100-105 Net Cert Interconnecting Cisco Networking Exam Set 3

A host is powered up, but the connected switch port does not turn amber or green. Which of the following methods would you use to troubleshoot the situation? (Choose three. Each answer is a complete solution.)


Options are :

  • Ensure that the cable is straight-through.
  • Reseat the cable.
  • Ensure that the cable is crossover.
  • Ensure the switch is powered up
  • Reinstall Windows on the workstation.

Answer : Ensure that the cable is straight-through. Reseat the cable. Ensure the switch is powered up

Which type of switching process requires a switch to wait for the entire frame to be received before forwarding it to a destination port?


Options are :

  • cut-through
  • frame-forward
  • fragment free
  • store and forward

Answer : store and forward

200-125 CCNA Cisco Certified Network Associate Test Set 2

Router-A# show running-configuration s0/0 interface serial0/0 description connected to router A IP address 10.10.10.1 255.0.0.0 encapsulation frame-relay shutdown clock rate 64000 Based on the interface configuration provided, which two statements are TRUE? (Choose two.)


Options are :

  • The router's serial interface connects using the point-to-point protocol.
  • The router's serial interface is administratively down.
  • The router's serial interface is connected using a DCE cable
  • The router's serial interface is connected using a DTE cable.

Answer : The router's serial interface is administratively down. The router's serial interface is connected using a DCE cable

Which Cisco IOS command is used to view the information about the interfaces on which Cisco Discovery Protocol (CDP) is enabled?


Options are :

  • show cdp
  • show interfaces
  • show cdp interface
  • show cdp interfaces

Answer : show cdp interface

You are the network administrator for your company and have configured Cisco Discovery Protocol (CDP) in your network. You recently noticed that when devices send large numbers of CDP neighbor announcements, some devices are crashing. You decide to disable CDP on the router. Which command should you use to achieve the objective?


Options are :

  • no cdp enable
  • no cdp run
  • set cdp disable
  • no cdpadvertise-v2

Answer : no cdp run

Cisco 100-101 Interconnecting Cisco Networking Devices Exam Set 1

You are the network administrator for your company and have configured Cisco Discovery Protocol (CDP) in your network. You recently noticed that when devices send large numbers of CDP neighbor announcements, some devices are crashing. You decide to disable CDP on the router. Which command should you use to achieve the objective?


Options are :

  • no cdp run
  • set cdp disable
  • no cdp advertise-v2
  • no cdp enable

Answer : no cdp run

You are the senior network administrator for a large corporation. Some new trainees have recently joined the network security team. You are educating them about denial-of-service (DoS) attacks and the risks posed to a network by such attacks. Which three are risks that a DoS attack poses to a network? (Choose three.)


Options are :

  • Spread of viruses
  • Information theft
  • Revenue loss
  • Downtime and productivity loss

Answer : Information theft Revenue loss Downtime and productivity loss

Which of the following commands is used to verify the link-local, global unicast, and multicast addresses of an IPv6 router?


Options are :

  • show ipv6 route
  • show ipv6 protocols
  • show ipv6 interface
  • show ipv6 neighbors (only link-local addresses)

Answer : show ipv6 interface

200-105 Interconnecting Cisco Networking Devices Part Exam Set 3

Which of the following statements are TRUE regarding Cisco access lists? (Choose two.)


Options are :

  • When a line is added to an existing access list, it is inserted at the beginning of the access list.
  • Extended access lists are used to filter protocol-specific packets.
  • You must specify a deny statement at the end of each access list to filter unwanted traffic.
  • In an inbound access list, packets are filtered before they exit an interface.
  • In an inbound access list, packets are filtered as they enter an interface

Answer : Extended access lists are used to filter protocol-specific packets. In an inbound access list, packets are filtered as they enter an interface

Which Cisco IOS command disables Cisco Discovery Protocol Version 2 (CDPv2) advertisements?


Options are :

  • no cdp enable
  • no cdp v2-advertise
  • no cdp advertise-v2
  • no cdp run

Answer : no cdp advertise-v2

Which Cisco IOS Cisco Discovery Protocol (CDP) command displays the IP address of the directly connected Cisco devices?


Options are :

  • show cdp
  • show cdp traffic
  • show cdp devices
  • show cdp neighbors detail

Answer : show cdp neighbors detail

300-320 Designing Cisco Network Service Architectures Exam Set 5

Which of the following statements are true of Class C IP addresses?


Options are :

  • The decimal values of the first octet can range from 192to 223
  • The first octet represents the entire network portion of the address
  • The first three octets represent the entire network portion of the address
  • The value of the first binary place in the first octet must be 0
  • The decimal values of the first octet can range from 1 to 126
  • The value of the first two binary places in the first octet must be 11

Answer : The decimal values of the first octet can range from 192to 223 The first three octets represent the entire network portion of the address The value of the first two binary places in the first octet must be 11

Your assistant just entered the following command on a router: R67(config)#logging trap 0 Which of the following levels will be trapped? (Choose all that apply.)


Options are :

  • Alert
  • Critical
  • Emergency
  • Error

Answer : Emergency

During the process of connecting four switches to the central router and implementing VLANS between the devices, it becomes apparent that there was a misunderstanding about which encapsulation protocol to use on the links between the switches and the router. If there is mismatch between the encapsulation types used on the router interface and the type used on the connected switch port, what will be the result?


Options are :

  • The relevant switch ports will be green and flashing.
  • The relevant switch ports will be amber.
  • The relevant switch ports will be neither green nor amber
  • The relevant switch ports will be green.

Answer : The relevant switch ports will be neither green nor amber

200-105 Interconnecting Cisco Networking Devices Part Exam Set 4

Which trunk encapsulation defines one VLAN on each trunk as a native VLAN?


Options are :

  • auto
  • ISL
  • IEEE 802.1q
  • IEEE 802.11a

Answer : IEEE 802.1q

How many collision domains are in a LAN with four hubs and two bridges that are connected directly to each other, as shown in the following figure? (Click the Exhibit(s) button.)


Options are :

  • fourteen
  • four
  • six
  • five

Answer : five

A packet is received with a destination IP address of 10.2.16.10. What would the next hop IP address be for this packet? Router# show ip route <> D 10.0.0.0 /8 [90/2172515] via 192.168.1.10, 00:00:44, Serial0/0 D 10.1.0.0 /16 [90/2144425] via 192.168.1.10, 00:01:03, Serial0/0 C 192.168.1.0 is directly connected, Serial0/0 C 192.168.4.0 is directly connected, Serial0/1 D 10.2.16.0 /24 [90/2162425] via 192.168.4.2, 00:00:25, Serial0/1 C 192.168.10.0 is directly connected, Serial1/0 D 10.2.32.0 /24 [90/2172425] via 192.168.10.254, 00:00:21, Serial1/0 90/2172425] via 192.168.1.10, 00:03:33:, Serial0/1


Options are :

  • 192.168.1.10
  • 192.168.10.254
  • None; the packet will be dropped.
  • 192.168.4.2

Answer : 192.168.4.2

Cisco Data Center Architecture Set 5

Which of the following NAT terms refers to a registered address that represents an inside host to an outside network?


Options are :

  • outside local
  • inside local
  • outside global
  • inside global

Answer : inside global

In what order are the lines of an access list read when an access list is applied to a router interface? (Choose all that apply.)


Options are :

  • Bottom to top, if it is an extended access list
  • Bottom to top, if it is a standard access list
  • Top to bottom it is an extended access list
  • Top to bottom if it is a standard access list

Answer : Top to bottom it is an extended access list Top to bottom if it is a standard access list

esterday one of your associates made some changes to the syslog configuration on the router R69. Today, while working on the router you received this syslog message: 000019: %SYS-5-CONFIG_I: Configured from console by vty2 (10.34.195.36) Based on this output, which of the following commands did the associate execute?


Options are :

  • service timestamps log
  • logging console 4
  • service sequence-numbers
  • service timestamps log datetime msec

Answer : service sequence-numbers

200-310 Designing for Cisco Inter network Solutions Exam Set 5

You are the network administrator for your company. You have been assigned the task of configuring an appropriate IP addressing scheme in the network. Assuming that the network address is 192.16.100.0/28, what will be the number of hosts per network in this scenario?


Options are :

  • 30
  • 14
  • 6
  • 2

Answer : 14

200-310 Designing for Cisco Inter network Solutions Exam Set 3

What is the purpose of frame tagging in Virtual LAN (VLAN) configurations?


Options are :

  • frame identification over access links
  • encryption of network packets
  • inter-VLAN routing
  • frame identification over trunk links

Answer : frame identification over trunk links

Which of the following is the correct command to define a default route using a gateway address of 172.16.0.254?


Options are :

  • default-gateway 172.16.0.254
  • ip route default 172.16.0.254
  • ip default-route 172.16.0.254 255.255.0.0
  • ip route 0.0.0.0 0.0.0.0 172.16.0.254

Answer : ip route 0.0.0.0 0.0.0.0 172.16.0.254

File Transfer Protocol (FTP) and Simple Mail Transfer Protocol (SMTP) work at which layer in the Open Systems Interconnection (OSI) model?


Options are :

  • the Network layer
  • the Presentation layer
  • the Application layer
  • the Session layer

Answer : the Application layer

642-732 Conducting Cisco Unified Wireless Site Survey Exam Set 1

Which Cisco IOS command will enable a switch to copy the configuration from NVRAM to its RAM?


Options are :

  • copy running-config flashC copy startup-config flash
  • copy running-config startup config
  • copy tftp flash
  • copystartup-config running-config

Answer : copy running-config startup config

Which is NOT a valid range for private IP addresses?


Options are :

  • 172.16.0.0 - 172.31.255.255
  • 192.255.255.255-193.0.0.0
  • 10.0.0.0 - 10.255.255.255
  • 192.168.0.0 - 192.168.255.255

Answer : 192.255.255.255-193.0.0.0

Which of the following commands helps you determine the Layer 1 and Layer 2 up/down status of a Cisco interface?


Options are :

  • show running-config
  • show controllers
  • show interfaces trunk
  • show interfaces

Answer : show interfaces

200-105 Inter connecting Cisco Networking Devices Exam Set 3

Which Cisco Internetwork Operating System (IOS) command is used to encrypt passwords on Cisco routers?


Options are :

  • enable password
  • service encryption-password
  • service password-encryption
  • password secure

Answer : service password-encryption

Which of the following fields are in a Transmission Control Protocol (TCP) header? (Choose three.)


Options are :

  • Type-of-Service
  • Length
  • Sequence Number
  • Window
  • Data Offset

Answer : Sequence Number Window Data Offset

What IOS command produced the following output? Vlan Mac Address Type Ports ---- ------------ ------- ----- 1 0040.63d8.ba0a DYNAMIC Fa0/1 1 0004.274c.9ca0 DYNAMIC Fa0/3 1 0040.63d8.bab8 DYNAMIC Fa0/10 1 000f.1fd3.d85a DYNAMIC Fa0/7


Options are :

  • show ip interface
  • show interface mac
  • show mac
  • show mac-address-table

Answer : show mac-address-table

200-105 Interconnecting Cisco Networking Devices Part Exam Set 2

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions