Blue Prism Certified Developer - Mock Test Set 3

What will be the output of the below scenario in case there is an exception in the launch action?


Options are :

  • The Exception will be carry forwarded
  • It will get completed
  • It will run in an infinite look
  • None of these

Answer :It will run in an infinite look

Blue Prism Developer Certification AD01- Exam Dumps Set 7

An item is picked from a Blue Prism work queue using the Get Next item action of the Internal-Work Queues business object. It is not marked as Complete or as an Exception. A second item is then picked from the same queue by another process. What will happen to the first item picked from the queue?


Options are :

  • It will be automatically marked as an exception
  • It will be automatically marked as complete
  • It will be automatically marked as pending
  • Nothing will happen to the first item

Answer :Nothing will happen to the first item

The initial value of the Data Item is given as Zero, In the Calculation stage the expression is "Data" and the output is stored in the same data item. What will be the output if you run the below scenario?


Options are :

  • Zero
  • 0
  • Data
  • Run time error

Answer :Data

What will be the output of the below scenario in case there is an exception in the launch stage followed by the Exception in Attach stage?



Options are :

  • It will terminate
  • It will be re-thrown
  • It will run in an infinite loop
  • None of these

Answer :It will run in an infinite loop

BluePrism Developer Certification (AD01) - Practice Tests Set 1

Which of the following correctly describes the use of exception function?


Options are :

  • Exception functions must only be used after a Resume stage
  • Exception functions must only be used in Recovery mode
  • Exception functions must only be used within a recovery block
  • Exceptions must only be used in the Mark exception action of the Internal-Work queues business object

Answer :Exception functions must only be used in Recovery mode

What will be the output of the below scenario in case there is an exception in the launch action followed by the Exception in Calculation stage Exception Detail?


Options are :

  • It will run in an infinite loop
  • It will terminate
  • It will be re-thrown
  • None of these

Answer :It will terminate

The time in the wait stage is given as 100seconds, what will happen if the required screen appears at 93seconds?


Options are :

  • It will Click and End
  • It will throw an inbuilt exception
  • It will throw an exception specified above
  • None of these

Answer :It will Click and End

Blue Prism Developer Certification AD01- Exam Dumps Set 2

Hi,

Congratulation for successfully practice all the questions in this course! Now you are ready to go for AD01 certification exam however, we suggest you to review some of the Blue Prism study materials which are very useful for exam preparation as well in Project too.

Please find in below link of study materials;

https://drive.google.com/drive/folders/14JiKxu62S9zJy8x3fK6S_tCd_172o5Ha?usp=sharing

Thanks and Warm Regards,

BINKIs Dev


Options are :

  • Wish you all the best for Exam!

Answer :Wish you all the best for Exam!

The Work Queue "Customer Onboarding" has a number of Pending Items which may be tagged as "Domestic", "Retail" or Business". There is also a tag for the 8 digit product code formatted as "Product Code: {product code}" e.g. Product Code: CA123456.

What is the correct configuration to get the next item from the queue that:

> Isn't applying for a loan product i.e. Product Code doesn't begin with "LN" And

> Is a domestic customer


Options are :

  • Configure "Domestic; -Product Code: LN*" in the Tag Filter parameter
  • Configure "Domestic and Product Code: <> LN?" in the Tag Filter parameter
  • Configure "Domestic; -Product Code: LN?" in the Tag Filter parameter
  • Configure "Domestic + [Product Code] <> LN*" in the Tag Filer parameter

Answer :Configure "Domestic; -Product Code: LN*" in the Tag Filter parameter

Blue Prism Developer Certification AD01- Exam Dumps Set 6

Consider the following process flow:

Decision "A" properties are:

40 + 10 * 30 = 150


Decision "B" properties are:

Sqrt (100 - 19) = 9


Decision "C" properties are:

3 ^ 4 = 27


What will happen when the process runs?


Options are :

  • The flow will pass through calculation stage "A"
  • The flow will pass through calculation stage "B"
  • The flow will pass through calculation stage "C"
  • An exception will be thrown

Answer :The flow will pass through calculation stage "B"

Consider the following process flow:

Decision "A" properties are:

Mid("United Kingdom", 8, 3) = "ing"


Decision "B" properties are:

Left("UK", 1) AND Left("USA") = "U"


Decision "C" properties are:

Len("United States") < Len("United Kingdom")


What will happen when the process runs?


Options are :

  • The flow will pass through calculation stage "A"
  • The flow will pass through calculation stage "B"
  • The flow will pass through calculation stage "C"
  • An exception will be thrown

Answer :An exception will be thrown

The Work Queue "Customer Onboarding" has a number of Pending Items which may be tagged as "Domestic", "Retail" or "Business".

What is the correct configuration to get the next item from the queue that is tagged either "Retail" or "Business"?


Options are :

  • Configure "-Domestic" in the Tag Filter parameter
  • Configure "Retail or Business" in the Tag Filter parameter
  • Configure "Retail;Business" in the Tag Filter parameter
  • Configure "Retail+Business' in the Tag Filter parameter

Answer :Configure "-Domestic" in the Tag Filter parameter

Blue Prism Developer Certification AD01- Exam Dumps Set 2

How many End Stages can a sub-page in a Process have?


Options are :

  • 0
  • 1
  • 2
  • Any Number of End Stage

Answer :Any Number of End Stage

Which of the following Stages can be found in Process Studio but NOT in Object Studio?



Options are :

  • Option A)
  • Option B)
  • Option C)
  • Option D)

Answer :Option C)

When mapping the Training application, the User Name Field has been spied, but on highlighting the following situation is encountered:

Which of the following attributes would you use to help obtain a unique match?


Options are :

  • Ordinal
  • Parent Window Text
  • Height
  • Control ID

Answer :Ordinal

Blue Prism Developer Certification AD01- Exam Dumps Set 5

You identify an element in Application Modeller and it highlights uniquely and can be used in your object flow diagram. The next day you find that Blue Prism cannot no longer identify the same element, your object flow is giving you ‘Element not found' exceptions.

Which of the following statements is true?


Options are :

  • This must be an environment issue. The Blue Prism environment must be consistent and persistent, and an element that worked one day and does not work the next day suggests the environment is changeable. The IT team supporting the environment needs to be contacted to fix the problem.
  • The Blue Prism product support team should be contacted to report the issue. This signifies an inconsistency in how the Blue Prism product is working which needs to be fixed.
  • This suggests that Best Practice exception handling has not been implemented in the object. A retry loop around the object stages that are using the element will probably fix the problem.
  • It is common for consistency issues to be found during configuration/development testing. The most likely cause is that an attribute has been selected for the element that is changeable, such as a window title with a date, or a URL. The developer needs to ensure that any changeable attributes are unticked.

Answer :It is common for consistency issues to be found during configuration/development testing. The most likely cause is that an attribute has been selected for the element that is changeable, such as a window title with a date, or a URL. The developer needs to ensure that any changeable attributes are unticked.

Consider the following flow in an object:

Which of these statements is true?


Options are :

  • The flow shown in the diagram is correct, the wait stages are all adding a high level of robustness to the action
  • The wait stages after read and write stages should be removed they are not required and are slowing the flow down
  • The wait stages after read stages should be removed, the wait stages after write stages should be left because the application will have been changed
  • Only the first wait stage in this flow is required, all the other wait stages should be removed.

Answer :The wait stages after read and write stages should be removed they are not required and are slowing the flow down

When entering an option within the Training Order system the relevant option number is entered into the Option number field as below. The Option number input field has been spied in Blue Prism:

The following attribute set has been returned by Application Modeller:

Which Attribute can be un-ticked to ensure consistent visibility of the element to Blue Prism?


Options are :

  • Window Text
  • Visible
  • Screen Visible
  • Class Name

Answer :Window Text

Blue Prism Developer Certification AD01- Exam Dumps Set 3

What is the syntax for using a collection field in an expression?


Options are :

  • Like this [MyCollection[MyField]]
  • Like this MyCollection(MyField)
  • Like this MyCollection[MyField]
  • Like this [MyCollection.MyField]
  • Like this MyCollection.MyField

Answer :Like this [MyCollection.MyField]

A business object needs to use a Global Send Keys stage to populate the User Name field in an application entitled Workflow. The application is in focus and cursor is in the User Name field. In order to configure the Global Send Keys, which element needs to be placed in the Element field of the stage below?


Options are :

  • Workflow
  • Main Window
  • Login Window
  • Username (Edit Field)

Answer :Workflow

How can a session variable value be updated when a process is running?


Options are :

  • By using the Internal – Session Variables business object.
  • By pausing the Session Variables work queue.
  • By updating the value in Control Room.
  • By updating the value in Credential Manager.

Answer :By updating the value in Control Room.

BluePrism Developer Certification (AD01) - Practice Tests Set 2

As per the Blue Prism best practice guide, what is the best way to manage target Application's Credentials in Blue Prism?


Options are :

  • Should be stored in data item with datatype "Password"
  • Should be stored in Session variable
  • Should be stored in Credential Manger
  • Should be stored as Environmental variables

Answer :Should be stored in Credential Manger

Study the following process flow on the Main Page of a process where the intention is to preserve the current exception.

What is wrong with the design?


Options are :

  • The exception handling is not within an Exception Block.
  • The exception caught by Recover2 will not be preserved by the Re-Throw Exception stage
  • The Send Alerts process will never be run
  • Because the flow is on the Main Page of the process there should be a ‘Re-Throw' Exception stage as there are no parent/calling pages for the exception to ‘bubble up' to.

Answer :The exception caught by Recover2 will not be preserved by the Re-Throw Exception stage

Consider the following process flow:

What is the problem with this flow?


Options are :

  • There is nothing wrong with this flow.
  • The exception handling in this flow can be removed because an Attach action in a navigate stage should always work if configured correctly
  • The Attach Block should be enlarged to also include the ‘Waited Long Enough?' decision stage.
  • The flow contains a recover stage and a route from it without a resume stage. This will cause internal error on future exceptions thrown in the same session.
  • The 0.5 second wait stage should be removed so that the retries can be performed at full speed.

Answer :The 0.5 second wait stage should be removed so that the retries can be performed at full speed.

Blue Prism Developer Certification AD01- Exam Dumps Set 6

Which of the below actions are mandatory actions in Business Object?


Options are :

  • Initialize and clean up
  • Login and logout
  • Launch and terminate
  • No actions are mandatory

Answer :Initialize and clean up

A Process is configured as follows


Options are :

  • Read details stage reads the bank account number from target application. User wants not to show the account in logs. What should be done to skip the logging of Bank Account number?
  • Stage logging on read stage should be disabled or changed to errors only
  • Logging should be disabled on the execution machine of the process
  • Bank account number should be saved in password type data item
  • Blue Prism automatically detects the sensitive data like Bank accounts, credit card number etc.

Answer :Stage logging on read stage should be disabled or changed to errors only

Which stage(s) can be configured in process to send Input and output parameters to another page or another process?


Options are :

  • Start Stage
  • End Stage
  • Both Start and End Stages
  • None of the Above

Answer :Both Start and End Stages

Blue Prism Developer Certification AD01- Exam Dumps Set 2

An action called "Activate window" fails with following exception

"Warning – Highlighting results – More than one matching window found"

What might have caused the above exception?


Options are :

  • The element used in the Input User Credentials stage could not be found in the application
  • "Activate window" stage could find multiple elements conflicting with the element referenced in "Input User Credentials" stage
  • ""Activate window"" stage is trying to attach to application
  • An action "Activate window" is not does not exist on the page

Answer :"Activate window" stage could find multiple elements conflicting with the element referenced in "Input User Credentials" stage

Study the process flow below:

The outputs for the Get Next Case are configured below:

What is the correct configuration of the Expression in the "Case-Returned" decision stage?


Options are :

  • Case ID <>""
  • Account Details <>""
  • "Case ID" <>""
  • [Case ID] <>""

Answer :[Case ID] <>""

Which of the following indicates a case in a Work Queue is an exception?



Options are :

  • Option A)
  • Option B)
  • Option C)
  • Option D)

Answer :Option D)

Blue Prism Developer Certification AD01- Exam Dumps Set 2

Which of the following statements regarding the use of Work Queues are correct? (select 2 responses)


Options are :

  • Control Room allows filtering of the displayed queue items using exact tags and by using wildcards
  • Wildcards are not allowed in the Tag Filter property of the Work Queues business object Get Next Item action
  • Work Queue item Status can only be set to Completed or Exception
  • Tags can be used allow flexibility in the order items are worked within a single Work Queue

Answer :Control Room allows filtering of the displayed queue items using exact tags and by using wildcards Tags can be used allow flexibility in the order items are worked within a single Work Queue

The Work Queue ‘Account Closure has a number of Pending Items which may be tagged as "Current", "Saving" or "Loan". What is the correct configuration to get the next item from the queue that is tagged either "Current" or "Loan"?


Options are :

  • Configure "Current or Loan" in the Tag Filer parameter
  • Configure "-Saving" in the Tag Filter parameter
  • Configure "Current; Loan" in the Tag Filter parameter
  • Configure "Current + Loan" in the Tag Filter parameter

Answer :Configure "-Saving" in the Tag Filter parameter

Which of the following can you perform in Control Room?


Options are :

  • Create a Work Queue
  • Refresh a Work Queue
  • Encrypt a Work Queue
  • Rename a Work Queue

Answer :Refresh a Work Queue

Blue Prism Developer Certification AD01- Exam Dumps Set 1

In which of these scenarios is it OK not to use a Blue Prism work queue as part of your Blue Prism solution?


Options are :

  • A Blue Prism work queue is not required for simple linear processes that do not work multiple cases
  • A Blue Prism work queue should always be used. It eliminates the risk of contention and allows you to gracefully pause the queue at any time.
  • A Blue Prism work queue is not required if the business process interfaces with a Work List system with-in-built capability to ensure multiple users cannot work the same case at the same time.
  • A Blue Prism Work Queue decreases the scalability of the solution and therefore should only be used for complex scenarios such as multi-day processing.

Answer :A Blue Prism work queue should always be used. It eliminates the risk of contention and allows you to gracefully pause the queue at any time.

Blue Prism work queue has some exception cases with "Automatically set exception at clean up" as the exception reason. Which of the following caused?


Options are :

  • No exception block was not mentioned in the code
  • A resume stage was not encountered when in recovery mode
  • Developer mentioned "Automatically set exception at clean up" as Exception reason in mark as exception
  • Blue Prism has obtained a separate case from the queue before declaring the previous case as exception or completed

Answer :Blue Prism has obtained a separate case from the queue before declaring the previous case as exception or completed

Which of the below statements is incorrect about exception handling in Blue Prism?


Options are :

  • A page can only use one Recover stage unless Blocks are used
  • Exceptions can be handled anywhere in Business Objects and Processes
  • A page can have multiple Blocks, if they do not overlap
  • Blocks can overlap and Blocks can be nested

Answer :Blocks can overlap and Blocks can be nested

BluePrism Developer Certification (AD01) - Practice Tests Set 3

There is requirement that process can be stopped from the control room whist the process is in execution. A flag data item called "stop ASAP" is used in the process flow. What exposure should be given to the "stop ASAP" data item?


Options are :

  • None
  • Environment
  • Session
  • Static

Answer :Session

An action called "application-login" fails with following exception

"Internal: failed to perform step 1 in Write Stage ‘Input User Credentials' on page ‘Log In' – unable to match any window with query terms"

What might have caused the above exception?


Options are :

  • The element used in the Input User Credentials stage could not be found in the application.
  • "Input User Credentials" stage could find multiple elements conflicting with the element referenced in "Input User Credentials" stage.
  • "Input User Credentials" stage is trying to attach to application.
  • An action "Input User Credentials" is not does not exist on the page "Log In".

Answer :The element used in the Input User Credentials stage could not be found in the application.

Which of the following is not an Application Modeller Mach type Operator?


Options are :

  • Dynamic
  • * (Wild Card)
  • .*(Reg ex)
  • Substring

Answer :Substring

Blue Prism Masterclass-ll. Business Savvy Architects Set 1

A process contains only 4 stages. Study the following process flow:

The data item ‘Result' is a number data item with an initial value of 2.

The calculation stage is configured as follows:

Following the execution of the Perform Calculation stage, which of the following is true?


Options are :

  • The data item Result will contain 3
  • The data item Result will contain 5
  • The process will throw an exception
  • None of these statements are correct

Answer :The data item Result will contain 3

What will happen when you execute the Create Date stage?


Options are :

  • 5 days will be added to today's date and the result stored in the New Date data item.
  • 1 month will be added to today's date and the result stored in the New Date data item.
  • Week will be added to today's date and the result stored in the New Date data item.
  • 1 year will be added to today's date and the result stored in the New Date data item.
  • The process will throw an exception as the New Date data item is null.

Answer :1 month will be added to today's date and the result stored in the New Date data item.

Which of the following indicates a case in a Work Queue is Successfully Completed?


Options are :

  • Option A)
  • Option B)
  • Option C)
  • Option D)

Answer :Option A)

Study the following diagram which is an extract from a sub-page of a process being tested in Process Studio:

There are no breakpoints in the "Access Customer Account" subpage however there is an error.

What will happen if you choose to step out (SHIFT +F11) when debugging the process?


Options are :

  • The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus would move to the breakpoint at "Get Customer Details" stage.
  • The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus would move to the "Recover1" stage.
  • The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus would move to the stage containing the error on the "Access Customer Account" page.
  • The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus would move to the "Exception1" stage.

Answer :The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus would move to the "Exception1" stage.

Study the following diagram which is an extract from a process being tested in Process Studio:

There are no breakpoints in the "Access Customer Account" subpage however there is an error.

What will happen if you choose to step over (F10) when debugging the process?


Options are :

  • The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus will move to the "Get Customer Detail" stage.
  • The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus will move to the "Recover1" stage.
  • The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus will move to the stage containing the error on the "Access Customer Account" page.
  • The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus would move to the appropriate recover stage on the "Access Customer Account" page.

Answer :The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus will move to the "Recover1" stage.

Examine the following process flow;

The Orders Collection contains the following data:

The Saved Quantity Data Item is configured as a number with the initial value 0.

The Loop Orders stage is configured to loop through the Orders collection.

The Get Quantity stage is configured as follows:

What will the data item Saved Quantity contain after the execution of the page?


Options are :

  • 5
  • 9
  • 10
  • 19

Answer :19

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions