Last graceful restart exit status: None Supports only single TOS(TOS0) routes Supports opaque LSA This router is an autonomous system boundary Administrative distance 110 Reference Bandwidth is 30000 Mbps  Initial SPF schedule delay 3000.000 msecs, minimum inter SPF delay of 2000.000 msecs, maximum inter SPF delay of 4000.000 msecs Initial LSA generation delay 3000.000 msecs,

Which of the following statements describes why the two routers are NOT forming an OSPF neighbor adjacency? 


Options are :

  • The process IDs do not match
  • The reference bandwidth does not match
  • The router IDs are misconfigured
  • The distance is misconfigured

Answer : The router IDs are misconfigured

You instructed your assistant to add a new router to the network. The routers in your network run OSPF. The existing router, OldRouter, is configured as follows: router ospf 1 network 192.168.5.0 0.0.0.255 area 0 network 192.168.10.0 0.0.0.255 area 0 The OldRouter interface that connects to NewRouter is 192.168.5.3/24. Your assistant shows you the configuration that will be implemented: newrouter(config)# router ospf 1 newrouter(config-router)# network 192.168.5.0 255.255.255.0 area 0

What is wrong with this configuration? 


Options are :

  • The wildcard mask is incorrectly configured.
  • The process ID number is incorrectly configured
  • The network statement is incorrectly configured.
  • The area ID is incorrectly configured.

Answer : The wildcard mask is incorrectly configured.

200-105 Interconnecting Cisco Networking Devices Part Exam Set 5

Which Enhanced Interior Gateway Routing Protocol (EIGRP) packet is NOT sent reliably over the network?   


Options are :

  • Reply
  • Acknowledgement
  • Query
  • Update

Answer : Acknowledgement

A new trainee is setting up a router in a test lab, and he asks you to describe the use of the connector marked BRI on the router. Which is a correct use for this connecter? 


Options are :

  • A WAN interface for an ISDN connection
  • A WAN interface for a T1 connection
  • An interface to connect a console cable
  • A LAN interface to connect to a switch

Answer : A WAN interface for an ISDN connection

What will an EIGRP router do if the successor route fails and there is no feasible successor? 


Options are :

  • EIGRP will query neighboring routers until a new successor route is determined.
  • EIGRP will mark the route as passive until a new successor route is determined.
  • EIGRP will redistribute routes into RIP or OSPF.
  • EIGRP will forward traffic to the neighbor with the lowest administrative distance

Answer : EIGRP will query neighboring routers until a new successor route is determined.

ICND1 100-105 Certification Practice Tests Set 2

Which of the following excerpts from the output of the show ip eigrp topology command include EIGRP learned routes or pairs of routes that will be included in the routing table? (For excerpts that include multiple routes, do not include the entry unless BOTH routes will be included in the routing table.)   


Options are :

  • P 172.16.10.0/24 2 successors, FD is 284244via 172.16.50.1 (284244/17669856), Serial1/0via 172.16.60.1 (284244/17669856), Serial1/1
  • P 172.16.250.0/24, 1 successors, FD is 2248564via Connected, Serial0/0
  • P 172.16.16.0/24, 1 successors, FD is 284244via 172.16.250.2 (284244/17669856), Serial0/0via 172.16.251.2 (12738176/27819002), Serial0/1
  • P 172.16.60.0/24, 1 successors, FD is 2248564via Connected, Serial1/1

Answer : P 172.16.10.0/24 2 successors, FD is 284244via 172.16.50.1 (284244/17669856), Serial1/0via 172.16.60.1 (284244/17669856), Serial1/1

You are configuring a serial link between a Cisco router and a router produced by another vendor. What would be the advantages of using Point to Point Protocol (PPP) over High Level Data Link Control (HDLC) in this scenario?   


Options are :

  • PPP performs error checking.
  • HDLC has a proprietary "type" field that may be incompatible with equipment from other vendors.
  • PPP is faster
  • HDLC is not available on non-Cisco routers.

Answer : HDLC has a proprietary "type" field that may be incompatible with equipment from other vendors.

Enhanced Interior Gateway Routing Protocol (EIGRP) uses which algorithm to select the best path to the destination? 


Options are :

  • Diffusing Update Algorithm (DUAL)
  • Shortest Path First (SPF) algorithm
  • Dijkstra algorithm
  • Bellman-Ford algorithm

Answer : Diffusing Update Algorithm (DUAL)

400-101 CCIE Routing and Switching Written Practice Exam Set 12

Which of the following statements is NOT true with respect to using SPAN for troubleshooting? 


Options are :

  • By default both received and transmitted traffic is captured
  • The destination port can receive both normal traffic and monitored traffic
  • In the command monitor session 55 source interface Fa0/1, the value 55 is the session number
  • The source port cannot also be a destination port

Answer : The destination port can receive both normal traffic and monitored traffic

What command produced the following as a part of its output?

1 14.0.0.2 4 msec 4 msec 4 msec

2 63.0.0.3 20 msec 16 msec 16 msec

3 33.0.0.4 16 msec * 16 msec 


Options are :

  • Tracert
  • Extended ping
  • Ping
  • Traceroute

Answer : Traceroute

You are configuring an authenticated connection between two routers named Tacoma and Lansing. The connection on the Lansing end is correctly set up with a password of keypass. You are directing an assistant to configure the name and password on Tacoma. Which of the following commands would be correct to complete this authenticated connection? 


Options are :

  • username Tacoma keypass password
  • username Tacoma password keypass
  • username Lansing keypass password
  • username Lansing password keypass

Answer : username Lansing password keypass

200-125 CCNA Cisco Certified Network Associate Test Set 3

Which protocol is responsible for negotiating and maintaining Point-to-Point Protocol (PPP) connections? 


Options are :

  • LCP
  • NCP
  • ISDN
  • BRI

Answer : LCP

You have two routers in your OSPF area 0. Router 1 is connected to Router 2 via its Serial 1 interface, and to your ISP via the Serial 0 interface. Router 1 is an ASBR. After your assistant configures a default route on Router 1, you discover that whenever either router receives packets destined for networks that are not in the routing tables, it causes traffic loops between the two routers. To troubleshoot, you execute the show run command on Router 1. Part of the output is shown below:

IP route 0.0.0.0 0.0.0.0 serial 1 Router ospf 1 Network 192.168.5.0 0.0.0.255 area 0 Default-information originate

Which command or set of commands should you execute on Router 1 to stop the looping traffic while maintaining Router 2's ability to send traffic to the Internet? 


Options are :

  • Execute the no network 192.168.5.0 area 0 command and then execute the network 192.168.5.0 255.255.255.0 area 0 command
  • Execute the no default-information originate command.
  • Execute the no ip route 0.0.0.0 0.0.0.0 serial 1 command and then execute the ip route 0.0.0.0 0.0.0.0 serial 0 command.
  • Execute the default-information originate always command.

Answer : Execute the no ip route 0.0.0.0 0.0.0.0 serial 1 command and then execute the ip route 0.0.0.0 0.0.0.0 serial 0 command.

Which of the following is NOT a benefit of cloud computing to cloud users?   


Options are :

  • Highly available, horizontally scaled applications
  • Centralized appearance of resources
  • Cost reduction from standardization and automation
  • On-demand self-service resources provisioning

Answer : Cost reduction from standardization and automation

210-260 Implementing Cisco Network Security Practice Exam Set 8

Which WAN switching technology is used by Asynchronous Transfer Mode (ATM)? 


Options are :

  • packet switching
  • cell-switching
  • virtual switching
  • circuit-switching

Answer : cell-switching

Which of the following commands configures an SNMP host to authenticate a user by username and send clear text notifications, the receipt of which will be acknowledged by the receiver? 


Options are :

  • Router(config)# snmp-server host 192.168.5.5 informs version 3 noauth public
  • Router(config)# snmp-server host 192.168.5.5 traps version 3 auth public
  • Router(config)# snmp-server host 192.168.5.5 informs version 2c public
  • None
  • Router(config)# snmp-server host 192.168.5.5 informs version 3 authpriv public

Answer : Router(config)# snmp-server host 192.168.5.5 informs version 3 noauth public

The following is a partial output of the show interfaces command: Serial 0 is up, line protocol is down Hardware is MCI Ethernet, address is 0000.0c00.750c (bia 0000.0c00.750c) Internet address is 134.108.28.8, subnet mask is 255.255.255.0  MTU 1500 bytes, BW 10000 Kbit, DLY 100000 usec, rely 255/255, load 1/255 Encapsulation ARPA, loopback not set, keepalive set (10 sec) ARP type: ARPA, ARP Timeout 4:00:00 Last input 0:00:00, output 0:00:00, output hang never Last clearing of "show interface" counters 0:00:00 Output queue 0/40, 0 drops; input queue 0/75, 0 drops Five minute input rate 0 bits/sec, 0 packets/sec Five minute output rate 2000 bits/sec, 4 packets/sec 1127576 packets input, 447251251 bytes, 0 no buffer Received 354125 broadcasts, 0 runts, 0 giants, 57186* throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 5332142 packets output, 496316039 bytes, 0 underruns 0 output errors, 432 collisions, 0 interface resets, 0 restarts <<output omitted>>

What does the Serial 0 is up, line protocol is down statement signify in the output? (Choose all that apply.)

A. the shutdown interface command is present in the router configuration

B. a cable is unplugged

C. the interface is displaying normal operation

D. there are no problems with physical connectivity

E. there is a configuration problem in the local or remote router 


Options are :

  • D,E
  • A,B
  • A,C
  • C,D

Answer : D,E

210-260 Implementing Cisco Network Security Practice Exam Set 4

Which of the following is NOT a true statement regarding Virtual Private Networks (VPNs)? 


Options are :

  • A VPN is a method of securing private data over public networks
  • IPsec provides packet-level encryption
  • IPsec is a method for providing security over VPN
  • Frame Relay is a Layer 3 VPN technology

Answer : Frame Relay is a Layer 3 VPN technology

Which command is NOT mandatory for inclusion in a plan to implement IP Service Level Agreements (SLAs) to monitor IP connections and traffic? 


Options are :

  • ip sla
  • ip sla schedule
  • icmp-echo
  • ip sla reset

Answer : ip sla reset

Which of the following technologies allows a switch port to immediately transition to a forwarding state?   


Options are :

  • CDP
  • VTP
  • Rapid STP
  • PortFast

Answer : PortFast

200-125 Cisco Certified Network Associate Practice Exam Set 11

Which of the following are classless routing protocols? (Choose four.)

A. Open Shortest Path First (OSPF)

B. Enhanced Interior Gateway Routing Protocol (EIGRP)

C. Interior Gateway Routing Protocol (IGRP)

D. Routing Information Protocol version 1 (RIPv1)

E. Border Gateway Protocol (BGP)

F. Routing Information Protocol version 2 (RIPv2) 


Options are :

  • A,C,D,F
  • A,C,D,E
  • C,D,E,F
  • A,B,E,F

Answer : A,B,E,F

Which of the following statements is NOT true of Cisco ACI?   


Options are :

  • It decreases network visibility.
  • It provides policy driven automation support.
  • It uses Cisco APIC as the central management system.
  • It is a comprehensive SDN architecture.

Answer : It decreases network visibility.

Your network consists of one HSRP group of six routers. All of the routers are functioning properly. The network has been stable for several days. In which HSRP state are most of the routers? 


Options are :

  • Standby
  • Active
  • Learn
  • Listen

Answer : Listen

200-310 Designing for Cisco Inter network Solutions Exam Set 3

You run the following command: switch# show ip interface brief What information is displayed? 


Options are :

  • The IP addresses for the interface and the routing protocol advertising the network
  • A summary of the IP addresses on the interface and the interface's status
  • The IP packet statistics for the interfaces
  • A summary of the IP addresses and subnet mask on the interface

Answer : A summary of the IP addresses on the interface and the interface's status

How is the designated router (DR) determined by OSPF on a multi-access network segment? 


Options are :

  • The lowest interface priority, then the highest OSPF process ID
  • The highest interface priority, then the highest RID
  • The highest interface priority, then the highest OSPF process ID
  • The lowest interface priority, then the highest RID

Answer : The highest interface priority, then the highest RID

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions